Yearly Archives: 2013

General Safety Issues, Hand Protection

SIMPLE DIY TIPS TO MAINTAIN YOUR PLUMBING SYSTEM (GUEST POST)

 

Plumbing is an essential of modern life, so when a problem occurs within a drain or fixture, it needs to be dealt with right away. From toilets and bathtubs and garbage disposals and water heaters, each fixture gets daily use. In addition, the pipes that deliver clean water to your home and the waste water and sewer lines that take it away all need regular maintenance to operate efficiently and effectively. As a homeowner, you can minimize the risk of plumbing system problems by following these simple DIY tips for drain cleaning and unclogging toilets and pipes.

Unclogging Toilets
A clogged toilet can quickly lead to a big, smelly mess. To begin, turn off the water supply to the toilet. To do this, locate the metal knob behind the toilet and turn it as far to the right as it will go. If a small object such as a toy has fallen into the toilet, put some rubber gloves on and manually extract the item or use the handle of a toilet brush to fish it out of the bowl. For clogs due to toilet paper or waste, vigorously plunge the toilet with a rubber plunger. Lastly, try a toilet snake to push through the clog. These devices can be purchased at your local hardware store.

Drain Cleaning
All sorts of debris can make its way into the drains of sinks, showers and bathtubs as well as from the washing machine. Hair, soap scum, toothpaste, food and for families with children, any small object that could fit into the drain could be lurking within the pipes. Keeping the drains clear can prevent an unsightly and unwholesome mess from happening. To keep drains clean, take these steps:

*Every two or three days, run hot water down the drain for several minutes. This liquifies solid or thickened debris like soap scum and grease.

*Once each week, pour one to two tablespoons of baking soda down each drain. Follow this up with 1/4 cup of white vinegar or lemon juice. Allow the mixture to bubble and sit for 30 minutes before using that drain. Then flush the drain with hot water for several minutes.

*For kitchen sinks, send a brine solution through once each month to get rid of grease buildup from cooking and washing greasy dishes.

*Use a drain strainer to collect hair and lint in shower drains and washing machine drains. These can also prevent unwanted items such as washcloths or bathtub toys from going down the drain and creating a clog.

Check for Leaks
Check for leaks in faucets, underneath sinks and around tub and toilet seals at least once each week. Most faucet leaks result from a worn out washer, which is easily replaced in just a few minutes of time. If there is discoloration of the wood, mold or mildew growth or moisture present under a sink, there is likely a leak. Some toilet leaks can be fixed by adding more caulk, while other leaks may be more serious and require replacement of some of the plumbing materials or even the entire toilet. Peeling paint, mold or dampness on a wall or a warped floor are signs of a leaking pipe within the wall or floor. This situation usually requires the expertise of a professional plumber.

Our thanks to Ryan Edun, for these helpful tips.  These weekly maintenance ideas would also be a good idea for offices and other places of work. pb

First Aid Safety, General Safety Issues, Weather Protection

NOAA PREDICTS HEAVY HURRICANE SEASON – 2013

 

Era of high activity for Atlantic hurricanes continues

In its 2013 Atlantic hurricane season outlook issued today, NOAA’s Climate Prediction Center is forecasting an active or extremely active season this year.

For the six-month hurricane season, which begins June 1, NOAA’s Atlantic Hurricane Season Outlook says there is a 70 percent likelihood of 13 to 20 named storms (winds of 39 mph or higher), of which 7 to 11 could become hurricanes (winds of 74 mph or higher), including 3 to 6 major hurricanes (Category 3, 4 or 5; winds of 111 mph or higher).

These ranges are well above the seasonal average of 12 named storms, 6 hurricanes and 3 major hurricanes.
 
“With the devastation of Sandy fresh in our minds, and another active season predicted, everyone at NOAA is committed to providing life-saving forecasts in the face of these storms and ensuring that Americans are prepared and ready ahead of time.” said Kathryn Sullivan, Ph.D., NOAA acting administrator. “As we saw first-hand with Sandy, it’s important to remember that tropical storm and hurricane impacts are not limited to the coastline. Strong winds, torrential rain, flooding, and tornadoes often threaten inland areas far from where the storm first makes landfall.”

