Category Archives: Hand Protection

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Respiratory Safety

THINGS YOU MAY NOT KNOW ABOUT TRAINS – PART II

Occasionally, we hear about a train derailment, or the spill of a hazardous material from a train car.  Today, we will share typical instructions that are given to railroad personnel in case of such an occurrence.  First, the train crew should notify the train dispatcher of such a derailment and the location where the train crew will meet the emergency response personnel.  

SAFETY IS OF THE MOST IMPORTANCE.  (THIS MEANS SAFETY TO YOU, THE OTHER EMERGENCY RESPONSE PERSONNEL AND THE PUBLIC.) THE FIRE CHIEF IS IN COMMAND – DO NOTHING WITHOUT HIS AUTHORITY. 

As earlier mentioned, railroad authorities notify train personnel of such a derailment and the location of their crew. At the time the railroad company notifies the 911 dispatcher of a hazardous spill, the dispatcher must ask the railroad the location of the train conductor, who will have all the shipping papers in his possession. 

Know what you are dealing with first; do not get over anxious and go into an area with a derailed car that has hazardous material leaking.  Take note of the wind direction and which area should be evacuated first, should an evacuation be necessary.  Establish a command center at this point and notify all people involved with this incident of its location.  The evacuation should be handled by the local Police Department. 

It is the primary job of the railroad personnel to protect the public from fumes, fire or possible explosion that may occur from a hazardous material spill.  At some point the fire chief will determine if outside help (county, state, federal) is needed and notify the mayor to start the phone calls for assistance.  Containment and blockades will be the responsibility of the public works department. 

The spill area belongs to the emergency response personnel under the supervision of the fire chief until the proper hazardous material personnel arrive on the scene to take over.  The fire chief still remains in command of the area until such time as he and other specialists consider it safe.  Railroad personnel are highly trained and equipped for these situations, and should keep thing under control. 

If EMS personnel and ambulances are not immediately needed, they should wait in the immediate area of the command center and at the fire chief’s disposal.  Railroad company personnel should be equipped with the proper PPE (personal protective equipment) to ensure compliance with all safety requirements, as well as protection for their safety. 

In the event of an accident involving a train, there is no place for onlookers.  Keep a safe distance away, or find another route. 

Source: Daniel Burlison – Retired Manager, Train Operations

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing

MINING SAFETY AND PROTECTIVE GEAR (GUEST POST)

2 Comments

Mineworkers that wear full safety clothing can address several dangers. All mines need to stipulate the mining safety and protective clothing required and the kind of activity to be carried out.

Old Hundred Gold Mine Tour

Purpose of the protective gear

Improved visibility: A gear with high visibility is critical in a mine particularly if dealing with high traffic. Retro reflective strips and bright colors always make the workers at the mining site visible.
Abrasion Resistance: Thick and tough leather offers high abrasion resistance in case of a crash though fabrics like cordura are also able to provide significant protection. Fabrics are waterproof, easy to maintain, cheap and quite comfortable during hot weather. Thick leather is uncomfortable during hot weather and could result in the loss of control and heat stress. There are fabric gears designed into a mesh-like pattern which provides cooling plus a more stable surface to attach the padding.
Padding: Quality pants and jackets offer significant extra padding within the joint regions that are more vulnerable. This takes the form of dual-density foam or simple foam padding. The integrated pieces are available inside some jackets.
Weather Protection: Protection against weather elements is very important in mines. At times, extreme weather makes the working conditions rather dangerous or unbearable.

What is the required protective gear for greater safety during mining?

Approaching safety experts is the best answer. Every safety expert is exposed to a number of risks in the mines and is a witness of accidents, nearing accidents, hazards and falls in all the weather conditions. Some of their recommendations on mine worker safety include:

  • Protective gear needs to conform to the anatomy but not the surrounding slide
  • The hands, head, knees, hips, shoulders and elbows are all vulnerable areas
  • A protective gear should be purchased not as some fashion statement but for protective purposes

