Category Archives: Fall Safety

Fall Safety, General Safety Issues

SAFETY FIRST: WHEN FALL PROTECTION IS NEEDED (GUEST POST)

Sent to us by Maire Hunter:

Many workplaces—including factories, warehouses and construction sites—have work areas and conditions that expose employees to certain dangers. To minimize these risks and keep employees out of harm, safety measures must be in place. The Occupational Safety and Health Administration establishes workplace safety regulations and enforces them at various work sites.

In general, fall protection is needed whenever workers are exposed to a potential drop of more than a few feet. A variety of safety measures may be required in these situations, and workers and/or employers may also choose to take additional precautions in addition to those mandated by regulators. Read on to learn more about the various protective equipment that may be used in a work setting.

Protective Barrier

Any area where a drop to another level is present should be outfitted with a protective barrier, such as a guardrail. Depending on your local regulations and your work setting, a guardrail should at least be comprised of a toprail near waist height, as well as a midrail and toeboard to prevent slips and falls underneath the toprail. This applies to even temporary structures, such as supported scaffolding.

Harnesses and Other Supports


When working at heights, harnesses are the most common form of protection. Beam straps are common protective equipment at steel beam construction sites; the straps are anchored around overhead beams and can move along the beam as you walk up and down performing various tasks. These can also be used in combination with safety nets, which are set up around the perimeter of a structure to catch individuals and equipment that fall from a great height.

In other cases, harnesses will be worn to catch you in the event of a fall. In some cases, such as when painting and washing windows, you may be suspended from a height wearing a harness. By making sure the harness is designed for regular use in protecting falls, you can give yourself the greatest degree of safety possible.

Fall Protection Gear

Personal fall protection gear can provide a number of protections in any fall situation. Preventing a fall is always the primary goal, and there are a variety of items and tools that will help improve the safety and function of harnesses and other fall protection products. Body belts, carabiners, lanyards, rope grabs and other specialty anchors should be on hand at work sites so they can be brought in as replacements when other equipment wears down or breaks.

Insisting on Safety in the Workplace

While OSHA makes an effort to inspect various work sites to ensure regulations are being followed at all times, this doesn’t guarantee 100 percent compliance. Whether intentional or accidental, some work settings may fail to provide adequately safe working conditions. Employees may be hesitant to refuse to work in these unsafe conditions because they don’t want to ruffle feathers, but that’s a dangerous move for anyone. By demanding safe working conditions, you’re only asking that the law be followed. Don’t be afraid to speak up and request the necessary precautions.

The presence of protective gear can greatly reduce the risk of a fall or the damage resulting from such an incident. Employees should familiarize themselves with regulations so that they know what to expect and demand. There’s nothing to be gained by taking these risks, so don’t allow yourself to be put in a potentially dangerous situation.

Fall Safety, General Safety Issues, Head Protection

HOW TO STAY SAFE WHEN USING A MOBILE ELEVATED WORKING PLATFORM (GUEST POST)

When it comes to working at height, people can be forgiven in thinking that there is a bigger risk to their personal safety due to the additional circumstances, which could cause severe injury or even death such as high winds and falling debris.  Fortunately, modern technology and innovation have allowed us to create what is known in the construction industry as ‘Mobile Elevated Working Platforms’ or ‘MEWP’s’ for short. 

MEWP’s are specialised machines, which have been designed solely to reduce risk of injury and death for operators and engineers who have to work at large heights.  MEWP’s are the only proven and safest method for working at height as they allow operators to reach a task efficiently – with specific security measures in place such as restraint belts, guard rails, anti-crush devices and toe boards to prevent any kind of injury. 

Although we now know that MEWP’s help prevent operators from sustaining severe injury or death whilst they are in operation, what a lot of people fail to realise is that the key to reducing the potential for injury or death starts long before the MEWP is in operation with what’s knows as a ‘MEWP Risk Assessment’. 

A MEWP Risk Assessment in general terms is like a checklist of things to do before an MEWP is declared safe to use. 

Different countries and different construction companies have different guidelines and health & safety processes they follow, however, in this article, we will be identifying the key points to a MEWP Risk Assessment so that safety is always paramount.

Height

How high is the task which needs to be completed from the ground? It is essential that you know the exact height (or within an accurate degree of estimation) so that you can hire the ideal MEWP for the job.

Machine Type

Do you have the correct MEWP for the job? It is essential that you know what type of MEWP is suitable for the task. Will you be working on un-even ground that will require a MEWP with stabilisers or will you be working in very high winds, which will require a MEWP with additional strength in the ‘arm’.

Conditions

What are the conditions like? Again, like above, it is essential to know the conditions you will be working in. Do you require a MEWP that needs to be remotely controlled due to a tight working space or do you need a MEWP that can operate in a variety of different working conditions.

Operators

Are the people who will be using the MEWP adequately trained? Although a variety of MEWP’s do not require specific licences, it is essential that the operator(s) using the MEWP be adequately trained with sufficient experience and qualifications. Also, are the operators in good enough health to operate the machine?

Obstructions

Are there any potential obstructions to be wary of? When working on specific types of structures such as electricity pylons and bridges, there can be additional hazards such as low-hanging wires and supports which the MEWP could be caught in. In addition, are the any potential issues for the public such as roads or footpaths, which need to be cordoned off?

Restraint

Are there any additional support features that need to be acquired such as operator restraints? One of the key things for MEWP safety is the correct level of support facilities for the operator such as restraining belts, anti-entrapment devices and fall arrest systems. Also, will the operator be required to exit the MEWP at height? If so, it is recommended to assess what additional safety measures will be needed for the operator when they exit the MEWP.

Maintenance

Has the MEWP been well maintained? It is always a good idea to do some safety checks when the MEWP arrives to make sure it is well maintained and to identify any other potential safety hazards. 

So there you have it, if you need to complete a task which requires you to work at height, it is always best to utilise the services of a MEWP with a thorough MEWP Risk Assessment and although the above list covers only the very basics of a MEWP Risk Assessment, it does give a great platform from which to build a more bespoke risk assessment depending on the task at hand and any other unique hazards which could become a problem. 

Author Bio: 

Carl Smith is a copywriter for Kimberly Access Group who is one of the UK’s leading suppliers of Cherry Picker Hire and other types of MEWP hire.

Fall Safety, General Safety Issues

AVOIDING SLIPS AND FALLS (GUEST POST)

The idea of a slip and fall leading to serious injury may seem silly to some people.  Imagery of clumsy people and frivolous lawsuits immediately come to mind.  However, slips and falls can be very dangerous and lead to over 1 million emergency room visits each year.  Nearly half of all accidental deaths at home are caused by falls,  and most injuries happen at ground level rather from elevation. 

