Monthly Archives: December 2019

Weather Protection

How HGV drivers can stay safe on the roads during bad weather

Written by Peter Scully

Driving an HGV in bad weather can make for great TV, but in real life it can make a difficult job even more challenging. Fortunately, there are steps you can take to keep yourself safe on the roads even in bad weather.

Remember engines don’t like cold

Engines depend on fluids running through them (e.g. oil and petrol). The colder it gets, the more these liquids solidify and the more they solidify, the longer it takes to warm them up to the point where they run freely.

This means that as temperatures begin to drop you want to start allowing extra time for your engine to warm up before you start driving. In early winter 5 minutes might do it, but when temperatures are at their lowest, you might need to allow as much as 15. It’s important to do this because it will keep your engine, literally, running smoothly, which keeps you safer and reduces the chances of it being damaged.

You need to be able to see where you’re going

One of the liquids in your engine will be windscreen wiper and you need to make sure that this is fully topped-up and also that it has antifreeze in it, for when temperatures drop below zero.

Visibility is always an issue in bad weather, especially in the colder months when there is minimal daylight, so you will need to make a particular effort to make sure that your windscreen is always kept clean (and hence clear) along with your mirrors and lights. You can take care of all this while your engine is warming.

Salt is good for tires but bad for metalwork

Salt or grit may help your tires to grip but it does not replace good treads so keep a particularly close eye on how your tires are wearing. Salt is horrendous for bodywork (and the abrasiveness of grit isn’t good news for it either). You’ll therefore have to make a point of cleaning the metalwork regularly; otherwise you will wind up with rust issues.

Wind speed means wind strength

The faster a wind is blowing the stronger it is. This probably won’t be too much of an issue if an HGV has a decent load in it, although you will have to drive with extra care. It can, however, be a serious safety threat to empty HGVs which, while heavy vehicles, are light enough to be tipped over in strong gales.

Ideally, you should avoid driving at all in this kind of weather, however, if you absolutely must, go slowly and keep as far to the curb side of the road/motorway lane as you possibly can. That way if the wind starts pushing you to the side you have a bit more time to respond before being pushed across the road into another lane.

Standard driving rules apply even more than usual

Driving an HGV is an exercise in thinking ahead to anticipate and avoid difficult situations. The problem in bad weather is that the limited visibility restricts your ability to see the road and hence limits the information available to you. Because of this you need to slow your speed as much as you can and be extra-aware that you are maintaining safe distances.

NDS are a certified HGV driver training school based in Nottingham, UK. 

Uncategorized

How to Stay Safe When Working With Chemicals

Written by Liam Smith

Laboratory work can be dangerous and even potentially life-threatening. This is why safety is paramount in any environment that includes work with harmful chemicals. A great majority of laboratories experience spills every single week, despite safety protocol. The reason for this is that neither personnel nor management is completely familiar with the way they should handle dangerous substances. To increase safety in the workplace, you need to adhere to a set of common-sense safety procedures that will help keep chemicals in their containers and workers safe from harm.

  • Follow procedures to the letter.

While employees are never enthusiastic about having to deal with complicated protocol, it’s an essential part of safety in the workplace. It’s especially important when it comes to dealing with dangerous substances and caustic chemicals.

Always read through the instructions that come with any new chemical that enters your lab. This will give you a good idea of what you’re up against. If it’s something particularly toxic, you’re going to be notified and you’ll know to handle it with care. Countless accidents and injuries occur due to personnel not taking new chemical shipments seriously. This is easily remedied with a little light reading. Once you’re familiar with the chemical, you can follow protocol for this type of hazardous substance.

  • Wear protective equipment

Before you even come close to being in contact with any chemical agent, you need to make sure you have adequate gear that will protect you from any potential damage. If you’re familiar with the chemical in question, you should know the exact gear you have to use to handle it. If it’s a new addition to the lab, reading the instructions will often tell you what kind of protective equipment you’ll want to use.

Personnel sometimes disregard safety gear, whether it’s because there isn’t enough gear for everyone on a given day or the substance isn’t too dangerous. However, there are protective pieces you must wear when handling specific kinds of chemicals. Safety goggles are absolutely essential when working with flammable agents like acids and bases. There’s no telling when they might react with an unexpected substance in the environment.

Spills aren’t at all uncommon in laboratories and industrial settings, which is why having a protective coat is also crucial. Without one, you constantly at risk of exposing your skin to a chemical spill.

  • Keep it clean and tidy

A clean workspace is a safe workspace. Accidents and spills don’t just happen out of the blue. There are factors that influence the likelihood that a chemical will be mismanaged. The state of the work floor is one of them. A cluttered and dirty workspace can very easily cause employees to trip and fall while handling delicate chemical containers. When this is allowed to occur, spillages become more frequent.

Make sure that the work floor is given a thorough cleaning on a regular basis. Laboratories shouldn’t be too cluttered and overcrowded, as this only further increases the risk of an accident. Have adequate storage for paperwork and materials so that they aren’t kept in inopportune places. Bio-friendly detergents are recommended for cleaning, as frequent scrubs will increase the amount of harmful fumes in the air.

  • React swiftly

Working with chemicals always entails a certain level of risk. Even when every safety precaution is taken and protective gear is applied, it’s still possible for some exposure to chemicals to occur. In these scenarios, you have to utilize your training to prevent any serious damage from occurring.

Should a chemical find its way outside of its container and near personnel, make sure that employees can quickly find their way to a safety shower. Clearing the chemical spill should be your second priority. Utilize emergency spill kits to take care of most of the hazardous spillage and clean up the remainder of the substance that is left over. It’s crucial that the spill isn’t able to cause additional harm to personnel.

  • Label items properly
  • One of the first mistakes personnel make when dealing with hazardous chemicals is to delay labelling them. A lot of times, you’ll receive a shipment of chemicals that need to be transported, but they will have scarce labels or their next container won’t have any. This is something that is very easily remedied with something as simple as a sticky note.

Optimally, proper labels should be applied, which contain a handy message or symbol that will let other personnel know what they are handling. Delaying this process will only endanger the next person that has to transport the chemical.

Conclusion

Dealing with harmful chemicals is a dangerous, but necessary job. To prevent dangerous situations from occurring, management and cleaning crews need to make sure that personnel are given ideal working conditions where they aren’t likely to be injured. Even in the unlikely case of spillage and exposure to hazardous materials, there should be precautions in place that prevent things from getting out of control and causing significant injuries.