Examples of specific protective gear items

  • Full-face helmet: This offers the most protection.  It is imperative that hardhats be worn.
  • Gloves: Gloves need to be designed specifically for a given mining activity. It is commonly made using cordura, Kevlar, leather or other given combinations. There are some with carbon fiber knuckle protection and other rigid padding forms. There are gloves that offer wrist protection.
    Jackets: Most jackets are made from ballistic nylon, leather, Kevlar, cordura and other related synthetics. Many jackets feature a special padding on the spine, elbows or shoulders.
    Pants: They include special protection for hips and knees. Cotton denim jeans that have Kevlar are preferred by some people.
    Boots: It’s specifically designed for the undertaken mining activity and includes plastic caps and reinforcement on the ankles or the toe area.
    Helmet Visor or Goggles: Something of utmost importance is eye protection. Metal pieces or pebbles that are kicked up towards your eye have sufficient momentum to render significant damage.
    Ear plugs: These devices offer protection against any hearing damage and reduce fatigue.
    Vests: Made using retro reflective materials with high-visibility color. It is possible to wear them over jackets so as to increase the possibility of remaining visible. This will more critical in adverse weather conditions.

Author bio:
This has been a post by Danny, a blogger from Australia. He is writing about business and human resources on behalf of Australia Mining, a company that provides information to people looking to get a job in mining.

Eye Protection, General Safety Issues, Hand Protection, Health Issues

FIVE TIPS FOR SAFE USE OF SWIMMING POOL CHEMICALS (GUEST POST)

3 Comments

“Doctor, I store the chemicals in a shed by the pool. He must have gotten into them when I wasn’t looking. How old? He’s four.”

Chlorine is a chemical commonly accepted for use in pools to kill bacteria and control algae, and it does that function well. However, according to EPA.gov, it must be used with some caution, because it is a chemical which can also be used around the house for cleaning and as a disinfectant. So what does that mean for the average pool owner? Here are 5 tips which can allow the safe use of pool chemicals:

1) Don’t drink the water. Though chlorine will keep the walls and bottom of your pool clean, some safety precautions must be taken as part of maintaining a safe swimming pool. It may seem a bit obvious, but everyone who uses the pool must be instructed not to drink the pool water. This is especially important for young children, who as we all know, are prone to playing in the water, sometimes taking a mouthful of pool water to spew it out in the air or on a friend.  In the course of that, the child might accidentally or without thinking drink some of the water. Make it clear – don’t drink the water.

2) Know how to use the chemicals. Because everyone who uses the pool brings their own contaminants, the chlorine used in swimming pools must be stronger than in other uses. While a household cleaner might contain a two percent concentration of chlorine, swimming pool chemicals may contain from twelve to ninety five percent chlorine. The chlorine is not used at that strength, but will be diluted substantially before use in the swimming pool. The proper administration of pool chemicals is therefore best left to adults to assure they are handled correctly, and mixed in the proper proportions. Make sure to read the instructions and learn about how to safely use the products. If necessary, take a class at a local location on the proper use and mixing of chlorine for the pool.

3) Safety pays. As cautioned by HealthyPools.org, a number of chemical-related pool incidents have been reported recently, including many visits to the emergency room, from the improper handling of pool chemicals. If safety precautions are not taken when handling pool chemicals, injuries can occur: inhaling fumes when opening containers, or accidentally splashing chemicals in the eyes when trying to mix the chemicals. Always wear protective gear, such as glasses and gloves, when mixing the pool chlorine.

4) Be prepared in case of emergency. Although many precautions will lessen the likelihood of accidents related to pool chemicals, it is still wise to be prepared in case of an accident. EPA.gov describes a process to ensure minimal damage from this type of accident. First, the person affected should describe what exactly happened, and how they are affected – how and where did they come in contact, and what part of their body did it affect. If it is an accident related to the eyes, the EPA suggests rinsing the eyes for 15 to 20 minutes in the shower or under a faucet, then calling the poison control center or 911. If the chemical was inhaled, get the person to fresh air and then make the appropriate phone calls. Add the phone number of poison control to the list of emergency contact numbers.

5) Store it safely. According to HealthyPools.org, caution is the word for adult administering the pool chemicals – first make sure those chemicals are safely stored. It is imperative to store chemicals properly to prevent them from mixing or getting wet unintentionally. Equally important – store pool chemicals out of the reach of children and animals. No one wants to see a crying child come in the house because of accidental contact with pool chemicals.

