All posts by Doug

CLUING YOUR KIDS UP ON THE DANGERS OF ELECTRICITY (Guest Post)

As we move into a technological world, electricity has become a big part of our lifestyles, from our televisions at homes to our computers in our workplace. It’s more than likely that you’ve probably been shocked by static electricity before, like when you walk across carpet or when you go to touch a car door, but as electricity becomes a vital part of modern life, we forget just how dangerous electricity can be. According the electrical safety council, during 2011/2012, there were 2,899 fires, 223 injuries and 10 deaths from electricity supply such as wiring, cabling and plugs. These figures emphasise just how important it is to treat electricity with respect.

Children are naturally curious and don’t know the dangers of electricity. With your children growing up in the technological generation, it is vital to educate them so that they understand the dangers of electricity. Of course you don’t want to completely frighten your children, but teaching them the basics about the power of electricity can keep them safe.  Here’s a few methods you can use to get your kids more clued up about electrical hazards.

Safety Lessons

Although electricity safety starts in the early years of school, it’s important that you educate them at home as well. Make learning fun by giving your children some fun activities to complete around electrical safety. There are lots of different child friendly YouTube videos on electrical safety as well as interactive games and quizzes available on the internet that they can complete to help them remember important facts.

If your children are slightly older (8 and above) get involved with your children by starting to let them use electrical appliances themselves. Give them the opportunity to show you how they understand the dangers of electricity by letting them, for example, show you how to work a microwave in a safe way. Supervise them and talk them through the steps until they can talk you through the steps themselves. Praise your children to show them how pleased you are that they understand how to be safe around electrical devices and they’ll feel rewarded.

Lead by example

You’re children learn a lot from the way you behave so don’t let your child catch you mistreating electrical objects, as its more than likely that they follow your bad habits. So when you go next go to get your piece of toast out of the toaster with a metal knife, don’t – for your own safety as well as your child’s.

Make sure you don’t leave any electrical appliances unattended or cords draping over surfaces, where small hands and mouths might be able to get hold of.  Keep any appliances out of reach and for smaller electrical appliances, like a hairdryer, make sure you store them away or put them in a place out of reach of your children.

Check your appliances

Take the time to take a look at your appliances to see if they are safe. It is sometimes possible to see when your appliances look unsafe, for example if the cords are looking frayed or if there are any burn marks on the sockets. If any of your electrical cords are looking this way, don’t try and ‘patch’ them up as this is only increase the danger for you and your family.  If you don’t trust your own judgement, it’s always worth getting in an expert with electrical test equipment to double check your devices and replace them.

Make it clear to your children that electricity is dangerous

If you have very young children that are too young to understand detailed explanations about the dangers of electricity, be clear and use strong, consistent language so they learn to understand that they are not to approach electrical devices because they are dangerous.  As they start to get older you can gradually start to begin to give them more detailed explanations as to why electrical appliances are dangerous.

The earlier you start to teach your children about the dangers of electricity, the better educated they will be, reducing the risks of them getting hurt.

 Our thanks to Katharine Ogilvie,  katherine@fountainpartnership.co.uk;

Fountain Partnership Ltd is registered in England and Wales as company number 7551957

 

The Importance of Having the Right Electrical Cables for Your Business (Guest Post)

From multiple modes of transportation to oil and gas rigs to wind turbine farms, electrical cables are crucial to many industries and the safety of their operations. For the aerospace industry, cables transmit electricity and data to make the plane work properly and allow pilots to communicate with on-the-ground personnel. In the food industry, cables keep factory lines moving while also boosting production efficiency. For miners, cables are necessary to keep everything from shuttle carts to mining pumps running smoothly. Why does this matter? It means that, whatever your specific industry, you probably have a need for working electrical cables that can withstand various temperatures, pressures and situations in order to protect you and your work environment. How do you choose the right kind? 

To help answer that question, here are some elements of your business to keep in mind when choosing cables — so you can be sure you pick the best, safest options for your business and employees: 

Temperature: In situations where circuits must keep running even under extreme temperature changes, such as in furnaces, ovens, cooking equipment or lighting fixtures, cables must be resistant to heat. If the cables aren’t properly fire-resistant and/or high-temperature rated, they could be severely damaged, which would then cause major damage to equipment and personnel. So when looking at cables, ask yourself the following questions relating to temperature: 

  • How hot or cold will the cables get in my application?
  • Could these cables withstand the temperatures involved in this job? 

