Category Archives: Eye Protection

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection

WAYS TO INSPIRE YOUR EMPLOYEES ABOUT THE NEED FOR WORK SAFETY (GUEST POST)

Work safety and sound precautions against health hazards is indeed a major aspect of all kinds of businesses, big or small. It is necessary that employers provide all kinds of safety dress, equipment and head/body gear in order not only to ensure avoidance of work related accidents but also ensure maximum safety, security and hazard free working environment for employees at all levels of work.

The equipment that may be needed are helmets and hardhats, ear plugs,  goggles and eye care, body wear, gloves and hand wear, safety belts, care of limbs and both lower and upper extremity, stockings and boots, and so on. It is the right and privilege of each and every worker to gain protection from any kind of accident and mishaps and it is obligatory for employers to provide it to them. 

Thus employees need to be provided a safe and hazard free work place, devoid of any kind of occupation or work related risks. However, despite best efforts, accidents do occur, and some of them may be lethal and dangerous, not only involving loss of limb but also that of life itself.  Each and every work site must have medical and First Aid personnel and supplies commiserating with type, extent and degree of potential harm. Medical first aid services are addressed in specific standards for general industry, employment, terminals and construction industry. All businesses must have at least one first aid kit in office room and at construction area sites.  The presence of an Automated External Defibrillator could indeed be life saving in event of heart attacks, as well as the need for first aid kit, bloodborne pathogen kit, with gown etc, CPR pack, disposable towels, plastic use and throw gloves, facial masks for mouth, eye shield and one way face shield.
 
Most safety minded and hazard avoiding companies would need to use a regular first aid kit that would have basic first aid treatment aids like splints, gauze, antiseptics, bandages, alcohol pads and also aspirin, burn cream or burn spray containers, eye wash kit, plastic gloves, compress for head and swollen injuries and also other needed first aid supplies.  Each work environment has different safety and hazard intervention needs and requirements due to diverse kinds of injury potential and possibilities.
 
However, if the injury requires more treatment than just first aid, it is important that hospital numbers are called; meanwhile, first aid is administered as it should be done. It is necessary to research the Occupational Safety and Health Administration (OSHA) website for gaining best data on accidents and how these could be prevented.
 
The main idea behind OSHA is to offer safe and healthy working environment for working men and women by approving enforcement of required standards developed under the OSHA and by assisting and encouraging states in their endeavors to offer safe, reliable and healthy working environment by allowing research, data, education and training in the domain of occupational safety and health and for other purposes too. All field employees need these work safety even the essay writing factory workers.
 
Sent to us by Julius Kelty 
 
Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing

PROTECTING BUSINESSES AND COMMUNITIES FROM INDUSTRIAL WASTE RISK (GUEST POST)

If you live in an industrial community, it is understandable for you to be concerned about chemical spills and industrial waste. You would want a guarantee that public health is not being affected by industrial businesses. The Environmental Protective Agency has encouraged partnerships with environmental contracting companies as a helpful solution to reduce the risk of industrial waste and hazardous spills. 

If you own a business, especially a business that deals with chemical waste, there are many extensive environmental regulations that you must meet in your daily operations. Keeping up with the complexities and changes of these industrial waste laws can be a cumbersome and laborious process. However, if you ignore environmental laws, you could end up paying lots of money in fines. 

Even with the necessary precautions, chemical and petroleum spills can still occur.  When these spills happen, the law requires that specific steps be taken to protect the environment from pollution. Environmental contracting companies help safeguard industrial businesses from waste accidents. 

With the already demanding operations of construction, it can be difficult for  businesses and contractors to arrange and facilitate clean up in the event of a spill. With every passing moment, your business could be fined at a greater level when they are in violation of the environmental codes. This is where you could benefit from environmental construction companies.  They give you the confidence and assurance to operate your business freely and handle industrial waste management for you. 

These environmental contracting services are available to provide around-the-clock support for companies to help keep the environment safe from pollution and your company safe from disaster. These environmental contracting companies are highly trained experts at construction oversight, groundwater and soil treatment systems, industrial waste management and emergency disaster response. 

How Environment Specialists Serve the Industrial Community

Environmental contractors provide many benefits to contractors and communities with the expertise to clean up chemical spills and other hazards that could cost your company a fortune. 