The risk carries over to the workplace as well.  In fact, slips and falls are the leading cause of worker’s compensation claims , tallying nearly 85% of all claims, primarily on slippery or slick floors.  They also represent the primary cause of work days lost, with 22% leading to over 30 days of work missed.  The combination of compensation and medical costs from slip and fall injuries is estimated at over $70 billion annually.  The most common places for slips and falls are doorways, uneven surfaces, areas prone to wetness or spills ramps, and areas of heavy traffic.   

Despite the danger, there are a number of simple steps that can be taken to make the workplace or home safer: 

– Stay off freshly mopped floors and ensure caution signs are used on wet areas.

– Clean up spills immediately

– Secure all electrical cords in any traffic areas

– Wear footwear with good support and slip resistant soles

– Maintain open walking pathways

– Ensure that all traffic areas have adequate lighting, both indoors and outdoors

– Adjust gutters to drive water away from walkways and paths

– Never stand on a surface that has wheels, such as a table or chair

– Use non skid mats

– Install handrails on both sides of all staircases 

These steps, along with countless others, can go a long way creating a safer workplace, home, and overall environment.   Martin Solomon is a Phoenix personal injury attorney and has represented hundreds of people who have been injured.  He is an advocate for safety and works to help create safer work environments for employees and the general public.

Eye Protection, Fall Safety, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Respiratory Safety

SAFE WORKING AT HEIGHT (GUEST POST)

From Jason of riskatmedia.com 

There are particular hazards associated with working at height, some of these hazards accompany almost all types of work activity, such as manual handling and slips and trips.  Others, such as falls from height and contact with moving or falling objects are of particular concern to personnel who work at height.  Falls from height are the leading cause of fatal injuries at work. While contact with moving or falling objects is the third greatest cause of workplace fatality and the second greatest cause of major accidents at work. 

Manual Handling  Manual handling related activities are a major cause of occupational injury.  Low back pain, joint injuries and repetitive strain injuries affect over a million people each year, and many of these injuries are the result of manual handling. Prior to carrying out any unavoidable manual handling activity, you should help to protect yourself from injury by following good manual handling practices.  Consider the task to be carried out and the nature of the load, and be aware of your own capabilities and the environment in which you are working. In particular, tools, equipment and materials can be extremely heavy and you should give consideration to safe manual handling practices before undertaking any job that involves lifting these items while working at height, where manual lifts may be made more difficult by space restrictions and the potential to fall. 

Slip, Trips and Falls  Slips and trips represent a significant cause of work related injury.  Slips and trips can result from contamination, obstacles, inappropriate footwear, reduced visibility, the environment and people’s attitudes. It is extremely important that elevated work platforms and access ladders are kept clear of slip and trip hazards that could result in a possible fall from height.  By removing waste materials to waste skips you can contribute significantly to good housekeeping.  You can also reduce the risk of slips and trips by properly routing any cables that you use, by only taking the tools, equipment and materials necessary to the job aloft, by appropriately storing all such items and keeping walkways clear, by ensuring that you always wear appropriate footwear, and by taking responsibility for your own and your colleagues safety and containing any spills that you might discover. Scaffolders should ensure that no loose scaffolding materials are ever left on a finished scaffold. 

Contact with Moving or Falling Objects  Contact with moving or falling objects is a significant hazard to personnel involved in work at height, as well as to personnel who may be working in the areas beneath operations conducted at height.   Access to the area in which you are working from a ladder should be restricted by barriers when moving vehicles, trailers and hand bogies pose a collision risk.  Suitable barriers and signs should be used to keep the access roads used by Mobile Elevated Work Platforms clear. This will reduce the risk of collision with structures, people and other mobile plant and vehicles.  Care should still be taken to ensure that the platform’s boom or knuckles do not impede the access and working areas used by other plant and vehicles. 

Safe working practices should always be followed to prevent the fall of materials from a height.  All tools, equipment and materials essential to work aloft should be appropriately stowed to ensure that they do not fall.  Any excess materials and all debris should be removed from elevated work platforms, all loose items should be placed in storage boxes, bagged or secured where possible, edge protection should be used to prevent items falling from sloping roofs and all items you need to carry while using a ladder should be held in a belt pouch.  Where there is still a possibility that materials may fall from a height, access to the work area should be restricted by barriers and appropriate warning signs or by posting a banks-man. 

Elevated Working Platforms  Where work at height cannot be avoided, safe working practices should always be followed to reduce the risk of falling any distance which could cause injury.  You should always use an approved and safe means of gaining access to elevated working platforms.  Wherever possible, work at height should be carried out from an appropriate working platform with edge protection, making use of a safety harness and any other available work equipment and fall arrest systems to prevent falls from height.  Where this is not possible, work of a light nature and short duration can be undertaken from a ladder, while other work can be undertaken by suitably trained, experienced and medically fit individuals using a body harness and other fall arrest equipment identified during detailed planning.  You should never use temporary makeshift working platforms.

Work platforms on scaffolding should have full guardrails and toe boards.  A safety harness is required if full guarding is not possible, or if the work involves reaching over. Mesh should be installed if scaffolding is designed specifically to store bulk materials. 

Appropriate fall arrest equipment attached to a suitable anchor point inside the platform should be used whenever you work from a mobile elevated work platform. 

Edges of roofs from which a person could fall should be provided with a barrier that is properly constructed, anchored and fitted with toe boards as appropriate.  Roof openings should be protected by barriers or covers.  Fragile roof areas should be identified and protected by a barrier, or fitted with crawling boards, crawling ladders or duck boards that are properly supported.

Where ladders must be used, they should be securely lashed at the top, tied at the bottom, or held by a second person to ensure that they do not move or slip.  Ladders should be long enough to allow 3 or 4 rungs above the working step, 3 points of contact should be maintained at all times and a harness clipped to a secure anchor point should always be used. 

Structural Integrity  Elevated working platforms should be structurally sound to prevent accidents which could lead to falls from height.  All scaffolding should be erected by trained and competent personnel, they should verify that all materials are fit for purpose and that the load bearing ground and surfaces are fit for purpose.  Never be tempted to make unauthorised alterations to scaffolding. Prior to using any scaffolding on site, you must check that the scaff tag is in date and valid.  Scaffolding should be inspected weekly and following adverse weather conditions by a competent person.  If you are at all unsure that the appropriate inspections have been carried out, do not use the scaffolding and report to your manager. 

All ladders should also conform to the relevant Standard, be free from patent defect, and be inspected once a week by a competent person.  If you have any reason to doubt that a ladder has been appropriately inspected, do not use it and report to your manager.

Lanyards should be inspected before each use and should be subjected to a detailed inspection by a competent person at least once every six months.  If you have reason to think that any fall arrest equipment has not been properly inspected, please do not use it and discuss the matter with your manager. 

Planning  To reduce the risk of personnel falling all work at height should be suitably planned. Where the use of a body harness cannot be avoided for work at height, a competent manager should provide a plan which incorporates safe access and egress, as well as the type of harness and double lanyard that should be used. 