Three climate factors that strongly control Atlantic hurricane activity are expected to come together to produce an active or extremely active 2013 hurricane season. These are:

  • A continuation of the atmospheric climate pattern, which includes a strong west African monsoon, that is responsible for the ongoing era of high activity for Atlantic hurricanes that began in 1995;
  • Warmer-than-average water temperatures in the tropical Atlantic Ocean and Caribbean Sea; and
  • El Niño is not expected to develop and suppress hurricane formation.

“This year, oceanic and atmospheric conditions in the Atlantic basin are expected to produce more and stronger hurricanes,” said Gerry Bell, Ph.D., lead seasonal hurricane forecaster with NOAA’s Climate Prediction Center. “These conditions include weaker wind shear, warmer Atlantic waters and conducive winds patterns coming from Africa.”

NOAA’s seasonal hurricane outlook is not a hurricane landfall forecast; it does not predict how many storms will hit land or where a storm will strike. Forecasts for individual storms and their impacts will be provided throughout the season by NOAA’s National Hurricane Center.

New for this hurricane season are improvements to forecast models, data gathering, and the National Hurricane Center communication procedure for post-tropical cyclones. In July, NOAA plans to bring online a new supercomputer that will run an upgraded Hurricane Weather Research and Forecasting (HWRF) model that provides significantly enhanced depiction of storm structure and improved storm intensity forecast guidance.

Also this year, Doppler radar data will be transmitted in real time from NOAA’s Hurricane Hunter aircraft. This will help forecasters better analyze rapidly evolving storm conditions, and these data could further improve the HWRF model forecasts by 10 to 15 percent.

The National Weather Service has also made changes to allow for hurricane warnings to remain in effect, or to be newly issued, for storms like Sandy that have become post-tropical. This flexibility allows forecasters to provide a continuous flow of forecast and warning information for evolving or continuing threats.

“The start of hurricane season is a reminder that our families, businesses and communities need to be ready for the next big storm,” said Joe Nimmich, FEMA associate administrator for Response and Recovery. “Preparedness today can make a big difference down the line, so update your family emergency plan and make sure your emergency kit is stocked. Learn more about how you can prepare for hurricane season at www.ready.gov/hurricanes.”  

This past week,  May 26 – June 1, was National Hurricane Preparedness Week. To help those living in hurricane-prone areas prepare, NOAA offered hurricane preparedness tips, along with video and audio public service announcements in both English and Spanish, featuring NOAA hurricane experts and the FEMA administrator at www.nhc.noaa.gov/prepare/.

NOAA’s outlook for the Eastern Pacific basin is for a below-normal hurricane season and the Central Pacific basin is also expected to have a below-normal season. NOAA will issue an updated outlook for the Atlantic hurricane season in early August, just prior to the historical peak of the season.

NOAA’s mission is to understand and predict changes in the Earth’s environment, from the depths of the ocean to the surface of the sun, and to conserve and manage our coastal and marine resources. Please pay attention to warnings and stay safe.  This season has already brought killer tornadoes; now we must watch for hurricanes on the coast.

Here are some tips for hurricane/storm preparation from an earlier Blog4Safety post:

  •        Secure your home;
  •        Have a plan that includes your family, elderly, and pets;
  •        Be sure your insurance papers are in order;
  •        You need to have a 3-day supply of non-perishable food and water for each individual;
  •        Have a emergency safety kits and flashlight;
  •        Be sure you have all medicines;
  •        Notify next of kin or friends that you may be needing to stay with them until the all-clear;

 Source: NOAA

 
 
Eye Protection, General Safety Issues, Hand Protection, Protective Clothing, Respiratory Safety

WORK SAFETY TIPS FOR PRESSURE WASHING (GUEST POST)

Pressure washing is an excellent way to clean the exterior surfaces of a commercial building, keep parking lots looking nice and make the vehicles in a fleet sparkle. Power washing also helps commercial kitchens eliminate grease from hood/duct systems and deep-clean their entrances. If you choose to perform your own power washing in-house instead of having a professional service help you with your commercial cleaning needs, safety must be a top priority in order to keep your employees safe – and your property undamaged. 