An environmental expert is at the forefront of emerging technologies and has the latest equipment to help you keep the environment safe and construction companies protected. They will assess your construction project and the chemicals that you use in your business. They devise a customized plan based on their extensive knowledge to help you clear hazardous materials and safely and discretely dispose them off. 

This special industry is able to partner with companies in planning future projects, providing valuable expertise that can help save money and time. All of the legal aspects are already handled for their customers, and they are with you throughout every step of your project. Having an environmental contracting service by your side can also improve your chances of your work being approved your state and local agencies. 

Working with an environmental specialist will help you remain in compliance with industrial waste laws and focus on what matters to your business the most. You can take advantage of an immediate response any hour of the day and receive emergency assistance. Environmental contracting companies are a team of experts that serve the environment by partnering with industrial businesses to do construction right.  

The FGS Group is a leader in the petroleum cleanup program and a full service environmental engineering, remediation, and waste management company serving businesses in Tampa, Jacksonville, Tallahassee, Orlando, Florida and the surrounding areas. 

Note: These professional companies are trained and equipped with all the proper personal protective equipment (i.e., gloves, protective clothing, eye protection, and hazardous waste protection.) pb

 
 
 
Eye Protection, General Safety Issues, Hand Protection, Head Protection

BEST SELF-DEFENSE COMBATS FOR PERSONAL SECURITY AT WORK (GUEST POST)

 

Violence, whether it happens within the workplace or outside of it, can cause considerable harm to employee morale, increase work-related stress, and decrease the overall level of workplace harmony, not to mention the potential human resources and compensation issues.

Employers should provide their employees with a safe work environment, and indeed, some provide pepper spray, automatic locking doors, or other devices to deter attacks. Most companies have taken at least some steps to ensure that their employees remain safe. Some even provide self defense programs to teach you how they would like you to handle such incidents. Apart from the primary benefits of educating a company’s employees in a practical, effective, rapid-learning self defense program which goes far beyond just teaching “techniques”, and includes Legal and Moral Rights and Responsibilities, and Physical Tools of Self Protection – there are many other very important and beneficial reasons why every company should offer such a program. Just as with most other types of insurance, one of the benefits found is in the peace of mind and knowledge that you are protected if something should ever go wrong.  

In this article you will find the list of the 5 best martial arts techniques that can be used for self defense in the workplace. 

1.      AIKIDO

Aikido’s followers learn how to use an assailant’s strength and energy against them. Aikido is performed by blending with the motion of the attacker and redirecting the force of the attack rather than opposing it head-on. Further, if thrown to the ground, aikido practitioners are experts at falling. Thus, they are good at avoiding injuries as a result. Once on the ground, or sometimes while still standing, aikido practices joint locks and choke holds to varying extents. Thus, practitioners are capable of fighting where the majority of self defense situations go. Weapon training is common in aikido, and followers are taught to defend themselves against staffs, swords and knives.

2.      KARATE

Karate is primarily a striking art using punching, kicking, knee and elbow strikes and open-handed techniques such as knife-hands and ridge-hands. In most styles grappling, locks, restraints, throws and vital point strikes are taught. This martial art is supremely valuable because of not only its health benefits, but also its role as a self defense tool. According to the precepts, it can also be used, “… as a way of avoiding a fight should one be confronted by a villain or ruffian.” However, the karate based martial arts types are highly limited in their takedown defense instruction and grappling, so practitioners need to keep some level of distance in an altercation. On the flip side, since karate is a striking style that focuses on incapacitating strikes, it can be used against multiple attackers with a level of confidence.

3.      BRAZILIAN JIU-JITSU

Like traditional jujutsu and judo, the Brazilian form emphasizes throws and groundwork, making it a popular tool for today’s mixed martial artists. With more than 60% of any street fight ending up on the ground, Brazilian jiu-jitsu allows size and strength of the attacker to be taken out of the equation. Brazilian jiu-jitsu does not teach a fighter how to be a good stand up fighter. It does, however, teach people to avoid being hurt on their feet, take others to the ground, and then apply a submission. Further, through the use of leverage, it also teaches practitioners to take on bigger opponents and fight from their back via the use of the guard position.

4.      KUNG FU

 In martial arts circles, kung fu refers to a ton of Chinese martial arts substyles. Kung fu is primarily about striking. Thus, the majority of styles within this realm teach incapacitating strikes to vital areas. This is a good thing in a self defense situation, as speed is the key. What’s more, kung fu does teach a lot about distance control and moving in and out of harm’s way effectively, which limits the damage that can be done to you, the practitioner. Striking tends to be diverse; lots of kicks and punches, including unorthodox ones. As is the case with most martial arts, kung fu’s worth lies in both health benefits and self defense knowledge. 