A suitable rescue plan should also be in place where a harness or restraints are used.  The rescue plan should ensure that effective communication links have been established so that assistance can be summoned. 

Training  All personnel need appropriate training and experience to safely carry out operations which involve working at height.  Only suitably trained and authorised personnel are allowed to use mobile elevated work platforms and body harnesses.  Cradles should only be used by personnel who are suitably trained and experienced. 

Human Factors  Human factors play a significant role in safe working at height.  For this reason, personnel should not work at height if you are tired or otherwise unable to give your full attention to the task at hand.  If you feel that your medical history, age, health or fitness might affect your ability to carry work at height, please discuss this with your manager.  Remember that you should never come to work in possession of, or under the influence of, alcohol or drugs.  These substances expose everyone on site to risks that are unnecessary and easily avoided. 

Environments  The risks associated with work at height can be increased by the environment in which you are required to work, Hot and cold environments can result in physical stresses and affect concentration, as they have the potential to raise or lower you body core temperature beyond safe limits.  Confined spaces limit your ability to move around, can be poorly lit and may increase the length of time taken to provide medical assistance in the event of an emergency. It is therefore extremely important that you follow safe working practices when working at height in these environments. 

Hot Works  Particular attention should be given to establishing a safe place of work and to following safe working practices when you carry out hazardous tasks, such as hot works, at height.  The risks associated with fumes, explosions and electric shock can result in falls from height.  Ensure that you use appropriate Personal Protective Equipment, or PPE, that you use and store gas bottles safely and that all items of electrical equipment carry a valid appliance testing label. 

Personal Protective Equipment PPE  PPE is an important means of reducing the risks associated with work at height.  At least standard PPE with safety glasses, construction hard hats and gloves should be worn, with a harness attached to suitable fall arrest equipment while accessing or working on elevated platforms.  Additional PPE, such as dust masks, breathing apparatus and hearing protection may be required for particular tasks, as outlined in the relevant risk assessment.

You should also wear close fitting garments, not wear a tie or jewellery and tie back long hair and long beards to reduce the risk of entanglement.  Only PPE in good working condition will reduce the hazards associated with your work, so it is important to remove, clean and store your PPE correctly. 

Electricity and Overhead Power Lines  Electric shock can result in death and severe burns.  In addition, serious injury can occur if an individual falls from height as a result of an electric shock. All items of electrical equipment should carry a valid test certificate or label to reduce the risk of electric shock.  Testing should be carried out by suitably trained individuals.   If any item of electrical equipment does not carry a valid test label, it should not be used and you should inform your manager.  You should also carry out a visual pre-use inspection of all equipment to ensure that it remains undamaged. 

Because of the risk of electrocution, aluminium ladders should never be used where there is a risk of contact with electricity.

Electric shock can also occur as a result of contact with overhead power lines.  Where mobile elevated work platforms are to be used near overhead power lines, an appointed person should plan and supervise operations.  Power lines should be made dead where at all possible.  Where this is not possible, work under power lines should be of short duration and all appropriate restraints and barriers should be in place to ensure that the platform cannot reach or accidentally come into contact with live power lines. 

Mobile Elevated Work Platforms MEWPs   Other safe working practices are necessary to prevent mobile elevated work platforms from overturning during work at height.  The manufacturer’s safe working load should never be exceeded and the platform should never be operated in high winds.  You should also avoid handling sheet type materials in windy conditions.

Where the use of a platform on uneven ground cannot be avoided, they should be used at reduced speed, they should not be turned on slopes and the use of road plates should be considered. 

Emergency Procedures  In the event of an emergency while working at height, isolate any equipment that you have been using, make your work area safe and use a safe means of egress to evacuate the area according to the site emergency procedures.  If you are involved in an accident, seek immediate assistance. 

Riskatmedia – Safety Training Videos

Back Safety, Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety, Protective Clothing, Respiratory Safety

KEEPING THE CONSTRUCTION INDUSTRY SAFE (GUEST POST)

1 Comment

Construction is a notoriously dangerous industry.  In the UK, where we are based, the industry employs around five percent of the country’s workforce.  According to government statistics thosefive percent have twenty-two percent of the work related fatal injuries and ten percent of the reported major injuries.  In the US, seventeen percent of worker fatalities are in the construction industry. 

As shocking as these statistics sound, there’s been a significant improvement in both countries over the last forty years.  I think the reasons for this are threefold.  Firstly, there is much more safety legislation nowadays than formerly.  Secondly there’s a much more consistent use of safety clothing and equipment – much of which you can study at leisure on this site.  Thirdly, more workers receive various forms of safety training.  I firmly believe that the way to continue to improve safety in construction is to make training and refresher courses widely available for people employed in the industry and I also think that it’s in the construction companies’ best interest to ensure that their employees can access training.  Why do I believe this?  Well, there are several reasons: 

1)      Companies can be financially liable for the safety of their employees.  Even with insurance your premiums will go up dramatically if you have accidents on your sites.

2)      Companies generally want to employ the best workers.  If you have a good reputation for safety practice, people are more likely to want to join you and stay with you.  If your employees see that you’re willing to develop their skills, they’re much more likely to stay loyal to you.

3)      Workers are often injured by the actions of other workers.  Think about it – how likely is it that you’ll be fatally injured by a falling object that you’ve dropped? How likely is it that you’ll have put up the scaffolding that’s worked loose and caused you to fall?  The more workers on your site who have safety training, the safer the whole site will be.

4)      Companies can receive site inspections from official bodies.  Some are empowered to fine companies for non-compliance with legislation.  The more knowledgeable your employees are, the less likely you are to have compliance breaches on your sites.

5)      Companies are in a position to request bespoke training from education co-ordinators if they’re putting through a large number of pupils.  This means that the trainer(s) will put your company’s policies and procedures at the heart of their training.  You are also in a position to monitor the way that the training is delivered and make sure that your employees have the skills rather than just the piece of paper at the end of it. 

Are you involved with the construction industry?  Do you have any views on the safety training  you’ve received?  We’d be interested to read your responses in the comments section.

 Sent to us by Carl, of blogginghelper.co.uk
Email: carl@blogginghelper.co.uk
Twitter: @blogginghelper
Web: www.blogginghelper.co.uk

Fall Safety, First Aid Safety, General Safety Issues

SAFE ACCESS AND EGRESS (GUEST POST)

Another great article send to us by Jason of  riskatmedia 

Access and egress refer to the rate or means of entry and exit to a workplace or work area.  Routes that provide access and egress should be controlled, safe, suitably constructed, kept free of obstructions and well maintained.  Serious injury can result from hazards such as fires, slips and trips, contact with moving vehicles, unauthorised entry into hazardous work areas, falls into floor openings and falls into water, when access and egress arrangements are not properly maintained.

We will cover each of these hazards in turn during the course of this presentation, and will demonstrate the importance of maintaining safe access and egress arrangements. 