Pressure Washing Safety Tips 

Personal Safety 

  • Always follow the manufacturer’s instructions for equipment use and maintenance.
  • Wear protection like eye goggles, face masks, close-toed shoes with rubber soles, ear protection, long pants and long sleeves.
  • Do not use a pressure washer when other individuals are present, unless they’re also wearing safety gear.
  • Prepare for the power washer’s kickback by assuming a solid stance and holding the spray gun with both hands.
  • Do not use a gas power washer indoors.
  • Never spray water from a power washer onto yourself, others or animals.
  • Be aware of your surroundings before you spray, and be extra-careful around service feeds, power lines and electrical meters.
  • Always point the pressure washer’s nozzle in a safe direction, even when the equipment is off and the water is disconnected.
  • Do not use a pressure washer while standing on a ladder, scaffolding or other unstable surface.
  • As soon as you turn off the washer and the motor or engine stops, release the pressure within the gun by squeezing the trigger.
  • Avoid leaving a pressure washer unattended.
  • Do not spray windows or electrical wiring.
  • Do not allow minors to use a power washer. 

Equipment Safety 

  • Before using a pressure washer, always check the level of engine oil.
  • Avoid overfilling the engine crankcase when adding or changing the oil.
  • Test the power washer settings in an inconspicuous area before beginning work. This safety step will help you determine if you’re using the right pressure settings, nozzle type, water temperature, nozzle distance and cleaning solution.
  • Use only cleaners that are formulated for pressure washers. Never use products that contain bleach or are acid-based.
  • Do not use warm water in a power washer unless you are 100 percent sure the pump is designed for it.
  • Store the pressure washer in a room that’s climate-controlled and has good ventilation. If you’re storing the washer in an unheated room, winterize it so freezing temperatures don’t cause damage.
  • Make sure you use the appropriate nozzle for the cleaning job to avoid damaging the surface you’re cleaning.
  • Clean the chemical injector when you finish using the power washer to prevent the buildup of chemicals.
  • Connect and turn on the water supply before turning on the pressure washer.
  • Do not refuel the pressure washer while it’s running. Instead, turn off the machine and wait two minutes.
  • Turn off the pressure washer before adjusting the spray or spray pattern.
  • Turn off the power washer if you think you won’t pull the trigger for two minutes or more.
  • Regularly have an authorized service center maintain your pressure washer. 

Pressure washing is a cost-effective way to maintain the appearance and safety of a business. If you’ve never used a pressure washer, have a professional service provider teach you how to use the machine efficiently and safely. 

With more than fifty years of industry experience, Scotts Pressure Wash delivers high quality pressure washing results to improve a business’s bottom line. Scotts has seven locations in Canada, including Calgary pressure washing and Vancouver power washing services. Scotts is certified through the Power Washers of North America (PWNA) and is an “Environmentally Aware” Certified Contractor offering green pressure washing solutions.

Thanks, Guys, for this interesting info; I believe I will leave this task to you pros! pb

Eye Protection, General Safety Issues

WHEN LIGHTING IS A SAFETY ISSUE IN THE FACTORY ENVIRONMENT: ALL THE TIME (GUEST POST)

2 Comments

Modern factories—with their often-automated machinery, forklifts moving materials to necessary stations and loud mechanical noise levels that often prevent vocal warnings—are among the most potentially injurious places to work. According to a standard text on the topic, “Industrial Safety & Environment” by Amit Gupta, factory lighting is the single most important environmental variable effecting employees’ safety, comfort, satisfaction, efficiency and productivity.

Minimum OSHA Illumination Requirements in Machine Shops & Assembly Areas

Indeed, lighting in such industrial areas is so important as to be regulated by the Occupational Health & Safety Administration (OSHA). The organization mandates minimum levels of lighting in areas depending upon the complexity of bench and machine work in the area. Simple or rough assembly requires 20 to 50 foot-candles of illumination, moderate bench work needs 50 to 100 foot-candles, difficulty assembly work demands 100 to 200 foot-candles of lighting while very fine precision bench work requires 200 to 500 foot-candles to safely and properly perform the job.