5.      TAEKWONDO

In self defense, one wants to move in and out of harm’s way quickly, incapacitating an opponent along the way. This is especially true when up against more than one opponent. One also wants to inflict damage and not be hurt; taking chances isn’t always a good thing. Taekwondo teaches its followers to do just these things. Further, it teaches very powerful strikes designed to incapacitate. Taekwondo training generally includes a system of blocks, kicks, punches and open-handed strikes and may also include various take-downs or sweeps, throws and joint locks. Taekwondo practitioners are skilled in strength, stamina, speed, balance, and flexibility.

Self defense training has been shown to improve employee discipline, morale, and critical thinking; it can help to dissuade workplace violence before it starts; it improves creative problem solving skills and is excellent for building workplace unity and enhancing teamwork. Smart companies know that taking steps to keep their employees safe and healthy by implementing things like health and dental insurance, wellness programs, and on-the-job safety training is not only the right thing to do for their employees, but it’s in the best interest of the company’s own fiscal health, longevity, and success.  Furnishing them the proper personal protective equipment (i.e., safety glasses, gloves, hardhats, etc.) for their particular job is the front line of their defense. 

Author Bio: 

This article was submitted by UMA, Melbourne based Ultimate Martial Arts & Fitness school.Facebook: https://www.facebook.com/UltimateMartialArts

We appreciate this version of safety at work; it would pay if there were some employees on site that could be trained in any one of these martial arts. pb

 

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing, Respiratory Safety

STAYING SAFE IN THE OIL AND GAS INDUSTRY BY CLEANING YOUR TANKS (GUEST POST)

  Industrial accidents are more than just frustrating occurrences: they can be potentially disastrous and dangerous for employees and employers. In order to prevent these instances of injury, taking preventative measures and solving problems before they begin can help decrease the chance of problems and loss of profit. For those in the oil and gas industry, staying safe and maintaining the integrity of the product are the highest concerns. By having a regular tank cleaning and maintenance system will ensure the longevity of the product as well as the protection of the employee. 

1. Preventative Maintenance 

By regularly and effectively cleaning oil tanks, you can maintain the life and functionality of the tank. Tank malfunctions can cost companies huge losses in time, profit as well as employee attention to their other respective tasks. A tank malfunction can lead to leaks and more, which is not only time consuming to fix, but as the employer you are exposed to legal ramifications, and that’s where the real cost is going to be.

 2. Sludge Removal               

The material accumulation at the bottom of oil tanks is technically referred to as “sludge” and this accumulation can be potentially problematic if not properly and consistently removed. By using industrial tank cleaners, you can remove or regulate this sludge so that you can maintain the most product. 

3. Decommissioning 

 By cleaning oil tanks properly, the ability to decommission them can be done quickly and safely. If not, decommissioning an oil tank can be become extremely dangerous and will require more employee time and energy to take apart. 

4. Maximize Oil Recovery               

By maintaining a regular cleaning schedule for oil tanks you can also maximize the product you have. Many industrial tank cleaners can re-use the sludge by converting it back to the liquid so that there is no loss of profit. By keeping this sludge to its lowest and by using the best equipment, you can ensure that employees do not have to enter the tanks or expose themselves to harmful inhalation or accidental injury. 

5. Maximize Storage Capacity               

Maintaining proper storage space for materials like oil is crucial in keeping employees and businesses safe. If the tanks experience pressure or improper space requirements, the product risks becoming compromised and will require human intervention to correct. This is when safety becomes an issue and easily preventable.   Cleaning tanks is the key to maintaining the safe and good standing of your company. 

                This guest post was written by Steve Bronson in association with Waterline Tank Technologies. They have pioneered an inexpensive and effective method of crude oil tank cleaning.  More information can be found at http://www.waterlinellc.com/.