Time spent to correctly administer chemicals will not only keep the pool clean, but make sure that no one gets hurt during pool maintenance time. Do it wisely, and it will never lead to that scary trip to the emergency room to treat a toddler exposed to chemicals.

Becky Flanigan is a freelance writer for InTheSwim.com.  She has 3 kids with her wonderful husband – two boys and a girl – and two lovely golden retrievers.  She spends hours at her family swimming pool, watching the kids and dogs splash and play.  She is also a runner, and diligently training for her first half marathon.

Eye Protection, General Safety Issues, Hand Protection, Head Protection

MORE ELECTRICAL SAFETY IN THE WORKPLACE TIPS (GUEST POST)

 We all use electricity on a daily basis; it’s become a necessary part of everyday life. However we must remember the dangers of electricity as it can kill or severely injure a person or cause damage to properties. This could be from contact with an electrical current causing shock or burns, faults which could cause a fire or an explosion where electricity could be the source. Electrical hazards are estimated to cause around 300 deaths and 4000 injuries in US workplaces each year. It should not be forgotten about or underestimated. 

Electrical safety in the workplace is vital as we use electricity in in every job we do, from typing on our computers to boiling the kettle. It is something that all business owners and managers should be conscious of and in order to reduce the risk of accidents with electricity, it’s important to take some precautions. 

Electrical equipment should be tested on a regular basis. This could be checking them yourself or using PAT testing services, which is completed through visual checks and electronic tests to ensure safety is maintained. If you already suspect that something is faulty then take it out of use as soon as possible to prevent any hazards. 

Where equipment is being used every day, this is most important. Computers and tills are used in the workplace constantly and therefore pose a safety threat if not maintained. Kettles, ovens and food processors are used in cafes and restaurants but also in offices. As they are used so frequently in these environments, appliances need to be fit for use. A switch could be provided near each piece of equipment in order to cut off power in an emergency. When in a factory, electricity is heavily relied on and can be the most dangerous if anything goes wrong. The right safety measures need to be in place so this does not happen. 

Signs should be present to alert workers to electricity dangers. Low voltage cables are still hazardous and should be clearly marked to avoid anyone touching them. 

Employees need to have proper training to ensure that they can carry out tasks safely. Accidents can always potentially happen, but as an employer you need to keep your workers as safe as possible, otherwise if anything was to happen then legal action could be taken. If you are a business owner then it is your responsibility to make sure your employees are working in a safe environment, ultimately this should be paramount to your company policy.

The correct PPE should be furnished by the employer, protective gear that meets the needs of the workers.  Dielectric glasses, proper gloves, and hardhats that do not conduct electricity should be worn. 

Bio 

David Quarmby is an expert in electrical compliance and testing for businesses and is part of the ElectricalCerts group.

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Protective Clothing, Respiratory Safety

SAFE GRINDING OPERATIONS (GUEST POST)

1 Comment

Risk of Fire and Explosion

Grinding and allied processes produce molten metal, sparks, slag and hot work surfaces which pose a risk of fire and explosion, and which can result in fatalities, serious injury and plant damage. Flying sparks are the main cause of fire and explosion, especially as sparks can travel up to 10 metres from the work space. Sparks and molten metal can travel even greater distances when falling and can pass through and become lodged in cracks, clothing, pipe holes and other small openings. To reduce the risk of fire and explosion, a permit to work should be obtained before commencing grinding operations. Working areas and the areas below them should be kept free of combustible material. Fixed items of plant, such as installed electrical cables should be protected by a fire blanket. And sparks should be contained by means of a non-flammable material. Fire extinguishers should be close at hand, and the working area should be inspected when work is suspended to ensure there is no residual risk of fire or explosion.

Cutting Operations

Where cutting operations are performed, it is always important to give consideration to the effect that these operations will have on the stability of the work piece. In particular, consideration should be given to weight distribution, as the removal of significant weights may alter the balance of the work piece. Where appropriate, the work piece should be supported. You should also plan how items that have been removed will be lowered without risk to yourself, to others who may be working nearby, or to equipment.