Site Access

It is extremely important to always know who is on site at any given time, and aware of personnel present in a particular work area.  In the event of an emergency, such as a fire, it will then be possible to determine whether anyone has been unable to evacuate the site.  It will also be possible to direct rescue services to the appropriate work area.  You should, therefore, always follow the appropriate access control procedures every time you enter or exit a site or a controlled work area. 

Egress Routes

Egress routes need to be clearly marked out, well lit, unobstructed and well maintained if they are to allow personnel and others on site to exit quickly in the event of an emergency.  For these reasons, you should never lay down or store tools, equipment, work pieces or other items on routes of egress.  Operations should be planned so that they do not damage egress routes, and any accidental damage should be rectified immediately.

Contain and report any spills that are likely to affect egress routes.  Holes should be repaired, covered, or guarded and reported.  And you should consider whether any waste water runoff produced as a result of your operations is likely to affect egress routes.  Most importantly, make sure that you are familiar with the egress route from your work area and from the site, so that you can quickly and safely exit the work place in the event of an emergency. 

Slips, Trips and Falls

Egress routes are often also access routes, and part of your work area. But even when they are not, access routes and work areas should be kept in a safe, unobstructed and well maintained condition, as this can help to reduce the risk of dangerous slip and trip accidents.

Slips and trips represent a significant cause of work related injury.  Slips and trips can result from contamination, obstacles, inappropriate footwear, reduced visibility, the environment and people’s attitudes.  Good workmanship and good housekeeping are practices that can help to prevent accidents and fires.  By removing debris, slag, packaging and other waste materials to waste skips, you can contribute significantly to good housekeeping.  You can also reduce the risk of slips and trips by properly routing any cables or air hoses that you use, by placing fixed covers over small holes in flooring, by ensuring that you always wear appropriate footwear, by holding the handrails when you use stairs or access ladders, by considering whether the environment in which you will be working increases the risk of slips and trips and by taking responsibility for your own and your colleagues safety and appropriately containing any spills that you might discover.

Mobile Plant

Each year, a number of people die as a result of being struck by a moving or falling object.  In most cases, these deaths involved accidents relating to vehicles in the work place.  It is important to separate vehicles and pedestrians in your work area, and to remember that only suitably trained, certified and authorised people should operate mobile plant, that you should always be aware of vehicle movements within your workplace and that you stick to pedestrian routes when going to or leaving your work area. 

Arrangement of your Work Area

Your work area should be organised to ensure that you have enough height and space for access and egress, as well as to move around and carry out operations safely.  Low level ceilings or pipe-work should be highlighted.  Particular safe working procedures are required in work areas with limited access and egress, including confined spaces. 

Hazardous Work Areas

Access restrictions, such as barriers, are required for hazardous work areas.  Machine shops, elevated work platforms, confined spaces, roofs, floor openings and work areas over or near water pose significant hazards and it should not be possible for unauthorised personnel to enter these areas.  Please stick to designated pedestrian walkways if you need to walk past or through these work areas and do not be tempted to cross barriers or take unnecessary short cuts.  If you need to work in a hazardous area, you must follow the specific access procedures for your work area.  This may include access control and equipment control.  You may not be able to take personal items into certain work areas, such as confined spaces.  You will also need to be familiar with the rescue plan established for some work areas, including confined spaces and work areas near water.  If you operate powered access equipment, you must be suitably trained and authorised. 

Floor Openings

All floor openings should be guarded by scaffold barriers and toe boards, and appropriate warning signs should be displayed to prevent falls.  Personnel working within the barrier must wear a safety harness attached to secure anchor points.  When operations are suspended for significant periods, additional precautions should be considered, including fixed covers.  Covers should be made of a suitable, load bearing material. 

Working Over or Near Water

Safe access and egress routes to and from work areas near or over water should be established.  Buoyancy aids should be available and a first aid box should be provided at the operational site.  Work over water requires specialist scaffolding which should be erected by fully trained personnel.  You should never interfere with safeguards or make unauthorised alterations to this scaffolding.  All personnel who work near water should be trained in resuscitation techniques and they should never work alone.  An in situ risk assessment should be conducted to determine whether additional controls are necessary to prevent falls into the water, which may result in drowning, the ingestion of pollutants, exposure to water borne diseases and resultant illness.  Additional controls may include full netting of the scaffold, harnesses and safety lines, life jackets and a rescue boat.  If a rescue boat is required, two experienced personnel should serve as crew.  Consideration should be given to whether the water is tidal, deep or on an estuary, whether strong currents prevail and whether there are straight sided banks, in determining how rescue will be affected. Particular hazards and risks to the boat crew will also need to be assessed, and a shore based supervisor may need to be provided.  Radio and mobile communications should be established.

 

Guest Post Riskatmedia – Safety Training Videos

Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety, Protective Clothing, Respiratory Safety

WHAT SHOULD I INCLUDE IN MY CONSTRUCTION SITE SAFETY INDUCTION? (GUEST POST)

2 Comments

Sent by Jason of riskatmedia 

Every week at least one construction worker will die as a result of work-related injuries.  Most of these fatalities involve skilled construction and building workers. Falling from a height is the greatest single cause of fatal injury, followed by being struck by a moving or falling object, contact with electricity, being trapped by something collapsing or overturning and being struck by a moving vehicle. In addition to this, over 3500 construction workers suffer major work-related injuries every year.

There are many dangers involved in working on any construction site.  These hazards are real and often potentially life threatening, but we face them every day and sometimes forget how real and close they may be to all of us. This blog will cover most of the topics required for a Construction Site Induction.

Site Access

Access onto site should always be controlled for safety and security reasons.  This may be by means of a signing in and out procedure, or by means of controlled entry technology.  It is important that you use controlled entry procedures every time you enter or exit the site, this will allow management/security to determine exactly who is on site should an emergency situation arise. 

Personal Protective Equipment – PPE

Personal protective equipment, or PPE, is an important means of reducing the hazards associated with work on a construction site.  The minimum PPE that should be worn on site is a hard hat, appropriate gloves, safety footwear and a high visibility vest or jacket.  This PPE should be worn on site at all times and may be supplemented by additional PPE, such as eye protection, ear defenders, dust masks and a safety harness, as stipulated in your risk assessment and method statement or permit to work.  All items of PPE need to provide a good fit and be in good working condition, so it is important to check your PPE before you use it.  PPE should be stored in a secure, clean and dry environment and any contaminated PPE should be removed carefully, cleaned or disposed of in a safe manner.” 

Alcohol, Drugs and Medical Conditions

It is extremely important that you never come to work in possession of, or impaired by alcohol or drugs. These substances expose everyone on site to risks that are unnecessary and easily avoided. If you have a medical condition, have an active implantable medical device fitted or use prescribed or other medicines, you should report this to your manager/supervisor so that the details can be recorded for use in the event of an emergency.  Any information that you provide should be treated in the strictest confidence. 