Note:  When workers are required to go into tanks for cleaning, much personal protective equipment is required.  Tanks are considered confined spaces, and there is the danger of fumes that can cause respiratory problems, in addition to the sludge and other hazardous materials they may have to wade through.  Companies should furnish the proper protection such as rubber boots, protective clothing, gloves, hardhats, respiratory protection, and eye protection. pb

 
Back Safety, Eye Protection, Fall Safety, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Protective Clothing

HOW FAR HAS CONSTRUCTION SAFETY COME IN 50 YEARS? (GUEST POST)

Whether you’re thinking in terms of technology, scientific knowledge, or health, there’s no denying that we’ve come a long way over the past fifty years.  Safety in the construction industry is no exception.

The most significant event occurring over the past fifty years that has resulted in safety improvements both in construction and general industry was the signing of the Occupational Safety and Health Act in 1970 by President Richard Nixon. This law resulted in the creation of the Occupational Safety and Health Administration (OSHA) as well as the National Institute of Occupational Safety and Health (NIOSH).

OSHA Standards

Initially, OSHA regulations were based on national consensus standards and began to take effect in 1971. The first standard specific to construction, however, was issued on November, 23, 1972. Since then, a number of standards affecting the construction industry have been developed. While it is beyond the scope of this article to discuss each covered topic in detail, major categories include:

o Personal protective and lifesaving equipment
o Fire protection and prevention
o Materials handling
o Hand and power tools
o Welding and cutting
o Electrical
o Scaffolding
o Fall protection
o Concrete and masonry construction
o Steel erection
o Stairways and ladders
o Cranes and derricks

The complete list of covered topics and related narrative can be easily accessed on the OSHA website.

Part 1926 contains the construction regulations with part 1910 being for general industry. However, whether one is involved in the construction business or another industry, it is necessary to refer to both, as there is a considerable amount of overlap between the two.

Additionally, it is important to keep in mind that states can, and often do, have requirements that are more stringent than the federal regulations. Twenty-seven states and territories currently operate state plans that are OSHA-approved.

ANSI Standards

Contributions from the American National Standards Institute (ANSI) have had a positive impact on safety over the past fifty years as well through the development of standards to which equipment manufacturers must adhere.

Examples include criteria for safety glasses and fall protection equipment. ANSI standards normally go into much more detail than the OSHA regulations. OSHA will incorporate them by reference into its own standards in many cases.

Safety as Good Business

Technological advancements have resulted in the reduction of hazards through more effective engineering controls and substitution of hazardous products with safer alternatives.

In addition, companies have begun to understand that an effective safety program makes good business sense. Robust safety procedures often carry over into other disciplines and positively impact things such as quality, productivity and cost control.

Hiring With Safety In Mind

Looking at a contractor’s safety record when making hiring decisions can save a company a considerable amount of future grief. For example, negative publicity resulting from a serious injury that occurs on the property, even though the injured person was a contractor’s employee, can be difficult to overcome.

During construction activities, the regulatory agencies will consider the facility a multi-employer work site and can hold both companies accountable for any safety violations. Any citations issues could result in a significant financial impact in addition to negative public relations.

A review of the prospective contractor’s OSHA 300 log, on which any significant injuries must be recorded, can provide a quick overview of how the contractor incorporates safety into the day to day operations. An unusually large amount of entries or multiple entries for the same type cause can raise a red flag that something is amiss.

Information regarding citations and fines levied by OSHA against the contractor are a matter of public record and can usually be found through a web search. When it comes to hiring a construction contractor, a small amount of due diligence up front can save a lot of regret later.

Jason Kane is an advocate of workplace safety in all industries. He is a blogger for Federal Steel Supply, Inc., the preferred choice of the global community since 1979.


 

 
Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Protective Clothing

UNIQUE SAFETY NEEDS OF WELDERS (GUEST POST)

The Unique Safety Needs of Welders

Practically any industrial production job involves some degree of risk to workers, and welding certainly provides its share. The application of high-temperature torches onto metal surfaces inevitably creates dangerously bright light, hot sparks and flying debris. As a result, welders must use specific types of clothing and equipment to meet their unique safety needs. Let’s look at some of these modes of protection.

Eyes and face – The most obvious threat to a welder involves hot sparks, bits of metal or other debris flying up into the face, eyes or hair. For this reason alone, a welder would always need to wear protective headgear that includes both a faceguard and a helmet. Additionally, however, welders must protect their eyes against dangerous frequencies of ultraviolet light that can cause serious eye damage or even blindness after prolonged or repeated exposures.