Types of Illumination

There are three major types of lighting required by OSHA to be available in the workplace. These include:

· General Lighting

Although experts in the field report that natural light is less stressful to the eye, it’s not an option for factories usually constructed over a large area that precludes natural light from reaching the interior of the workspace. Even if skylights are provided in a one-story factory to provide natural illumination, weather conditions can’t be controlled to ensure that the minimum degree of illumination required by OSHA is required.

For the typical factory, general lighting is that illumination provided by evenly spaced overhead light fixtures attached to the ceilings. Usually fluorescent, this lighting provides a consistent degree of illumination that can be measured by a light meter to ensure compliance with governmental regulations. The care and maintenance of this equipment is usually the responsibility of the plant maintenance department due to the equipment necessary to reach the lighting equipment.

· Task Lighting

Task lighting is illumination provided to spotlight aspects of workers’ specific job functions and is the most important type of lighting in terms of safety and injury prevention. This type of illumination can be provided by a number of different lamps, often attached to workbenches and moveable to allow employees to specifically adjust the light to their needs. Because of the strong association between adequate task lighting and injury prevention, replacement bulbs for these types of lamps or moveable bench lights need to be readily accessible to workers or floor supervisors in the event that a bulb expires during a worker’s shift.

· Emergency Lighting

Emergency lighting refers to illumination devices designed to turn on automatically in the event of a power failure or other emergency where workers’ vision can be challenged. These lights consist of illuminated emergency doors and may include lights along evacuation routes to the emergency doors.

Other Benefits to Proper Lighting

Benefits to the factory owner from provision of adequate lighting include fewer injuries, fewer loss days due to injury and increased productivity. The degree of improved efficiency and safety combined with the greater production output is said to offset the cost of providing proper illumination throughout the facility.

Sent by Maire Hunter.

General Safety Issues, Health Issues

SAFETY COMPLIANCE IS ESSENTIAL DURING HAZARDOUS WASTE REMOVAL (GUEST POST)

This post was written Duane Neukom, Marketing Manager at WasteXpress, a hazardous waste removal company. The company provides on-site disposal, transportation and industrial services to businesses across Oregon and Washington. 

In 1999, the United Nations Environmental Program estimated that industrialized countries produce up to 400 million tons of hazardous waste each year. Hazardous waste is any type of waste that poses a threat to the environment or public health. The Resource Conservation and Recovery Act (RCRA) states that hazardous waste falls into two categories: characteristic and listed wastes. Characteristic hazardous waste products are those that are corrosive, reactive, ignitable or toxic. Listed hazardous waste products are those that regulatory authorities deem as hazards, such as F, K, or P-listed. By applying proper hazardous waste removal transportation practices, you can remain compliant with the law while reducing waste and keeping the public and land safe.                

 

Hazardous Waste Removal Transportation Process 

All companies that produce hazardous waste must follow the hazardous waste removal guidelines outlined in the RCRA and Hazardous Materials Transportation Uniform Safety Act (HMTUSA). The first step in the professional waste removal process is classification. Waste classification, or characterization, helps determine if waste is hazardous or non-hazardous, as well as whether it is a characteristic or listed hazardous waste product. The classification process helps businesses reduce waste, promotes recycling and conserves resources. 

After the waste is classified, a hazardous waste removal company creates a shipping name during the waste profiling process. Waste profiling is the process of describing the characteristics of hazardous and non-hazardous waste so professionals can confirm the appropriate treatment methods or the recyclability of the materials.  

Before transport, a waste removal company affixes the shipping names to the containers holding waste products; prepares the shipping papers; and mark the containers with the appropriate warning labels. 

Hazardous Waste Removal DOT Compliance 

The U.S. Department of Transportation (DOT) created the Hazardous Waste Materials Transportation Act to ensure the safe transport of all hazardous materials. Hazardous waste transporters are subject to DOT, EPA and RCRA regulations, including: 

Obtaining an EPA identification number. This ID number helps keep track of hazardous waste and its transporters. 

Compliance with the manifest system. Hazardous waste transporters cannot transport waste unless a manifest accompanies the materials. The manifest must stay with the hazardous materials at all times. When the waste arrives at its destination, the recipient must sign and date the manifest. 