Pressure: For industries that must utilize high-pressure sprays on equipment, such as the food industry, for example, the continual pressure on cables can wreak havoc over time. That’s why these situations call for tough, durable cables that can withstand abuse without threatening your business operations. To know you’re choosing durable cables that can withstand pressure, ask the following: 

  • What sort of pressure will these cables be exposed to?
  • Are the cables I’m purchasing specially designed to hold up to high pressure? 

Environmental Changes: Think about the specific environment into which your cables will be placed. Is it on a moving piece of equipment? Will it be exposed to chemicals on a daily basis? Will they be exposed to wash downs? Is your cable hanging and exerting tension? Do you need it to remain flexible in all situations? Is it buried underground? If so, you’ll need cables that are specifically designed to stay functional in any environment. Whether for a large ship or at an oil site, cables that can’t withstand environmental changes could cause disaster. Ask yourself: 

  • What sort of environmental changes will these cables experience?
  • Can the cables I’m buying handle swings in temperature, movement, chemicals, tension, etc.? 

Costs: As with any aspect of business, budget is always an important factor to keep in mind. Part of choosing the right cables for your budget is understanding how much “replacing” failing cable costs your production schedule from a pure cable cost and lost production hour cost. If your cable is failing over and over again, chances are you may be choosing the wrong cable product for the application. This costs your company money. The initial investment in choosing the right cable for your application can save your company money since it will last longer and require less replacements, hence saving production and labor costs. 

Before selecting the cables for a given application, think through these questions: 

  • How often am I replacing cable in this application?
  • How many employees does it take to replace the cable? How long does it take them to do? How many applications are changed out per day?
  • Is it possible that there is a longer lasting cable available to me?
  • Could I save my company money by investing in a longer lasting cable? 

How are cables used in your industry? Whether it’s mining, utilities or government, there’s a good chance cables are involved. When selecting cables for your next project, use the elements listed above to know which to choose.

 

About the author:

Carol Sabovik is the Marketing Manager of TPC Wire & Cable Corp. (http://www.tpcwire.com/) in Macedonia, OH. TPC Wire & Cable is a leading wire and cable manufacturer for many markets, including industrial manufacturing and the automotive industry. TPC’s products are designed and engineered to withstand harsh conditions including abrasion, chemicals, constant flexing and extreme temperatures.

What Are Landlords’ Gas Safety Obligations? (Guest Post)

Landlords have a duty of care to ensure the health and safety of their tenants, and should take reasonable steps to do so. One of the most important regulations landlords in the UK must adhere to is the Gas Safety (Installation and Use) Regulations 1998. These oblige landlords to ensure that every relevant gas fitting and flue is maintained safely in order to prevent their tenants suffering from illness or injury.

This involves conducting gas appliance services every 12 months and keeping a record of these checks for two years. The record should answer the following questions:

–          When was the appliance or flue checked?

–          What address did the check occur in?

–          What is the name and address of the landlord or agent that controls the property?

–          Where are the appliances located?Gas-safety

–          What kind of gas appliances are they?

–          Were any problems noticed?

–          Were any defects repaired?

–          Was the flue’s effectiveness checked?

–          Was the supply of combustion air examined?

–          Was the heat input or operating pressure examined?

–          Was the operation of the appliance checked?

–          Was the landlord or agent notified of any defects?

–          Who carried out the check?

–          What the Gas Safe Register registration number of the person who carried out the check?

This record should also be provided to the tenants of the premises, and when a new tenant moves into a property, they should be provided with a copy of the most recent record.

Landlords’ gas safety obligations are not solely confined to the rooms their tenants live in, but also any communal areas, such as hallways and walkways. Landlords must also not merely ensure their gas appliances are serviced, but are also responsible for any repairs and maintenance that their appliance may require. It is best practice to repair any defects as soon as possible – not only could delays cause harm to tenants, but tenants may even try to reclaim part of their rent through the small claims court if they do not feel that their landlord kept their property up to standard.

Gas appliances that are in parts of a building solely occupied for non-residential use do not come under the Gas Safety (Installation and Use) Regulations 1998, nor do any gas appliances tenants provide themselves. However, it is best to have any gas appliances owned by the landlord and any flues that are connected to tenant’s gas appliances checked annually; this may help landlords to meet any additional duties they have under the Health and Safety at Work etc Act 1974.