While many construction workers might simply don a pair of safety goggles (tinted or un-tinted) to keep foreign matter and bright sunlight out of their eyes, welders must be equipped with a specially designed welding hood that includes ANSI-certified shading against the hazardous UV frequencies generated by their work. Since different types of welding torches generate different degrees of UV, welders should select a model that includes protection against their specific type of job or project, based on an IR scale of 1.5 (minimum shading) to 14 (maximum shading).

Some models, such as the Pyramex Auto Darkening Helmet, can provide IR shades ranging from #9 to #13. This design also includes plenty of interior room for a respirator if needed.

Welders 1

Welders must use suitable eye and face protection against blinding, scorching sparks.

Head and ears – While a full-scale welding hood may protect the entire head, welders using just a faceguard may need to add a separate helmet to protect their hair from sparks. At the same time, however, they should also worry about flying debris entering the ear canals and causing blockages, infections or serious damage. Earplugs can close off the ear canals against this threat, while earmuffs such as the Pyramex PM1010 also protect the outer ear, provided that you can fit them underneath your helmet. These products have the added advantage of protecting your hearing in a noisy manufacturing or construction environment.

Hands and feet – A welder’s hands come closer to the source of dangerous sparks and flying debris than any other part of his body, so thick, fire-resistant gloves should be on every welder’s essential equipment list. Choose gloves specially designed for welding and other high-heat applications, such as Goatskin Tig Leather Welders or Kevlar Wool Lined 14-inch Gloves.

At the same time, however, keep in mind that sparks may also fall downward toward the feet, igniting ordinary cloth shoelaces, or a heavy piece of substrate may slip and drop onto them, causing serious injury. Leather boots with steel-reinforced toes can help protect against both of these dangers, while shoe covers can keep sparks off of laces.

Other considerations – Even if welders own all of the above items, they may need to take additional measures to protect themselves when welding. Gulfport Indura coveralls or similarly flame-resistant garments can reduce the risk of a stray spark igniting on the shirt or pants, for example. Heavy organics such as wool and cotton always make better choices than synthetics, which tend to melt when ignited.

Pants should always fit over boots instead of tucking inside them so debris or sparks cannot fall inside the boots. The sleeves should extend over the arms at all times.

Welders 2

Don’t forget the flame-resistant coveralls!

When properly used by workers (and properly required by management), these protective items can make all the difference between tragedy and “just another day at the office,” so make the effort to safeguard yourself or your employees. Happy welding!

William Reynolds has worked as a freelance copywriter since 1997. William specializes in website content, ghost-blogging, print marketing content and audio/video scripts for providers of health and safety products such as Miracle-Ear.

(Images courtesy of gameanna and suwatpo /FreeDigitalPhotos.net)

Back Safety, Ergonomics, Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Respiratory Safety

DO YOU KNOW HOW TO DO A JOB HAZARD ANALYSIS

In our blog, we are always mentioning “perform a job hazard analysis” in our safety tips; however, it made me ask: “Just exactly what is a job hazard analysis?”  So I went to the OSHA site and am sharing the instructions on how to conduct this analysis.  This information is for employers, foremen, and supervisors, but employees are encouraged to use the information as well to analyze their own jobs and recognize workplace hazards so they can report them to you. It explains what a job hazard analysis is and offers guidelines to help you conduct your own step-by-step analysis. The document (OSHA 3071)  also continues with pictures and form samples that you may use to complete your analysis.

What is a hazard?

A hazard is the potential for harm. In practical terms, a hazard often is associated with a condition or activity that, if left uncontrolled, can result in an injury or illness. Identifying hazards and eliminating or controlling them as early as possible will help prevent injuries and illnesses.

What is a job hazard analysis?

A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the relationship between the worker, the task, the tools, and the work environment. Ideally, after you identify uncontrolled hazards, you will take steps to eliminate or reduce them to an acceptable risk level.

Why is job hazard analysis important?

Many workers are injured and killed at the workplace every day in the United States. Safety and health can add value to your business, your job, and your life. You can help prevent workplace injuries and illnesses by looking at your workplace operations, establishing proper job procedures, and ensuring that all employees are trained properly.

One of the best ways to determine and establish proper work procedures is to conduct a job hazard analysis. A job hazard analysis is one component of the larger commitment of a safety and health management system.

What is the value of a job hazard analysis?

Supervisors can use the findings of a job hazard analysis to eliminate and prevent hazards in their workplaces. This is likely to result in fewer worker injuries and illnesses; safer, more effective work methods; reduced workers’ compensation costs; and increased worker productivity.  The analysis also can be a valuable tool for training new employees in the steps required to perform their jobs safely.