Use of DOT shipping papers and labels. The shipping papers created during the waste profiling process help the transporter and public know how to combat a spill or exposure if there’s an accident. The labels placed on the outsides of the containers should contain the name of the shipment, EPA ID number, United Nations number, packaging specifications and the appropriate handling guidelines or warnings. 

The proper handling of hazardous waste discharges. Even when waste is removed and transported safely, it can still be dangerous, especially if there’s an accident. In the event of an accident, the waste transporter must notify the appropriate authorities, such as the National Response Center. 

Hazardous Waste Removal Documentation and Manifests 

To help make filling out shipping papers and manifests simpler for transporters, the EPA and DOT created a Uniform Hazardous Waste Manifest that complies with the RCRA. This uniform manifest helps eliminate variability among different states, as well as the need to fill out state-specific manifests, and it makes shipment tracking easier. As of September 2006, the use of the uniform manifest is mandatory in all 50 states. 

Under the RCRA, the shipping papers or manifests that accompany hazardous waste must provide the following information: 

  • Details about the company that generated the waste.
  • Details about the facility that will receive the waste.
  • Description of the quantity of waste, including the number of containers and the container types.
  • Details about how the waste will arrive at the receiving facility. 

After a shipment of hazardous waste arrives at its destination, the client and transport company should receive copies of the signed manifest for their records. 

The proper removal and transport of hazardous waste is vital to public and environmental health. By working with an established waste removal company that’s licensed by local DEQ, EPA and local DOT, you can rest assured knowing your company is in compliance and the transport company is up-to-date on the latest waste removal laws.

Workers who are involved with hazardous materials must have the proper personal protective clothing for the particular risks involved in their job.  When cleaning up following an accidental spill of hazardous materials, it is imperative that all safety precautions are taken. pb

General Safety Issues

SAFETY TIPS FOR PREVENTING INJURIES FROM WORKOUTS OR WORK (GUEST POST)

People love to exercise and keep healthy, but a few  precautions should be taken in order to prevent an injury during your workout.  Some typical workout injuries can include; knee or shoulder injuries, wrenched  ankles, dislocated or sprained wrists, shin splints or tendinitis, and many  other general muscle pulls and strains. Here are five safety tips for preventing injuries during your  workout, each aimed at helping you to keep yourself safer. (You might consider using a lifting belt to support your back.) Besides suffering  fewer injuries, you will also find yourself able to keep a steady exercise  schedule thanks to less downtime:

Warm Up and Cool Down

One of the very best ways to avoid injury is to do a complete  warm up and cool down before and after every workout. A warm up should be about  10 minutes long, allowing your heart rate to increase slowly and loosening up  your muscles; a warm up could include jogging in place, jumping rope, or riding  an exercise bike. Your cool down should be 5-10 minutes of walking, or other  slow exercise, to reduce your heart rate back to its normal pace. It is also  recommended that you spend some time doing a thorough stretch both before and  after warming up and cooling down, helping your muscles to prepare and cope,  respectively.   Take the time to do this before beginning your days’ work, as well.

Use Proper Equipment

A second tip for an injury free workout is to make sure that  you always have the proper equipment. For example, if you are a runner, your  sneakers should be your primary focus, whereas bicycle riders should ensure  that their helmet fits snugly and properly. You want to make sure your clothes  are not too baggy, as they could get snagged on a machine causing you a great injury.  If you have a workout room at work, take advantage of this before or after work, or during lunch break.

Work with a Trainer

The best thing about this tip is that it involves friendly  support! It is suggested that before starting any new exercise program, you  speak with a certified trainer; one chosen specifically to suit your needs.  Most gyms will offer this service free  with a membership, or you can pay them an hourly rate for the first few  sessions. These experts will guide you into a routine that is right for you. A trainer will show you all of the correct ways to perform  your exercises, and they will offer advice on the right amount of weights and  rest times, helping you to maximize benefit while limiting risk. They will even send workout information home with you, so you can exercise there, as well.

 Know Your Body

The fourth step is all about knowing your own body and paying  attention to your weak areas. Got a trick knee? Then don’t run on the treadmill  or use the stepper. Same goes if you have a bad back; there would be a few  machines and stretches that you simply should not indulge in, at least right  away. By being aware of the spots on your body that are weak, you can start to  wake them up with slow and gentle exercises, working safely towards more vigorous  exercise.  One way to fit exercise in at work is to park farther away, and take the stairs rather than elevator.  If your job requires repetitive lifting, get a partner to help you with loads that are too heavy.

