Monthly Archives: August 2012

General Safety Issues

PREVENTING WORKPLACE VIOLENCE (Guest Post)

 Over the last decade there were more than 7,000 homicides nationwide that occurred in the work place, according to the U.S. Bureau of Labor Statistics. Most of these homicides involved robberies by an unknown assailant, while 1,000 involved work colleagues. 

CCTV Cameras has become an effective means in the prevention of crime as well as supporting local authorities in identifying assailants. CCTV camera video is often used in the courtroom to assist in the determination that a crime was committed and by whom. 

Traditional robbery, which usually targets convenience stores, banks, etc., has caused an increase in security.  Too, the recession has driven potential thieves to even more desperate measures by targeting business offices. Offices can provide easy access to expensive items like laptops, cell phones and unattended cash. An employee’s sense of safety and security along with a company’s reputation can be destroyed from violence perpetrated by thieves, disgruntled former employees, angry customers and even bitter spouses. To prevent these occurrences, employers are installing CCTV Cameras to deter crime.  CCTV cameras include Bullet Cameras, Dome Cameras, Full Size Cameras and PTZ cameras, which are available with multiple features and are adaptable to any location, both inside and outside the property, in daylight or darkness.  In the event a crime occurs, CCTV cameras can capture the crime and suspects and replay it instantly. 

 Employers and employees working together should develop unified policies and procedures to help make their places of business safer. With everyone being involved and knowing there is a plan in place can in itself be a deterrent to workplace violence.  To start developing a plan of action here are few tips and suggestions to get started: 

  • Create policies and procedures for properly handling an incident and ensure your employees are well trained. If policies exist, review them periodically to ensure they are up to date.
  • Consider hiring a security agency to survey the workplace and identify vulnerabilities.
  • When hiring employees or contractors, complete a full national background check.
  • Install CCTV cameras to monitor and record both inside and outside of the building. It is a valuable tool for helping to identify perpetrators and aid law enforcement agencies before, during, and after a crime has been committed.
  • Implement an access control system and/or a visitor management system. 

Safety tips for employees: 

  • Stay aware of your surroundings.  Take note of unfamiliar people that may be acting suspicious or are without the proper identification, such as a badge or an I.D. card.  Immediately report them to your company’s security department.  Never approach anyone you think may pose a threat.
  • If you feel uncomfortable walking to and from your car, ask for an escort from the building security or a trusted co-worker.
  • Never leave your purse or other valuables in an unlocked drawer in your desk.  A majority of robbery related incidents in the workplace are related to personal theft.
  • Make a request to add CCTV security cameras in common areas that may be off the main path or in isolated areas.
  • Learn what your company’s policies are in the event of an evacuation or lockdown.  Know exactly where to go and what to do. 

The Security Product Depot is an established online provider of physical security products. As an innovative supplier of online security solutions, they are committed to offering the broadest array of CCTV camera systems, door hardware, locks, and safes for securing government, school facilities, commercial businesses and residents.  

Written by Mike Hassebrock from The Security Product Depot

 

 

 

 

 
 
Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection

A GUIDE TO SAFETY EQUIPMENT FOR RENOVATION AND CONSTRUCTION (Guest Post)

According to the Occupational Safety and Health Administration (OSHA) under the United States Department of Labor, there were 4,690 workplace fatalities in 2010 alone out of which 774 were in construction. These deaths were mostly related to safety hazards that could have been potentially avoided. The number one cause of death was falling, followed by electrocution, then being struck by an object, and lastly getting caught in or between things. These four major causes were addressed by OSHA and guidelines were provided to ensure safety among construction and renovation workers.

The proper use of safety equipment can also prevent injuries and fatalities at construction sites. Although required by law in many states, a large number of workers tend to ignore the importance of safety equipment. The following steps are guide to using safety equipment for renovation and construction work.

Avoiding Falls With Proper Fall Protection Equipment

Personal fall protection equipment is a necessity at any construction site. Whether the renovation or construction requires climbing high buildings or remodelling a small home, safety equipment is absolutely essential. Falling is the number one cause of death at construction sites, making protection against it highly important. Some of the main reasons for falling include floor openings, unprotected walls and side holes, wrong scaffold construction, protruding steel and iron bars, and portable ladder misuse.

OSHA requires that any openings six feet or more should be protected with a guardrail or safety net system. Moreover, all construction sites should be inspected prior to work for any hidden openings or holes that can pose a danger to workers. These “fall prevention systems” are known to be a better option than “fall protection systems.” Fall protection systems consist of safety equipment like safety belts, full body harnesses, lanyards, lifelines, rope grabs, shock absorbers, carabiners, and anchors. All fall protection systems must be checked for size, manufacturer’s identification, usage, date of manufacture, and model number.

Safety Equipment to Avoid Electrocutions

Electrocution is the second main cause of deaths among construction workers. Some of the serious forms of danger that workers are exposed to when working around electrical materials include thermal burns, arc flashes, electric shocks, and blasts. There are two protection systems that need to be in place when working with electricity: Insulating Protective Equipment (IPE) and Personal Protective Equipment (PPE).