If a tenant’s central heating shuts down due to a boiler breakdown or disconnected by an engineer, landlords must provide their tenants with alternative emergency heating until the heating is back on. It is illegal to use gas appliances that have been deemed as unsafe or that are suspected of being hazardous; therefore, landlords must not encourage their tenants to use any appliances that have been classed as unsafe and should arrange repairs as quickly as possible. Landlords who have any doubts over an engineer’s advice should still adhere to their advice, but can contact the Gas Safe Register for further assistance in the interim.

Kevin Burke

Kevin Burke writes about health and safety on behalf of boiler breakdown cover specialists 247 Home Rescue.

ARE WE READY FOR A BIOLOGICAL ATTACK? (GUEST INFOGRAPHIC)

We just received this very interesting infogram from securitydegreehub.com/bioterrorism.  No one wants to even think about such a terrible thing happening to anyone; but from the history and information below, it has occurred with devastating results.   We must be better prepared. 

Drugs and Money: The Costs of Addiction (Guest Post)

Chances are that you know someone who currently struggling, or has struggled, with addiction. http://www.bestmastersincounseling.com/ has created an infographic detailing some of the statistics behind addiction, along with the costs and benefits of treatment.

The impact of addiction is shocking. From lost time at work to crime-related costs, addiction costs $600 billion per year. That number boils down to $1,800 per man, women, and child in the United States. $193 billion going to tobacco, $193 billion to illicit drugs, and $335 billion in alcohol.

And while you may think that addiction doesn’t affect you, 2 out of 3 drug users, are employed, and 1 in 12 full-time workers are using drugs regularly. Only 10 percent of individuals with substance abuse problems will seek treatment.

This infographic also details the cost of drugs like meth, cocaine, and prescription medications, along with the costs of jail time, treatment, and healthcare costs. For every $1 invested in substance abuse treatment, we save $7 in healthcare and criminal justice costs.

Feel free to like, comment, and share this infographic entitled “Drugs and Money: The Costs of Addiction” brought to you by http://www.bestmastersincounseling.com/.

 

Poole Gas Fitter Fined After Illegal Boiler Installations Put People In Danger

This article comes from the United Kingdom.  An illegal gas fitter from Poole has been fined after putting people in danger by breaching gas safety regulations.  It teaches us the lesson that we must hire competent, licensed contractors to install systems in our homes.  Colin Yeatman, who lives on Gort Road and traded as COB Plumbing Ltd, installed a hot water system, gas cooker and gas coiler at a new-build property in Poole during 2012, and fitted a gas boiler at a Broadstone house in 2010.

fIRE

However, although he was performing work on gas appliances, he was not qualified to do so. He left the appliances in a hazardous condition after falsely claiming to be on the Gas Safe register.

A council building inspector examined Yeatman’s gas work on the Poole property, and discovered that although COB Plumbing had been put down as the installer, the official documents used another gas engineer’s details.

A Gas Safe Register Investigations Officer took a look at Yeatman’s work and discovered seven different defects, two of which were found to put people at risk of injury and death.

The Health and Safety Executive (HSE) was told about the failings and discovered that neither Yeatman nor COB Plumbing were Gas Safe-registered.

Then, in 2013, the owner of the boiler in Broadstone noticed that the appliance was leaking. An engineer was called and identified a number of different defects. The HSE then discovered that Yeatman had used another firm’s details on the official documentation for the boiler installation, and that this other company had been registered as Gas Safe.

In a hearing on April 2nd in Bournemouth Magistrates Court, Colin Yeatman admitted four different breaches of the Gas Safety (Installation and Use) Regulations 1998. He was fined £1,000 ($1,659) and will have to pay additional costs of £500 ($829). COS Plumbing also admitted four breaches of the 1998 regulations and was fined £10,000 ($16,589) with costs of £8,056 ($13,360).The regulations that Yeatman and COS Plumbing pleaded guilty to breaching are as follows:

  • – Regulation 3(1), which prohibits people from working on gas fittings if they are not competent to do so
  • – Regulation 3(3), which prohibits people who are not on the Gas Safe Register from performing work on gas fittings and pipework
  • – Regulation 3(7), which prohibits people from falsely claiming to be on the Gas Safe Register
  • – Regulation 26(1), which prohibits people from installing gas appliances in such a way as for the appliance to pose a danger to people
  • – Regulation 4, which calls for employers and self-employed persons to take reasonable steps to ensure gas work they control is performed by approved persons

Mehtaab Hamid, an inspector for the HSE, called Yeatman’s actions “quite deliberate”. He noted that the offender was aware that he needed to be Gas Safe-registered if he was to perform his work legally.