For a job hazard analysis to be effective, management must demonstrate its commitment to safety and health and follow through to correct any uncontrolled hazards identified. Otherwise, management will lose credibility and employees may hesitate to go to management when dangerous conditions threaten them.

What jobs are appropriate for a job hazard analysis?

      Jobs with the highest injury or illness rates;

       Jobs with the potential to cause severe or disabling injuries or illness, even  if there is no history of previous accidents;

       Jobs in which one simple human error could lead to a severe accident or injury;

      Jobs that are new to your operation or have undergone changes in processes and procedures; and

      Jobs complex enough to require written instructions.

A job hazard analysis can be conducted on many jobs in your workplace.   Where do I begin?   Involve your employees.

It is very important to involve your employees in the hazard analysis process. They have a unique understanding of the job, and this knowledge is invaluable for finding hazards. Involving employees will help minimize oversights, ensure a quality analysis, and get workers to “buy in” to the solutions because they will share ownership in their safety and health program. 

Review your accident history.

Review with your employees your worksite’s history of accidents and occupational illnesses that needed treatment, losses that required repair or replacement, and any “near misses” —events in which an accident or loss did not occur, but could have. These events are indicators that the existing hazard controls (if any) may not be adequate and deserve more scrutiny. 

Conduct a preliminary job review.

Discuss with your employees the hazards they know exist in their current work and surroundings. Brainstorm with them for ideas to eliminate or control those hazards.  If any hazards exist that pose an immediate danger to an employee’s life or health, take immediate action to protect the worker.

Any problems that can be corrected easily should be corrected as soon as possible. Do not wait to complete your job hazard analysis.  This will demonstrate your commitment to safety and health and enable you to focus on the hazards and jobs that need more study because of their complexity.  For those hazards determined to present unacceptable risks, evaluate types of hazard controls. 

List, rank, and set priorities for hazardous jobs.  List jobs with hazards that present unacceptable risks, based on those most likely to occur and with the most severe consequences. These jobs should be your first priority for analysis. 

Outline the steps or tasks.

Nearly every job can be broken down into job tasks or steps. When beginning a job hazard analysis, watch the employee perform the job and list each step as the worker takes it.  Be sure to record enough information to describe each job action without getting overly detailed. Avoid making the breakdown of steps so detailed that it becomes unnecessarily long or so broad that it does not include basic steps. You may find it valuable to get input from other workers who have performed the same job.

Later, review the job steps with the employee to make sure you have not omitted something. Point out that you are evaluating the job itself, not the employee’s job performance. Include the employee in all phases of the analysis—from reviewing the job steps and procedures to discussing uncontrolled hazards and recommended solutions. 

Sometimes, in conducting a job hazard analysis, it may be helpful to photograph or videotape the  worker performing the job. These visual records can be handy references when doing a more detailed analysis of the work.

How do I identify workplace hazards?  A job hazard analysis is an exercise in detective work. Your goal is to discover the following:  What can go wrong? What are the consequences?  How could it arise? What are other contributing factors?  How likely is it that the hazard will occur?

To make your job hazard analysis useful, document the answers to these questions in a consistent manner. Describing a hazard in this way helps to ensure that your efforts to eliminate the hazard and implement hazard controls help target the most important contributors to the hazard.

Good hazard scenarios describe:

Where it is happening (environment), who or what it is happening to (exposure), what precipitates the hazard (trigger), the outcome that would occur should it happen (consequence), and  any other contributing factors.

Rarely is a hazard a simple case of one singular cause resulting in one singular effect. More frequently, many contributing factors tend to line up in a certain way to create the hazard. Here is an example of a hazard scenario:

In the metal shop (environment), while clearing a snag (trigger), a worker’s hand (exposure) comes into contact with a rotating pulley. It pulls his hand into the machine and severs his fingers (consequences) quickly.

To perform a job hazard analysis, you would ask:

 What can go wrong?  The worker’s hand could come into contact with a rotating object that “catches” it and pulls it into the machine.

• What are the consequences?  The worker could receive a severe injury and lose fingers and hands.

• How could it happen? The accident could happen as a result of the worker trying to clear a snag during operations or as part of a maintenance activity while the pulley is operating. Obviously, this hazard scenario could not occur if the pulley is not rotating.