1. Insulating Protective Equipment (IPE)
According to OSHA the following insulation protection should be included when dealing with electricity: 

  • Insulation should be provided for “(rubber) line hose, blankets, and hoods”
  • Insulation for “barriers made of fiberglass or phenolic resin”
  • “Live-line tools, such as hotsticks, switchsticks, and shotgun sticks”
  • “Plastic or fiberglass hardcover items that can be installed with live-line tools”

2. Personal Protective Equipment (PPE)
Workers are required to use Personal Protective Equipment and workwear to protect against electrical hazards. The US Department of Labor suggests that all workers should be provided with training on how to properly use PPE. Security and hazard assessment should also be performed prior to any electrical work to judge the amount and level of PPE needed. Here are some of the PPE frequently used when working with electrical equipment:

  • Eye and face protection, such as safety glasses and face shields
  • Rubber gloves with insulation and leather protection
  • Industrial Hard hats
  • Safety shoes
  • Insulating sleeves
  • Chemical protection gloves
  • Flare resistant clothing

 Similarly, “struck-by” and other construction related fatalities can be avoided if proper measures and safety plans are put in place. OSHA requires that these measures are also taken care of when using construction vehicles. All vehicles must be fully inspected to guarantee functioning lights, brakes, mirrors, and other areas operating safely. To prevent hazards from falling objects, always make sure to wear a hard hat, goggles, and other protective gear. Load-carrying vehicles should be checked for safety prior to usage and all tools should be secured in place to avoid falling on people.

Almost all injuries and deaths can be avoided if workers are provided with proper guidelines on how to operate under different conditions with the necessary safety equipment. While some workers often tend to neglect these safety measures assuming that they are mere hindrances to their workflow, these measures are put in place for a reason — the safety and security of themselves and those around them. 

Below are listed some useful resources for those people that want to find out and read more about this topic:

Resources
http://www.osha.gov/oshstats/commonstats.html
http://www.osha.gov/SLTC/etools/construction/index.html
http://www.worksafebc.com/publications/health_and_safety/by_topic/assets/pdf/fall_protection.pdf

 

Our thanks to Lucy James for this very helpful article! pb

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Home Safety Products, Weather Protection

TEN SMART TRICKS FOR SUMMER (Guest Post)

Ah, the warm summer months are here, which means more time spent outside running around enjoying the outdoors. It also means occasionally battling the bugs, the sun, and the heat.  To ensure that these and other common summer annoyances don’t derail your summertime fun, here are 10 smart tricks that can help make your summer a little sweeter:

1. Keep a dryer sheet in your pocket to keep bugs away.  You can spend tons of money buying bug spray, and you’ll most likely end up feeling sticky, smelling like bug spray, and getting bitten by bugs anyway. An easy solution is to carry a dryer sheet with you, which is something most people have at home already anyway. By carrying it in your pocket you can ward off bugs; something about the smell keeps the bugs away from you.

2. Sprinkle baking soda in sweaty shoes.  Running around in your shoes without socks is a regular occurrence during the summer time because everyone just wants to slip shoes on and go. Unfortunately, this also causes extra unwanted odor in your shoes.  To fix this problem sprinkle the inside of the shoes with baking soda to absorb the odors.  If you’d rather not have the powdery look in your shoes, you can create a sachet by using a rubber band wrapped around a few tablespoons of baking soda in a handkerchief.   Just put a sachet in each shoe and the odors will disappear.

3. Trap fruit flies with apple cider vinegar.  Did you bring home fruit flies from the farmers market?  Fill a glass jar half full of cider vinegar and screw the lid back on.  Punch several holes in the lid and leave the jar where you have seen the fruit flies.  They will be gone in no time.
4. Cool a sunburn with white vinegar.  Unfortunately, with the warm summer months comes the occasional sunburn.  To take the sting out of a sunburn soak clean soft cloths in white vinegar, wring them out and lay them on the sunburned skin.

5. Coat feet with petroleum jelly and cover with socks at bedtime.  This trick will keep your feet soft and sandal ready all summer.  A little petroleum jelly on your elbows and knees will make sure they stay soft and smooth for all of those revealing summer outfits.

6. Mix a can of cola with ketchup for a quick and easy barbeque sauce.  Figure out about how much sauce you want and add the cola to the ketchup to thin it out and add flavor and sweetness.  Brush on chicken or ribs during the last stages of cooking on the grill to avoid burning.
7. Use conditioner to shave your legs in a pinch.  Did you forget to pack your shaving cream for your vacation?  That’s okay; you can use the sample bottle of conditioner that most hotels give you.  This will leave your legs smooth and silky soft.

8. Apply coconut oil to bee stings and bug bites.  Coconut oil has anti-inflammatory properties and will help heal the sting or bite as well as soothe the pain.

9. Straws make great strawberry hullers.  Take a normal straw and push it up through the base of the strawberry and come up under the hull.  Keep pushing and the hull will usually come right out.  Practice makes perfect with this, but it really works well when you get the hang of it and you won’t have all those strawberry seeds under your finger nails.

10. Use cute cupcake papers to cover your drinks this summer.  When the weather turns nice, eating and drinking outside becomes standard, and almost mandatory.  The problem with eating and drinking outside is keeping the bugs away from your food and drinks.  Get yourself some cupcake papers and use them to cover your drinks.  If you’re having a party the cupcake papers can even match the theme.  To make a drink cover you just need to punch a hole in the cupcake paper and stick a straw through.  Just make sure there are no bugs inside the straw before you drink.

Carrie: may I add one last suggestion to help – wear polarized sunshades that block out UVA and UVB rays to protect your eyes, and a good hat for your head.  Anything that will keep us from burning is welcome in the summer!  Thank you for these good ideas, pb
Carrie Dotson, http://www.summernannyjobs.com/blog/10-smart-tricks-for-summer/