Disk Burst

Serious injury can result when grinding wheels or disks burst, so it is important to take the steps necessary to reduce the risks associated with this hazard. Abrasive wheels should only be fitted by individuals who are trained and competent to do so. A pre-use check of portable grinding machines should be carried out to ensure that they are only fitted with reinforced discs, that the disc is suitable for the type of material to be ground, as well as for the speed of the machine and that guards are fitted and properly maintained. To avoid damaging discs, disc centres detaching and increased vibration levels, discs should always be applied at 90 degrees to the work piece to avoid the lateral stresses that leads to discs bursting. Uniform pressure should be applied during cutting and strategic cutting positions and / or restraints should be used where parent metal movement, which may result in snagging, is possible. All grinders have the potential to jolt when disc snagging occurs, which can result in serious injury. Where a Grinding Safety assessment indicates that snagging is a possibility, you should adopt a position that considers the direction the machine will move should snagging occur.

Training

All personnel need appropriate training and experience to be able to use work equipment safely. Never use grinding equipment unless you have received suitable training and are competent to do so, or you are receiving supervised training to reach this level of competence. Remember that contact with the grinding wheel can result in serious injury and that you should also wear protective clothing including Kevlar gloves and a visor to reduce the risk of injury.

Entanglement

When conducting grinding operations, it is also important that you wear close fitting garments. Make sure your overall sleeves are buttoned, that you do not wear a tie or jewellery and that you tie back long hair and long beards to reduce the risk of entanglement.

Personal Protective Equipment

PPE is an important means of reducing the risks associated with projectile particles during grinding operations. At least standard PPE with gauntlets, leathers, a cotton drill or fire retardant overalls and a full face visor with neck muff worn over goggles should be worn. Prolonged exposure to the dust produced during grinding operations can potentially result in scarring of the lung tissue and subsequent breathing difficulties. During prolonged or heavy operations, disposable respirators should be worn. For permanent grinders, an air fed all in one hood should be worn. Only PPE in good working condition will reduce the hazards associated with your work, so it is important to remove, clean and store your PPE correctly. All PPE should therefore be cleaned down with a soft brush before removing.

Noise at Work

Hearing loss caused by exposure to noise at work is a significant source of occupational disease, with many people suffering deafness, tinnitus or other ear conditions as a result of exposure to excessive noise levels at work. The level of noise and how long people are exposed to noise at work both contribute to potential hearing damage. Noise can be reduced to harmless levels by using ear plugs and ear defenders while conducting grinding operations and the use of hearing protection should be mandatory within high noise areas.

Hand Arm Vibration Syndrome HAVS

If you regularly use hand held grinders, you may be at risk of developing Hand Arm Vibration Syndrome or HAVS. This condition involves damage to the blood vessels, nerves and joints of the hand, wrist and arm. It is a painful and debilitating condition, resulting in numbness of the hands to the extent where it is impossible to feel with your fingers and very difficult for you to pick up small objects. This can make both occupational and leisure activities, such as playing darts, fishing or DIY, impossible. HAVS is entirely preventable. Always use the right tool for the job, as this will allow you to complete the job more quickly and will expose you to less hand-arm vibration. Carry out a pre-use inspection of all grinding equipment and report any damage to your supervisor, as faults and general wear may result in increased vibration. Try to reduce the amount of vibration you are exposed to in one go by doing other jobs in between grinding operations. Use a relaxed grip and avoid using excessive force on a tool or work piece. Store tools so that they do not have very cold handles when used next. Keep your hands warm and dry and take breaks to exercise your fingers regularly.

Sent to us by Kevin at Riskatmedia – Safety Video

General Safety Issues, Hand Protection, Respiratory Safety

WORKING WITH ASBESTOS? READ THIS! (GUEST POST)

By Joe McRobert
 
Asbestos is known as the ‘hidden killer’; it is generally not in plain sight, for example, you would find it in walls and ceilings, and it can be very dangerous. It can cause a number of diseases that could potentially be fatal, including Mesothelioma and Asbestosis. These diseases can be caused if the asbestos fibres are inhaled. This is why you need to be fully equipped when you are working with it. It is not always easy to identify either, so this makes it even more dangerous.
 
So if you are already working with asbestos or you are going to be, then you need to have all of the equipment to make sure you are safe. Here is a list of the equipment you need to ensure you are fully protected from the hidden killer.
 