Traffic Management and Pedestrian Walkways

Construction sites are busy and noisy environments with mobile plant and vehicles often in close proximity to pedestrians.  For these reasons, designated pedestrian walkways and Egress Routes should been marked out on the site. Stick to these walkways whilst on site and don’t be tempted to take short cuts that might expose you to unnecessary risk.  If you drive on to site, make sure that you stick to the speed limit, that you only park in designated parking bays and that you keep footpaths, access routes and pedestrian walkways clear.  A copy of the most up to date traffic management plan may be displayed on site notice boards, along with other important safety information. 

Welfare Facilities

Welfare facilities should be available on site and may include toilets, a restroom, a washroom and drying room and may include a canteen.  Use these facilities responsibly by helping to keep them clean and tidy and recycling your waste as appropriate. 

Vermin

Vermin are encouraged by the presence of food on site, so it is very important that you only eat in designated areas, that you dispose of food waste appropriately and that you do not take any food on to site.  Vermin, such as rats, can spread diseases, including the serious and possibly fatal disease Leptospirosis. 

Smoking, Music and Mobile Phones

Smoking and music are generally not permitted on construction sites, except in areas designated by site management.  Mobile phones should only be used in lower risk areas, such as offices and welfare facilities, where you are safe and unlikely to affect other workers or operations.  Mobile plant operators and drivers of site vehicles must never use a mobile phone whilst operating or driving. 

Hazardous Substances and Materials

During your work you may use or come into contact with substances such as adhesives, paints or dust, which may harm you or the environment.  If you use these hazardous substances you are required to understand the precautions that must be observed and the PPE that must be used, when transferring, mixing or using these substances.  You are also required to understand the relevant storage, disposal and emergency arrangements.  Information on the substance as well as an assessment of the hazards associated with its use should also be made available.

Any spills of fuels, oils or potentially hazardous substances, should be immediately contained using the appropriate spill kit and then reported to the supervisor or manager so the spill can be safely cleaned up. 

Shots relevant to environmental management

To help reduce the effect of operations on the environment:

  • Reuse and recycle as many materials as possible
  • Compress waste and use waste segregation facilities where possible
  • Dispose of waste responsibly and in accordance with legislation
  • Damp down to minimise dust
  • Turn off any plant or equipment not in use
  • Ensure plant and equipment are well maintained
  • Only use task lighting where necessary
  • Turn off any taps and hoses when not in use and report any leaks 
  • Never pump or pour anything down the drains and only wash down plant and equipment such as cement mixers in the areas provided
  • Where there are trees that need to be protected, please remain within designated work areas and avoid damaging tree routes
  • Do not disturb nesting birds, newts, badgers, bats or invasive weeds
  • Be aware of any habitats or historical remains on site. 

Emergency Fire Procedures

Specific emergency procedures should be followed in the event of a fire.  If a fire occurs, an alarm will sound.  If you hear a fire alarm, stop what you are doing.  Isolate any plant or equipment that you have been using and make your work area safe.  Take the nearest escape route and follow a safe route to the nearest assembly point.  Remain at your assembly point until you are given the all clear to return to work.  Take the time to familiarise yourself with the specific emergency procedures that apply to the site, as well as the location of the assembly points. 

Flammable Materials

To help prevent fires, flammable and combustible material should always be stored safely.  Gas bottles should be stored in secure, vented cages or stores with appropriate warning notices.  When working with gas, always ensure that you do so with adequate ventilation well away from any naked flames. 

Accident Procedures

Construction site rules and procedures are designed to minimise the risks to the safety of everyone who works on site.  But accidents may still happen.   In the event of an accident, first aid facilities should be available on site.  The names of all trained first aiders may be displayed on the site information board.  If you are involved in an accident or a near miss, no matter how minor, please report it to the site management so that they can ensure you get the correct medical treatment and take steps to prevent the incident from recurring.  If you witness a serious accident, get help and send someone for the site manager.  Try not to move the injured person, but do make sure that they are safe. 

Slips, Trips and Falls

Good workmanship and good housekeeping are practices that can help to prevent accidents and fires.  Remember to route power and lighting cables so that they do not pose a potential trip hazard.  Tools, materials and equipment should only be stored where indicated and should be stacked safely.  All access routes and walkways should be kept clear of obstructions, especially those that are used by members of the public including children.  Tidy and clean your work space throughout the day and never leave tools, equipment or materials where they could create a trip hazard. 

Electrical Safety

All items of electrical plant used on site should carry a valid testing certificate or label to ensure Electrical Safety.  If an item of plant does not carry a valid electrical testing label, is damaged or has a missing guard, then please, do not use it.  If you use battery powered tools ensure that batteries are charged in a safe area and do not obstruct welfare facilities or create trip hazards. 

Tower and Mobile Cranes

Tower and mobile cranes may be in use on site, so it is important that you do not enter unloading areas unless you are authorised to do so.  You should also be aware of the fact that plant including cranes, telehandlers and powered access equipment should only be operated by individuals who are suitably trained and authorised to do so.  If you are trained and authorised to operate plant, make sure that you carry out daily pre-use safety checks, that all safety devices and locking pins are in place, that the flashing beacon and any warning devices are working and that all-round visibility aids are in place and effective.  Seek the assistance of a banks-man where visibility is limited and never leave the keys in an unattended machine. 

Work Equipment

Whatever work activity you are carrying out on site you will be using work equipment. Only use the correct tools for the job and only use tools and other work equipment which you have been trained to use. 

Risk Assessment, Method Statement, and Permit to Work

Before you undertake any job, make sure that your supervisor has briefed you, that you have a complete and valid risk assessment and that you are able to and do work according to your method statement.  Be aware that new risk assessments and method statements may be required where jobs have changed or where new hazards have been introduced.  In addition, certain work on site may require a permit or permission to work. These are issued after you have submitted a risk assessment and method statement for a particular job.  If you are unsure whether a particular job requires a permit, ask your supervisor or manager. 

Working at Height

You may remember that falls from height represent the single largest cause of death in the construction industry so Safe Working at Height is essential. It is therefore extremely important that you follow safe working practices when work at height cannot be avoided.  Always use an appropriate working platform or work equipment whenever there is a potential to fall, which includes loading and unloading of vehicles.    Always check your work platform before use, and be especially vigilant in windy, wet or icy weather.  Remember, the use of a harness requires extra competence and is a last resort.  If you operate powered access equipment you must have the appropriate training, certification and authorisation for that particular type of equipment.  You should also carry out and record a daily pre-use inspection.  Ensure that the access equipment is only used on stable ground, that it is not used in high winds, and never use it to lift or transport loads. In a boom type mobile elevated work platform you must wear a full body restraint harness secured to an anchor point by a suitable length, work restraint lanyard. Remember to park the mobile access equipment safely and to remove the key when the machine is not in use.  The use of ladders and stepladders is discouraged and may be permitted only where the task is simple, of short duration, and no safer alternative is possible.  Scaffolding, access ladders and mobile towers may only be erected, dismantled or modified by trained and competent persons.  Remember to lock the wheels and fit the guard rails and to check that the scaff tag is in date and valid. Close all loading bay gates after use and never load materials onto guard rails. 