• What are other contributing factors?

This hazard occurs very quickly.  It does not give the worker much opportunity to recover or prevent it once his hand comes into contact with the pulley. This is an important factor, because it helps you determine the severity and likelihood of an accident when selecting appropriate hazard controls. Unfortunately, experience has shown that training is not very effective in hazard control when triggering events happen quickly because humans can react only so quickly.

Note: This very thing happened to the son of one of my friends about two weeks ago.  The fingers of the gloves he wore were slightly too long, and the glove got caught in a piece of equipment, injuring his hand before the machine could be stopped, to remove his hand.  He missed some days of work, but luckily, none of his fingers. pb

Source: OSHA

 

 

Eye Protection, General Safety Issues, Hand Protection

HOW SAFE ARE SUPERMARKET EMPLOYEES?

In a recent report from the U.S. Department of Labor, Wayne’s Supermarket in West Virginia has been cited for safety hazards in its grocery store in Mullens.  A September investigation began as the result of a complaint, and resulted in $32,200 in proposed fines.

The serious violations, (ten in all), were:

  • Electrical hazards;
  • Failure to mark exit routes appropriately,
  • Ensure workers’ wore cut-resistant gloves when cutting meat;
  • Conduct a hazard assessment to determine the need for personal protective equipment;  furnish training on use of P.P.E.;
  • Proper training on operating powered industrial trucks;
  • Provide material safety data for each hazardous material onsite;
  • Provide an eyewash station or ensure workers usage of eye protection when handling corrosive materials;
  • Train workers exposed to hazardous materials onsite, and complete a written hazard communication program;
  • Ensure guarding on the unused portion of the blade on the meat cutting bandsaw;
  • Ensure proper usage of hand tools during meat cutting operations.

Five other-than-serious violations, with a $1,400 penalty, include failing to maintain OSHA 300 injury and illness logs as well as guard overhead lights from physical damage. 

OSHA states that grocery store employers are well aware of potential safety hazards facing workers while conducting day-to-day operations.  Employers that fail to identify and correct hazards that could jeopardize worker safety will be held legally responsible.

When citations are handed out, it serves as a reminder to all of us; to be sure our place of employment is a safe one.  Because of the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees.  To obtain compliance assistance, ask questions, file a complaint, or report workplace hospitalizations, fatalities or situations that pose imminent danger to workers, the public should call OSHA’s toll-free hotline at 800-321-6742 (OSHA).  For more information, visit http://www.osha.gov.

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Respiratory Safety, Weather Protection

SAFETY IN THE U.S. AGRICULTURE BUSINESS

We recently published a guest article about farmers losing their lives on the job in Ireland.  Farmers all over the world have one of the most hazardous professions anywhere.  From those in third-world countries, to the ones with sophisticated equipment, there is still risk for injury and/or death in this occupation.

Farmers are at high risk for fatal and nonfatal injuries; it is one of the few industries where family members often share the work and live on the premises.  Many are migrant workers who may lack training or misunderstand the seriousness of the job, through language barriers.  NIOSH was developed in 1990 to create an agricultural safety and health program.  Through intramural research and funds, programs are developed at university centers in twenty states.  Programs such as these address injuries associated with agriculture, in addition to stress, musculosketal disorders, hearing loss, and pesticide exposure. 

In 2010, the U.S. had 1,823,000 full-time workers employed in production agriculture.  In 2009, an estimated 1.03 million young persons under 20 years of age resided on farms, with about 519,000 youth performing farm work.  An estimated 230,000 youth were hired to work on farms in addition to the ones who lived on the farms in 2009. 

Four hundred seventy-six farmers and farm workers died from  work-related injuries in 2010.  Tractor overturns were the leading cause of death for those involved.  Roll-Over Protective Structure (ROPS) are the most effective way to prevent tractor overturn deaths.  In 2006, 59 per cent of tractors used on the farms in the U.S. were equipped with ROPS. 

One hundred thirteen young persons (on average) die annually from farm-related injuries; most of these deaths happen to those age 16-19 years of age.  Sources of fatalaties were twenty-three  per cent from machinery (including tractors), nineteen percent involved motor vehicles (including ATVs), and sixteen per cent were due to drowning.

Around two hundred forty-three agricultural workers suffer a lost-work-injury.  At least five per cent of these leave permanent impairment.  In 2009, around 16,200 youth were hurt on farms; 3,400 were due to the actual farm work. 