Overalls
You will need overalls to cover the clothing you are wearing otherwise your clothing will be exposed to the asbestos fibres; not only would this be dangerous for you, it can also be dangerous for others near you as they may also inhale the fibres. You need to make sure you are fully covered, so you should avoid tucking your overalls into your boots because dust could get into your boots and you should avoid wearing long-sleeved t-shirts because they are more difficult to cover. You should be supplied with disposable overalls. One thing you should always remember is to not take home the used overalls!
 
Respiratory Protective Equipment
If you are going to be working with asbestos, then this is one of the most important items that should be provided. The respiratory protective equipment will allow you to breathe without the risk of inhaling the asbestos fibres, however you should make sure it is fitted correctly. If it is not fitted correctly, then you could still be at risk of inhaling the deadly fibres; once you have properly fitted your protective mask, you should then put the hood of the overalls up to cover the straps of your mask.
 
Gloves
Another very important item that should be worn every time you are going to be dealing with asbestos is gloves. Disposable gloves are the best for dealing with asbestos because you can dispose of them as soon as you have finished you job.
 
Footwear
Boots are the best type of footwear you can wear when working with asbestos; however, you should avoid wearing laced boots because they are more difficult to clean. The laces on your boots will be exposed to the fibres and you could potentially spread asbestos fibres outside of the workplace. Just make sure your overalls go over the top of the boots to avoid any dust entering your footwear.
 
Protect yourself from the hidden killer and make sure you have everything you need to safely complete the job. Remember that working with asbestos is a dangerous job and you need to be careful. Once you have prepared yourself for the job, you should then make sure anyone you are working with is also prepared. However, if you are ever exposed to asbestos, then be sure to seek medical advice and contact a solicitor, for example Flint Bishop Solicitors, to guide you through your next steps.
 
About the Author: Joe is a business coach that works with small businesses to improve processes for handling health and safety among other things. He is a regular contributor at http://www.businesswinners.net. 
Eye Protection, General Safety Issues, Hand Protection, Head Protection, Weather Protection

WINTER ITEMS TO HELP THOSE WHO WORK OUTDOORS STAY WARM

1 Comment

For all those persons who have to work outside – either during winter months or hot summer months, there are many ways to help you stay warm or cooler, depending on the season.  Since it’s winter for sure, let’s talk about the many safety items that offer extra warmth.  (We just happen to know where you can find several types of these, too): 

  1. Winter Liners:   There are different types of winter liners, all made to help keep your ears and neck warm underneath your hardhat or other type of headgear you must wear on the job.  Some have drawstrings so you can tighten them up, and others are stretchy so they can be pulled back over the brim of the hardhat.  These are not only excellent for workers, but for hunters, and others who enjoy the outdoors. 
  2. Warm Gloves: Nothing says “warm” like a toasty pair of gloves.  If our fingers are stiff, we aren’t able to function; frostbite may be just a nip away! 
  3. Hand or Foot Warmers:  These handy little hot packs keep the cold away.  They last for hours, too. (Please scroll down on this page to see the hot packs and some other excellent information.)
  4.  Boots: Everyone knows you must have a good foundation: boots that are comfortable in cold weather, and have good soles to keep you well-balanced all day! (Kind of like the cereal you have for breakfast!)
  5. Polarized Safety Glasses:  These won’t keep you warm, but our eyes risk being damaged by UV rays, winter or summer.  Glare off snow and ice can hurt your eyes.  Keep them protected by wearing some safety sunglasses with UV protection.
  6.  Heavy duty rainsuits and boots:  If you work in areas that are prone to rain, it’s good to keep this kind of personal protective equipment in your work vehicle.  That way it’s handy when you need it to keep you dry.

We hope all you outdoor workers and outdoorsmen and women stay safe, warm and dry this winer.  There is a myriad of occupational products just designed to help you stay that way. Our Parent Company, Texas America Safety Company, and Blog4Safety thank you for the opportunity to make these suggestions for your winter warmth.