Excavations and Quick Hitches

Safe working practices are essential when excavating.  Check and mark the location of services, protect services with barriers or road plates, dig trial holes to confirm location and depth and avoid the use of mechanical equipment, picks and forks around pipes and cables.  Don’t enter an excavation unless you have to.  If you do enter an excavation, make sure that the sides are battered, stepped or supported, use a ladder to gain access and put barriers around the edges if there is a potential to fall.

Buckets can become detached from excavators during operations if the appropriate locking pin or device is not properly fitted.  The excavator operator must ensure that the locking pin or device is correctly engaged and secure before commencing operations. 

Manual Handling

Workers in the construction industry suffer considerably higher rates of manual handling related injuries than workers in any other industry.  Help to protect yourself from injury by following good principles of manual handling.  If you must lift a load, assess whether you can lift it alone or whether you need someone to help you.  Remember to consider the environment in which you are working.  Always adopt the correct lifting technique. 

Your Health

Your health is as important as your safety.  Vibration white finger and dermatitis are too often suffered by construction workers.  Protect against these painful conditions by reducing your daily exposure to vibration, wearing the correct PPE and using barrier creams to protect yourself from contact with potential skin irritants such as cement.  Remember to apply sun cream if you are going to be working in direct sunlight. Wear an appropriate dust mask and use vacuums rather than sweeping to clear dust.  Check your tetanus vaccinations are up to date. Never touch discarded needles or syringes.  Stop work and clear any area if you discover a substance you think might be asbestos.  If you discover asbestos or discarded needles, please report this to site management. 

Riskatmedia – Safety Videos

Ergonomics, Eye Protection, Fall Safety, First Aid Safety, Hand Protection, Hearing Protection

POWER TOOL SAFETY (GUEST POST)

1 Comment

By Jason, from RiskAtMedia: 

All work activities carry the potential to cause harm to our own and others’ health and well-being, but we sometimes forget how real and close to us these hazards are.  Every year, a large number of people are killed at work, and an even greater number of people suffer work related injuries because they are unable to follow safe working practices. There are particular hazards associated with the use of powered tools, some of these hazards accompany almost all types of work activity, such as manual handling and slips and trips.  Others are of particular concern to powered tool operators and we will consider these in this Power Tool Safety brief. 

Manual Handling

Manual handling related activities are a major cause of occupational injury.  Low back pain, joint injuries and repetitive strain injuries of various sorts, affect over a million people each year, and many of these injuries are the result of manual handling. Prior to carrying out any unavoidable manual handling activity you should help to protect yourself from injury by following good manual handling practices.  Consider the task to be carried out and the nature of the load, and be aware of your own capabilities and the environment in which you are working. In particular, tools and work pieces can be extremely heavy and you should give consideration to safe manual handling practices before undertaking any job that involves lifting these items. 

Slips, Trips and Falls

Slips, trips and falls represent a significant cause of work related injury.  Slips and trips can result from contamination, obstacles, inappropriate footwear, reduced visibility, the environment and people’s attitudes.  Good workmanship and good housekeeping are practices that can help to prevent accidents and fires.  By removing debris, swarf, packaging and other waste materials to waste skips you can contribute significantly to good housekeeping.  You can also reduce the risk of slips and trips by properly routing any cables or air hoses that you use, by appropriately storing materials, tools and other equipment and keeping walkways clear, by ensuring that you always wear appropriate shoes and by taking responsibility for your own and your colleagues safety and appropriately containing any spills that you might discover. 

Contact Risk

Contact with moving or rotating power tools is a significant hazard to personnel using power tools, as well as to personnel working close by, and can result in serious injury.  All personnel need appropriate training and experience to be able to use work equipment safely.  Never use any work equipment unless you have received suitable training and are qualified and competent to do so.  Before you begin to use a powered tool, make sure that you have read the manufacturer’s instructions for use.  Study the tool to make sure that you know which parts of the tool move, which parts are stationary and which parts are sharp.  Make sure that all guards are in place.  Where appropriate, remember to securely clamp tools or work pieces.  And ensure that you only use tools for the job they were intended to perform, as this can significantly reduce the risk of injury.  To protect others from the risk of contact with the moving or rotating powered tool parts, make sure any necessary warning signs and barriers are in place before you begin work.  You should also take care if you need to walk through or work in an area adjacent to where another person is using powered tools. 

Electrical Safety

Electric shock from powered tools can result in death or severe burns.  Additionally, serious injury can result if the operator falls against a powered tool as a result of the shock.  To prevent the risks posed by electrical hazards, all electric powered tools should carry a valid test certificate or label.  Testing should be carried out by suitably trained individuals.   If an electric powered tool does not carry a valid test label, it should not be used and you should inform your supervisor. 

Malfunction

You should also carry out a visual pre-use inspection of all tools to ensure that they remain undamaged.  If you do discover a defect, please do not use the tool and report the problem to your supervisor.  Never attempt to make temporary repairs to a tool.   You should also observe the tool while it is in use for possible signs of malfunction.  If you notice that the tool is vibrating abnormally, doesn’t sound right, or is displaying signs of any other problem, switch it off and report to your supervisor.  When using an impact wrench, only sockets specifically designed for use with impact wrenches should be used and you should carry out a daily pre-use inspection of the socket to ensure that it is undamaged.  Never use sockets designed for hand ratchets on an impact wrench. 

Maintenance

Ensuring that equipment is appropriately cleaned and maintained is also central to safety.  Clean tools after each use, as a dirty tool is unsafe and is difficult to use.  When you carry out maintenance, make sure that the equipment is isolated and cannot be turned on accidentally.  Ensure swarf has cooled before using gloves and a brush to remove it and clean the tool.  If you need to remove swarf from a running powered tool to prevent long strands developing, make sure that you are not wearing gloves and use a rod to remove the swarf.  Never use a rag to clean a tool while it is running and never use compressed air to clean a tool. 

Entanglement

When using powered tools, wear close fitting garments, do not wear a tie or jewellery and tie back long hair and long beards to reduce the risk of entanglement. 

Personal Protective Equipment PPE

Personal Protective Equipment, or PPE, is an important means of reducing the risks associated with projectile particles produced when using powered tools.  At least standard PPE with safety glasses should be worn.  It may be necessary to screen the work area if projectile particles pose a hazard to individuals working or passing nearby.  Only PPE in good working condition will reduce the hazards associated with your work, so it is important to remove, clean and store your PPE correctly. 