Mr Hamid said that Yeatman was not competent or qualified to work on gas appliances, but chose to do so regardless. The substandard work he performed put residents at risk, he added.

Gas Safe Register Chief Executive Russell Kramer advised people to check engineers’ ID cards when the engineer is fixing or fitting gas appliances.

This article was written by Kevin Burke on behalf of boiler breakdown cover specialists 247 Home Rescue.

Why Being A Lifeguard Is More Than Just A Name (Guest Post)

We love to think that being a lifeguard is just a name, and it has nothing to do with anything else other than the pool management. But if you think being a lifeguard is all about a teen in high school who is smeared with SPF 30 and stretching out in a chair, and all this lifeguard does is just double-checking on drowning children, you are totally wrong. This is because lifeguard is not just a useless title of a job. It has all the characteristics of being important. It’s a tough job, but yes, someone has to do it. 

So, you’ve finally decided that you want to make a career out of it, and you know you are proud to be called as a lifeguard? The thing is that you have to know that deep inside your heart; this is what you want. That is why we would like to tell you the importance of being a lifeguard. You are not just defending your own safety because every day when you go to work you are expecting the unexpected. That is why it is very crucial for someone who desires to become a lifeguard to go for a lifeguard training. The number one role of a lifeguard is to ensure that every swimmer at pools and public beaches have a safe environment. Lifeguards are advanced swimmers who are trained through swimming programs especially under International Lifeguard Training Program (ILTP). 

If you desire a job where you can make a difference every day and is full of challenges, the first thing you need to do is to apply for a lifeguard training with Jeff Ellis Management or with any other certified swimming programs. You will be trained about anything related to safety and rescue, public beaches and pool management, and your routine role as a lifeguard in monitoring all activities in the water. Other than that, you will also learn that instead of watching people from faraway, you will still need to interact with them by teaching swimming lessons and the safety rules.

Lifeguard1

Lifeguards are trained to be completely calm especially when it involves emergency rescue procedures. They are not just excellent swimmers; they are lifesavers. That is why you can see that whenever there’s an emergency where a swimmer is cramping, fatigued, injured, or at risk for any other unknown reasons, a lifeguard will dive into the water to save the swimmer. In some cases where it takes time for paramedics to arrive, a lifeguard will be the one performing the on-site emergency response. All of these are impossible to be performed if a lifeguard did not go through  lifeguard training. It also take a lot of confidence for a lifeguard to be able to do an evacuation and make a huge announcement should the place of recreation is not safe for public. 

Being a lifeguard is more than just getting the worst tan lines ever, or to smell like chlorine once you get back home. It’s about a commitment toward a responsibility of ensuring one’s life is secured while you’re on duty. If anything happens, you will be asked about it, and that is why getting the proper training will give you an insight of what exactly a public beach or pool management is. Since every day when you go to that same swimming pool or public beach, you get the chance to become the hero of the day. Does it sound interesting to you?

Note: We want to thank Mickey Colon of jeffellismanagement.com for this insight into exactly what it takes to become a lifeguard.  People who choose this profession will not only be working on the beaches, but protecting swimmers in college pools, city pools, and recreational centers.  It takes someone who can pay attention for hours to everything going on in and around the pool.  It does seem glamorous, but it is a very important job.  Knowing CPR and having the appropriate first aid equipment plays a huge part in saving lives.  pb

RINGING IN THE FACTS ABOUT CELL PHONE OVERUSE (GUEST INFOGRAPHIC)

Our thanks to Ashley O’Connor for this infographic, which depicts potential health effects of excessive mobile phone usage. Basically, it shows different health problems we may get from over using our mobile phone.  First and foremost, as Ashley says, please do not use your cell phone to text while you are driving!  I will admit that I am among the 67% that checks my cell phone even if it hasn’t rung!  However, I am not addicted to using the phone or tablet. Most folks will tell you that they sometimes find it irritating to visit person to person with someone who is texting on their phone rather than participating in the conversation. Food for thought! pb

Fatal and Non-Fatal Injuries In The Workplace

This interesting infographic is from Rebecca Fox, of Westermans International, a UK-based welding company.  We appreciate this shared information and can learn what illnesses are prevelant in their respective industries.