 

 

General Safety Issues, Hand Protection, Head Protection, Protective Clothing, Weather Protection

TEN RULES FOR SAFE OUTDOOR PLAY THIS WINTER (GUEST POST)

By Barbara Williams of www.findababysitter.org 

With rising childhood obesity rates and the increasing illnesses that accompany a sedentary lifestyle, it’s no secret that kids should be encouraged to get outside and engage in active play. As the lower temperatures approach, so does cold and flu season, which can be greatly exacerbated when kids are held indoors where germs can easily be spread through respiratory droplets and exhalations. Keeping kids safe while they’re out in the cold, however, is an absolute necessity. The following guidelines can help you ensure that your kids’ activity levels don’t suffer at the onset of winter and that they stay safe until the spring thaw rolls around.

  1. Use Sunscreen – Protecting kids’ skin from the damaging rays of the sun is a major priority for most parents and caregivers during the summer months, but one that often falls to the wayside when temperatures cool down. In fact, the reflection of the sun off of snow and ice can be almost as damaging as direct exposure. Make sure that your youngsters are slathered with sunscreen before they hit the outdoors. Another tip is to protect their eyes with sunglasses that have UV protection. Glare from snow, and other bright winter backgrounds can damage their eyes the same as in warm weather.
  2. Waterproof Clothing is Key – Keeping kids warm during the winter chill relies heavily upon your ability to keep them dry. Melting ice and snow can leave most fabrics wet, soggy and very cold. Make sure that you invest in some waterproof or water-resistant clothing and shoes, especially proper boots.
  3. Know the Signs of Frostbite – Frostbite occurs when your child’s skin or extremities are literally frozen. The nose, ears, fingers, cheeks and toes are most commonly affected, and it can be quite dangerous when these extremities suffer from frostbite. Signs of superficial frostbite include itching, numbness, tingling or burning sensations. The affected skin may become white, flushed, yellow or blue and appear frozen, and will be cold to the touch.
  4. Dress for Success – Just because your kids are bundled against the cold doesn’t necessarily mean that they’re wearing safe clothing. Hoods and hats don’t take the place of helmets for activities like biking or skating, while tight clothing that restricts movement can present a danger as it inhibits kids’ ability to move and balance properly. Be sure that your brood is dressed appropriately for outdoor play, not just for cold temperatures.
  5. Insist on Warm-Up Breaks – When kids are enjoying themselves and are particularly absorbed in an activity, it’s easy for them to lose track of time. That’s why it’s important for you to insist on periodic warm-up breaks to check for signs of hypothermia or frostbite and ensure that they don’t get too cold.
  6. Keep Ice Skating Safe – Ice skating is a beloved, time-honored cold-weather outdoor activity. It can also be quite dangerous, though. Public areas designated for ice skating are far safer than ponds or bodies of water on your own property, which may not be thoroughly frozen and could crack under kids’ weight. Be sure that any ice your children are going to skate on is frozen solid, and that they’re wearing the right protective gear.
  7. Smart Sledding – Racing down a snow-covered hill on a sled is one of life’s great thrills, even for adults. Kids love sledding, but it’s important that they understand the basic safety rules before setting out. Sledding down hills that terminate near a road, down paths that have obstacles like jumps, rocks or bumps, or down icy slopes are all sledding safety no-nos. Kids should also never be pulled on sleds behind moving vehicles of any kind.
  8. Don’t Forget About Dehydration – Dehydration isn’t a concern reserved solely for warm-weather months. While your children are enjoying a session of outdoor play, be sure that they’re taking in plenty of fluids.
  9. Scarf Safety – Scarves are useful tools for protecting against the cold, as they can be wrapped around almost any part of the body that feels cold. However, they can also become ensnared in moving parts of toys or overhanging branches, closed in doors, or otherwise tangled in a manner that presents a strangulation risk. It’s better to opt for cowl-style scarves until kids are a bit older and less rambunctious.
  10. Double-Check Equipment – Making sure that any equipment for outdoor play, whether new or old, is in good condition, fits properly and is otherwise suitable for use before sending kids outside with it. Damaged or broken equipment can very easily cause injuries, especially if kids are using them improperly to compensate for the damage.

While outdoor play is important and can help to stave off cold-weather ailments, like the flu or the common cold, it’s important to understand that there are times when it’s simply too cold for your brood to safely be outside. Extreme temperatures can be very dangerous, causing a child’s body to lose heat faster than it can be generated. The end result is hypothermia, which can be life-threatening.