Noise at Work

Hearing loss caused by exposure to noise at work is a significant source of occupational disease, with many people suffering deafness, tinnitus or other ear conditions as a result of exposure to excessive noise levels at work.  The level of noise and how long people are exposed to noise at work both contribute to potential hearing damage.  Noise can be reduced to harmless levels by wearing industiral ear plugs and ear defenders. These items of PPE should therefore always be worn while using impact wrenches, and should also be worn when using other powered tools unless local measurements indicate that noise levels are below the level at which such action is necessary. Controls should also be considered for individuals working in close proximity. 

Human Factors

Human factors also play a role in increasing the risk of injury while using powered tools.  Never come to work in possession of, or under the influence of, alcohol or drugs.  These substances expose everyone to risks that are unnecessary and easily avoided.  You should also not use powered tools if you are overly tired or unwell, as concentration is important to using tools safely. 

Hand Arm Vibration Syndrome HAVS

If you regularly use powered tools, you may be at risk of developing Hand Arm Vibration Syndrome or HAVS.  This condition involves damage to the blood vessels, nerves and joints of the hand, wrist and arm.  It is a painful and debilitating condition, resulting in numbness of the hands to the extent where it is impossible to feel with your fingers and very difficult for you to pick up small objects.  This can make both occupational and leisure activities, such as playing darts, fishing or DIY, impossible.  HAVS is entirely preventable.  Always use the right tool for the job, as this will allow you to complete the job more quickly and will expose you to less hand-arm vibration.  Carry out a pre-use inspection of all hand held equipment and report any damage to your supervisor, as faults and general wear may result in increased vibration.  If you do experience abnormal vibration from hand held equipment, please report this immediately.  Try to reduce the amount of vibration you are exposed to in one go by doing other jobs in between.  Use a relaxed grip and avoid using excessive force on a tool or work piece.  Store tools so that they do not have very cold handles when used next.  Keep your hands warm and dry and take breaks to exercise your fingers regularly.   Wear gloves when using impact wrenches to reduce the effect of vibration. 

Compressed Air

Compressed air is a safe and reliable alternative to electricity for powering impact wrenches and other air powered tools, but it can be dangerous if it is not used responsibly.  In particular, contact with streams of compressed air can penetrate the skin and enter the bloodstream.  All compressed air plant should be appropriately inspected and certified to ensure that it is safe to use.  Never operate air compressors at faster speeds than the manufacturer’s recommendation and ensure that the air intake is from a clean, outside and fresh air source, with screens and filters used to clean the air if necessary.  Unless your tool has a quick disconnect plug, you should always turn off the air supply at the control valve and bleed the tool before disconnecting.  You should never compress, bend or kink air hoses and you should never carry an impact wrench or other tool by the air hose.  And never use compressed air to clean your clothes or yourself. 

Emergency Procedures

In the event of an emergency, isolate any equipment that you have been using and evacuate the area according to the site emergency procedures.  If you are involved in an accident, seek immediate assistance. 

Riskatmedia – Safety Videos

Eye Protection, Fall Safety, General Safety Issues

IMPORTANCE OF PROPER LIGHTING AT WORK AND HOME (GUEST POST)

By Ross Donald

Poor lighting is one of the most commonly identified causes of workplace injuries. It is not surprising when you consider that proper lighting is a key factor of being able to identify and avoid hazards, safely handle dangerous equipment, and deter criminal activity. Though additional lighting means additional costs, the costs of personal injury are often far greater. It is vital to give ample consideration to the lighting conditions of businesses and homes not only with cost in mind, but also the well-being of occupants and visitors.

Light Measurement

In meeting safety standards, light is usually measured in foot-candles. This refers to the amount of light cast on one square foot of a surface from a candle one foot away. There are many meters one can buy for professional use in measuring light, but personal intuition cannot be overvalued in determining unsafe lighting conditions.

Outside

Outdoor lighting needs just as much consideration as indoor lighting. Slip and fall accidents often occur outside when poor lighting makes it difficult to spot ice, oil, or dips and rises on walkways and parking lots. Also, a high level of visibility around the exterior of a building enhances its security by deterring criminals who would be easily seen conducting suspicious activity. In terms of safety and security, brighter lighting covering the largest area possible is usually advisable. This will also ensure that security cameras capture what they need to when incidents do occur.

Though business and home owners often give a good deal of consideration to aesthetic in their outdoor lighting, it is important to balance safety into that equation. Parking lot lighting is not federally regulated, but you will often find local legislation that requires something like, “a minimum of .25 foot-candles on the parking surface.” Such a minimum requirement is not necessarily suitable for all cases, however.

Stairs

Stairways indoors and outdoors need to be well lit as they are a hot spot for falls and tend to result in more severe injuries. Though there are a variety of options for lighting stairs, it is a good idea to place the lights so that there is as little shadow on the stairs as possible. Legislation often requires something around one foot-candle at the center of each stair and landing, so it is important to evaluate the light on this area of stairways.

Dangerous Equipment

Perhaps the most important consideration for proper lighting, dangerous equipment has to be evaluated on a case by case basis depending on how it is used. This includes everything from handling knives in a kitchen to operating a fork lift in a warehouse. Equipment involving careful manual operation needs a good light source that allows the operator to clearly see what they are doing. Also, if the operator is casting their own shadow over the equipment, the light source may need better placement. For equipment where there is a danger of injury by falling into its area of operation, ample light should be provided for a zone around the equipment as well.

Emergency Lighting

Emergency situations such as power outages and fires require not only good back up light sources, but also well-lit egress routes in case evacuation is necessary. Though this is an obvious and regulated consideration for businesses, it is important not to allow maintenance of such provisions to fall by the wayside. After all, just because they are not used every day doesn’t mean you should ignore them and expect them to perform whenever you may need them.

The Mood Factor

Though we wouldn’t generally consider a dreary state of mind to be an injury, it is a light-related factor that affects us all on some level at work and at home. Studies have shown that low light conditions contribute to a dark mood. At the same time, too much light also causes a decline here, so the trick is to find the right level of light that both enhances mood and provides safety where necessary.

As lighting technology evolves, more and more efficient, low-cost options are becoming available. While cost and aesthetics are valid considerations, safety is always paramount and should not be sacrificed in favor of other factors. Even with proper lighting installed, regular maintenance and replacement of the lights themselves and removal of obstructions is advisable for businesses and homeowners alike. When health and well-being are at stake, no cost in money or effort should be too great. Whether at home or at work, we should always be on the lookout for unsafe lighting conditions so they can be addressed before harm is done.

Ross Donald is a safety-conscious stay at home dad and blogger who loves to undertake a variety of DIY projects. He writes for leading supplier of light fixtures, Lightingsale.com

Back Safety, Ergonomics, Fall Safety, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection

SAFE LIFTING OPERATIONS (GUEST POST)

Sent by Jason of Riskatmedia.com

All work activities carry the potential to cause harm to our own and others’ health and well-being, but we sometimes forget how real and close to us these hazards are.  Every year, a large number of people are killed at work, and an even greater number of people suffer work related injuries because they are unable to follow safe working practices. There are particular hazards associated with lifting operations, some of these hazards accompany almost all types of work activity, such as manual handling and slips and trips.  Others, such as contact with moving or falling objects and contact with moving machinery, are of particular concern to personnel involved in lifting operations as they result in a significant number of fatal and serious injuries each year.  In fact, contact with moving or falling objects is the third greatest cause of workplace fatality and the second greatest cause of major accidents at work. 