Get Plenty of Rest – Your Muscles Need It

And finally, after all that exercising, you’ll need to rest!  You should take one or two days a week off to rest and allow your muscles to  heal, giving them the time that they need to strengthen and mend, and limiting  your risk of straining or pulling something. If you are sore or nursing an injury, use the RICE method: in particular: rest your injury, ice  the sore spot, compress to minimize swelling, and elevate to reduce blood flow.

You probably can’t take off work to rest your muscles, so by gradually getting used to the exercise involved in your daily routine, you will be able to work off soreness each day.  Get plenty of rest at night.

Author Byline:  This post was written by Anna Fox, who writes about fitness and dieting, and is passionate about healthy food, active lifestyle and self-improvement.

General Safety Issues

WHAT YOU CAN LEARN IN FORKLIFT TRAINING (GUEST POST)

Operating a forklift takes skill, practice and extreme caution. Many accidents have occurred from mistakes made by forklift operators and could have been prevented with stronger safety training and enforcement. Because of the extreme danger from forklifts, adequate training completed before one is certified to operate them. If you are taking forklift-training classes here are some things to expect.

Classroom Sessions and Hands-On Training

 In your forklift training, you can expect a classroom session with an instructor of approximately 4-6 hours. The instructor will teach you what you need to know about operating the forklift. He or she may use a variety of methods to teach the class such as lecture, PowerPoint, showing a forklift training video or DVD, demonstrating stability using a model and moderating classroom discussions. In addition to the classroom session, there will be hands-on training where you will work with the forklifts. Here you will be shown the forklift and have the opportunity to operate it with the guidance from your instructor. Depending on prior experience the operators may need hours or days of practice operation before they are ready for their final hands on test.

 The Parts of a Forklift

 You will also learn the parts of a forklift. The forklift is similar to a car in some ways, but there are also some major differences, such as the forklift having rear wheel steering.. You will learn about this machine, how it works, and the unique aspects of it. You will learn what all the controls do and how to work them.

 Understand Reasons to Work Safely

 Obviously throughout your training you will be taught safety procedures for operating the forklift. In addition, you will understand the specific reasons why these precautions are put into place. Your instructor will teach you to understand not just “what to do and what not to do,” but why it is important to understand these reasons in the first place.

 Real Consequences of Poor Safety Decisions

 You will be informed of real consequences that could result of poor safety decisions. The forklift is a powerful machine and if you are not safe with it, it could result in severe injury or even death to yourself or others. You will be shown the severity of consequences of not operating the forklift with caution.

 Identify and Correct Safety Problems

 In addition, you will be taught how to identify and correct safety problems when using the forklift. When you operate a forklift, you will be making judgment calls the entire time. You will be given various scenarios and told how to identify and correct safety issues. This will thoroughly prepare you for operating the forklift on your own.

Forklift Maintenance

Just like vehicles need proper maintenance, the forklift does as well. In your training you will be taught what to do to provide maintenance for the forklift. A forklift inspection needs to be conducted and passed before each shift to ensure proper safety for everyone involved.

Written by Written by Dan Smith of Forklift Training Systems, an industry leader in forklift training products and services.

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing

IF CAMO IS YOUR STYLE, YOU’RE GONNA LOVE THIS!

Living in Texas, we see many folks wearing camouflage-style clothes.  Why, I even have a camo t-shirt, and I don’t hunt, work with gloves or do anything that qualifies me to wear it, other than it’s prety cool!

This pattern has been popular for a long time, so what better chance than to display the variety of camouflage products that Texas America Safety Company offers than right now?  Be sure to check out the entire page, and see why these are too good to pass up.  The MCR gloves, as stated in the description, support the Wounded Warriors project.  Portions of your purchase go to that great group.

If you prefer wearing, say, patriotic hardhats to work, we have a bunch for you to choose from.

Look for yourself, and see what we have to offer.  If you like something, be sure to mention you read about it on the blog, and you’ll receive a 5% discount, as stated at the beginning of our blog. 