Other risks that farmers are exposed to:

  • Getting kicked by animals;
  •  Work-related lung disease;
  • Prolonged sun exposure;
  • Skin diseases;
  • Hearing loss;
  • Certain cancers associated with chemical use.

The National Institute of Food and Agriculture supports the AgrAbility program, which reached newly disabled farmers and ranchers through education, assistance, and networking with on-farm assessments and assistive technology implementation on their worksites.  NIFA farm safety efforts work to assist farmers avoid workplace hazards, help those with disabilities remain employed and ensure equal access to the agriculture profession for all workers, regardless of background or ability.

Agricultural workers benefit from these efforts by increasing their knowledge of the hazards and changes in practices in order to reduce risk of exposure to those hazards.  This helps farmers remain economically competitive and safe in an often economically and physically challenging agricultural work environment.

Some of the personal protective equipment that farmers and their employees should have are good work gloves, safety glasses or goggles, knee pads, sunscreen, face masks when using pesticides or sprays, ear plugs, and a big, wide straw hat!

We thank our farmers for providing food for our tables and wish them successful harvests  in 2014.  Please stay safe.

Sources: CDC, NIOSH, NIFA

Back Safety, Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing, Respiratory Safety

MICHAEL SCHUMACHER’S SKIING ACCIDENT – WHAT LESSON DOES IT TEACH? (GUEST POST)

Nothing is considered as a failure if you learn from your mistakes and stop repeating them over and over again. The human history is full of interesting incidents that teach us plenty of lessons. However, most people are unable to learn and continue suffering because of the blunders they make. 

Even if you are not interested in knowing about the past, you just have to look around and see what is happening everywhere. You can connect to the internet and find out everything about the world in order to become more knowledgeable. Although any sort of information will help, yet the most significant piece will be the one that aims at improving your personal safety. 

People related to racing, especially on two wheels, are always at a risk of sustaining serious head injuries, thus it is extremely crucial for them to wear the right kind of protective gear that can at least prevent the brain from damage. You can easily find some high quality helmets at JS Accessories and find some other useful gear as well. 

However, racing is not the only activity that puts your life at a risk, as there are numerous other fields of life in which you have to take precautionary measures. For example, working at a construction site or a mine requires you to be fully equipped with protective helmets, goggles, boots and different other things that are necessary. 

While working at such a workplace, you should always be prepared for the worst, as there are things that are simply out of your control. Simply by wearing a helmet, you can reduce the risk to a greater extent, as this wonderful head gear saves you from direct impact. Then of course you have the skull that can also shield your brain to some extent, but that alone will not work in most of the situations. 

Recently, a legendary sportsman was involved in an accident in France that left him fighting for his life. He was neither racing someone at that time nor was he at a work station, yet you can learn an important lesson from the accident that he encountered. 

If you have not guessed it by now, the person involved in the accident was the seven-time Formula 1 champion, Michael Schumacher, who fell on his head while skiing with his son in the French Alps and sustained serious head injuries.

Luckily for the 44-year-old, he was given immediate medical attention by some of the best neurosurgeons in the world. He was initially thought to be perfectly fine, as he was conscious and talking after being brought to the hospital. However, he soon went into a coma, which indicated that something was terribly wrong. 

Looking at the condition of the former Ferrari and Mercedes F1 driver, the doctors decided he needed an operation. By this time, his brain has been operated twice and there has been a slight recovery, which is positive news for his fans worldwide. However, no one is really sure whether what will happen to the legendary figure, who has been in an induced coma since the day he hurt his head. 

Despite that, the doctors made one point quite clear that Schumacher could not have made it this far, had he not been wearing a helmet. Although people do not take this quality head gear seriously, yet it has numerous benefits and it certainly does work. 

So, the message is quite clear for everyone out there regardless of what field they belong to. If you are involved in any sport or work at a place where your head can be exposed to any danger, you should always wear a helmet or any other protective gear available. Nothing is more precious than your own life, so value it as much as you can. 

Even if a helmet cannot give you 100 percent protection, it can offer the most amazing thing that a person can have – hope. It is the same hope that millions of people worldwide have kept alive for Schumacher that he will be fine and smiling once again like he used to in the past. 

Author Bio:

This Guest post is written by Randy Martin. He is a bike racer and blogger who like to write on safety tips while riding Motorbikes.