Manual Handling

Manual handling related activities are a major cause of occupational injury.  Low back pain, joint injuries and repetitive strain injuries of various sorts, affect over a million people each year, and many of these injuries are the result of manual handling. Prior to carrying out any unavoidable manual handling activity you should help to protect yourself from injury by following good manual handling practices.  Consider the task to be carried out and the nature of the load, and be aware of your own capabilities and the environment in which you are working. In particular, lifting accessories, lifted equipment and loads can be extremely heavy and you should give consideration to safe manual handling practices before undertaking any job that involves lifting these items. 

Slips, Trips and Falls

Slips and trips represent a significant cause of work related injury.  Slips and trips can result from contamination, obstacles, inappropriate footwear, reduced visibility, the environment and people’s attitudes.  Good workmanship and good housekeeping are practices that can help to prevent accidents and fires.  By removing waste materials to waste skips you can contribute significantly to good housekeeping.  You can also reduce the risk of slips and trips by properly routing any cables or hoses that you use, by ensuring that a safe place of work is, by ensuring that you always wear appropriate footwear, by considering whether the environment in which you will be working increases the risk of slips and trips and by taking responsibility for your own and your colleagues safety and appropriately containing any spills that you might discover.  Spills involving oil or hydraulic fluids represent a significant hazard, as they present a dangerous slip hazard and also involve substances that are both hazardous and flammable.  It is extremely important that your work area is kept clear of slip and trip hazards during lifting operations, when your own and your colleagues attention will be quite rightly focused on the lifting task at hand. 

Contact Risk

Contact with moving or falling objects is a significant hazard to personnel involved in lifting operations, as well as to personnel working close by, and can result in death or serious injury.  It is therefore vitally important that safe working practices are followed at all times during lifting operations to ensure that loads do not move, swing or fall.  

Training and Approval

All personnel need appropriate training and experience to be able to use work equipment safely.  Never use lifting equipment unless you have received suitable training and are qualified and competent to do so.  You should ensure that you are suitably qualified, competent and, where appropriate, have the necessary certifications to use the particular type of equipment that you will be working on.  All lifting operations should be controlled by an appointed, competent person who should brief all team members before the lifting operation is undertaken. 

The Lift Plan

To reduce the risk of loads moving or falling, all lifts should be planned.  Frequent or routine lifts may be subject to a generic lift plan, supported by an onsite risk assessment and team briefing.  For complex lifts, an individual and detailed lift plan should be documented.  All lift plans should be reviewed and approved by the appointed, competent person.  In particular, lifts should be planned so that personnel will not be standing or working directly beneath a load and so that the load will not be moved directly over people.  The lift plan should also provide an escape route in the event of unexpected movement of equipment or of the load. 

Suitable and Safe Equipment

It is important to ensure that all equipment used during lifting operations is safe and suitable for the job at hand.  Lifting equipment should be subjected to a detailed and thorough examination by a competent person prior to its first use on site, upon installation, when it has been disassembled and reassembled at a new location, if it has been involved in an incident, if it has been overloaded, if it has been subject to modification or major repair to safety critical components, if there have been changes in the condition of its use such as periods out of service, and for equipment used to lift personnel.  If you have any reason to doubt that such an examination has been carried out, do not use the equipment and report to your manager.  In addition, all items of electrical equipment should carry a valid appliance test certificate or label, to reduce the risk of electric shock.  Electric shock can result in death or severe burns. Serious injury can also result if someone falls or becomes incapacitated during lifting operations as a result of electric shock.  Testing should be carried out by suitably trained individuals.   You should also carry out a visual pre-use inspection of all equipment to ensure that it remains undamaged and ensure that all safety devices are fitted and are operational.  If any item of electrical equipment does not carry a valid test label, it should not be used and you should inform your manager. 

Load Integrity and Stability

Establishing load integrity and stability is also essential to reducing the risk of loads swinging, moving or falling during lifting.  All equipment operators and users should be familiar with the safe lifting capacity of the equipment and should understand the effects of changes in configuration.  The safe working load of the lifting system should be assessed, taking into account the configuration of the equipment and the operating environment where appropriate.  This safe working load should never be exceeded.  The load should possess sufficient integrity to withstand the forces applied during lifting and the method of rigging should ensure that the load remains stable and cannot tip, slip, swing or fall unintentionally.  For this reason, all rigging and thorough daily pre-use inspections should be carried out by competent personnel.  During jacking operations a firm level base should be provided against the load so that no sideways forces are present.  Loads should also be checked in increments to prevent the limit of the jack stroke from being reached. 

Human Factors

To reduce to risk of injury to other personnel from swinging, moving or falling loads, all non-essential personnel should be excluded from the area in which lifting operations are taking place.  Barriers and warning signs should be used where appropriate to facilitate this, especially as people can make mistakes and may break the rules.  These and other human factors play a significant role in safe lifting. Personnel should not undertake more than one task at a time during lifting operations and you should not take part in lifting operations if you are tired or otherwise unable to give your full attention to the task at hand. You should never come to work in possession of, or under the influence of, alcohol or drugs.  These substances expose everyone on site to risks that are unnecessary and easily avoided. 

Communication

Communication is a vital part of safe working practices during lifting operations.  The lifting appliance operator needs to be able to understand and obey an emergency stop signal no matter who gives it, and any member of the lifting team needs to be able to issue an emergency stop signal.  It is therefore vital that all members of the lift team establish, test and understand the verbal, hand signal or radio communications that will be used during the lift, prior to lifting. 

Personal Protective Equipment PPE

Personal Protective Equipment, or PPE, is an important means of reducing the risks associated with lifting operations.  At least standard PPE with safety glasses, a hard hat and industrial work gloves should be worn.  Only PPE in good working condition will reduce the hazards associated with your work, so it is important to remove, clean and store your PPE correctly.

Noise at Work

Hearing loss caused by exposure to noise at work is a significant source of occupational disease, with many people suffering deafness, tinnitus or other ear conditions as a result of exposure to excessive noise levels at work.  The level of noise and how long people are exposed to noise at work both contribute to potential hearing damage.  Noise can be reduced to harmless levels by using ear plugs and ear defenders in high noise areas. 

Emergency Procedures

In the event of an emergency while conducting lifting operations, lower any suspended loads, isolate any equipment that you have been using, make your work area safe and evacuate the area according to the site emergency procedures.  If you are involved in an accident, seek immediate assistance.  Lifting operations should never be carried out alone. 

Riskatmedia – Safety Videos