Thank you for your time, and all the folks at Texas America Safety Company wish you a safe Memorial Day.  We hope everyone who travelled  arrives safely at home, ready to get back to work tomorrow!

Eye Protection, First Aid Safety, General Safety Issues, Head Protection, High Visibility Safety

SIX TOP SAFETY CONSIDERATIONS FOR LAND SURVEYORS (GUEST POST)

In most countries, construction work represents the most dangerous industry in terms of injury and fatality rates per year. Though land surveyors aren’t necessarily classed as construction workers, they do carry out their jobs in similarly hazardous situations – mines, busy highways, mountainous areas and construction zones to name a few. Below are 5 major safety risks associated with land surveying, highlighting the truly diverse range of dangers to be wary of. 

Distracted motorists

Land surveyors will often spend time by roadsides, close to fast moving traffic. After driving for a while looking at nothing but the road in front of them, motorists can often become distracted if they suddenly see a person from the corner of their eye. This can and does often result in traffic collisions and can be dangerous for surveyors standing nearby. There are safety procedures to follow however – workers are advised to place safety signs and cones in the appropriate places. Most countries also have regulations relating to the minimum distance a surveyor should be from the roadside. 

Snakes and insects

It is not uncommon for surveyors working in places like jungles and deserts to come into contact with insects, spiders and snakes. To help prevent against bites and stings, workers should wear snake-proof boots and clothing that covers as much bare skin as possible. Also, carrying a first aid kit as well as a bite kit is a must. 

Unstable surfaces

Mountain ranges represent another varied terrain where surveyors carry out their work. Things to consider include unstable rock faces and frostbite for those who are nearer the peaks. Safety harnesses and cables should be used for the former group and appropriate thermal clothing should be worn for the latter. 

Construction hazards

When land surveyors are called out to construction sites, they should be briefed on that site’s safety procedures. It is the worker’s duty to wear appropriate safety gear such as hard hats, tough work boots, high visibility vests and any additional gear that is required, such as eye and hearing protection. 

Heat exhaustion

Any outdoor work carried out in hot climates represents a number of health hazards, and surveying is no different – sunstroke, dehydration and sunburn to name a few. To protect against the sun’s effects, surveyors should wear hats, heat reflective clothing, apply sunscreen and drink plenty of water. An often overlooked consideration is to take regular break in the shade. Canvas umbrellas can be brought to places where shade is at a premium, such as deserts. 

Remote locations

For surveys to be carried out in barren locations, ensure all equipment is tested before the journey begins. Packing a spare tire, a first aid kit, food and water, GPS system and phones will come in handy in emergency situations. Vehicles should also be thoroughly tested before embarking on the journey. 

This guest post was brought to you by Technics Group,  an expert in land surveys and utility mapping, based in the UK.

 

 

General Safety Issues

MEMORIAL DAY – 2013

At the time of this writing, we are about mid-way through the Memorial Day Holiday.  Please don’t forget why you have the day off tomorrow: on the last Monday of May, Memorial Day is celebrated in the United States, as a day of paying tribute to the memory of those who died while serving our country in wars. It was first observed in 1866.  We continue to honor those who gave their lives in the process of holding on to the freedoms that we enjoy.  For anyone who loved a person missing in action, from wars as far back as WWII, Korea, Vietnam, and forward, it is a day of honoring their loved ones, whom they miss every day, unsure of what happened to them. 

Many events throughout the country are planned for tomorrow:  parades, picnics, military cemetery honors, and countless others.  You can look on your search engine and ask for Memorial Day, and you get all types of things:  Memorial Day Sales, When is Memorial Day, What is Memorial Day, etc.  Our hearts are with those who have been victims of tornadoes, floods, and wildfires in the past several days.  Keep them in your thoughts, as their weekend has been one of trying to put their lives back together. 

We hope you will arrive safely at home if you have travelled this weekend, and begin your new work week with a fresh perspective on looking at things in a more appreciative way.  We are fortunate that we have our military service men and women who “have our backs.”  So, we honor those who are in far-away places, missing the celebration of family and friends.  We pray for their safe return. 

Happy Memorial Day, and May God Bless America !