Fall Safety, General Safety Issues, Hand Protection, Head Protection, Home Safety Products, Weather Protection

AVOID WINTER-RELATED INJURIES AT HOME THIS SEASON (GUEST POST)

1 Comment

By Carrie Van Brunt-Wiley

Each season brings its own unique safety concerns for families. In the spring, allergies are rampant and unexpected rain showers can often make driving a challenge. In the fall, we worry about flu season and slipping on leaves in walkways and sidewalks. During the summer, there are heat waves and perilous slip ‘n slide injuries. The winter season often brings the widest variety of safety concerns, from cold weather and slippery road conditions to hazardous holiday decorations. Here are a few tips to help you keep your family safe this winter:

Cover up

If you work outside, like to play in the snow or otherwise spend a lot of time outside in the cold, cover up. Your extremities are the first to lose circulation in cold weather, so be sure to wear gloves and warm socks. Prevent the majority of your body heat from leaving your through the top of your head with a winter hat, and be sure to wear proper footwear. If you’re working in heavy snow, boots or other shoes with good traction are highly recommended to help prevent falls.

Remove ice and snow from walkways and stairs

Slippery surfaces are one of the leading causes of winter-related injuries. If your driveway, walkways and other surfaces you regularly use are buried under snow and ice, don’t try to walk on them until they’re cleared. Children and older guests are especially vulnerable to falls on slippery surfaces, so it’s extremely important to do some preventive maintenance and shovel your snow before any injuries are likely to occur. Keep in mind that many cities that suffer extreme weather require that you keep your sidewalk and driveway clear.

Injuries can also occur during the process of shoveling snow. It’s always a good idea to warm up before you start in order to avoid overexertion. Stretch your arms, back, legs and shoulders. Don’t be afraid to stop to rest for a couple of minutes if you start to feel tired or sore. Finally, take your time. Use a light-weight shovel and push small amounts to the side instead of trying to throw large amounts out of the way.

Use caution when decorating or undecorating

While holiday decorations help add some cheer to the winter season, they also come with their own set of dangerous hazards. Make sure your Christmas lights are plugged into safe sockets that won’t overload your electrical system. Never leave them plugged in while you’re away for an extended period of time, especially if you’ve got loose pets roaming around the home. If you’ve set up a real Christmas tree, make sure you water it often. A dry tree and hot lights are the perfect combination for a not-so-festive holiday fire.

Supervise children outside

When the first snowfall of the season occurs, everyone wants to run outside to build snowmen and snow angels and pelt each other with snowballs. It’s so exciting that it’s easy for a child to forget to put on a jacket, not to mention a cumbersome hat and gloves. As a parent, it’s your job to make sure your children are properly wrapped up for the winter weather. It’s also a good idea to coax them inside every hour or so with some hot chocolate or warm cookies to prevent them from losing too much body heat. It’s also easy to slip and fall on ice when you’re dodging speeding snowballs, and a snowball to the face has the power to knock the wind out of any poor victim. Keep an eye on your kids any time they’re outside in the snow to make sure they’re playing safely.

Following these tips will help you stay safe around the house. It also will help keep others safe when they visit or walk past your home. Then all you’ll have to worry about is the coming of the next allergy season.

This article was contributed by Carrie Van Brunt-Wiley, Editor of the HomeInsurance.com blog. Carrie has been writing insurance news and consumer information for HomeInsurance.com since 2008. She graduated from the University of North Carolina in Wilmington in 2005 with a B.A. in Professional Writing and Journalism.

Another winter tip that you may not know: children need eye protection from bright snow in the winter as well as sun and water in the summer.  Their eyes can be damaged just as easily as an adults’.  Sunglasses provide UV protection all year.  Pat

 

 

Eye Protection, Fall Safety, First Aid Safety, General Safety Issues, Hand Protection, Head Protection

HERE’S A NEW SPIN ON SAFETY: WATCH THIS VIDEO (GUEST POST)

In our everyday quest to bring safety to the forefront, we welcome guest authors from all over the world to present their take on safety.  It is amazing how many ways we all think about safety.  We recently heard about this video.  Based on the tune to “I’m Sexy and I Know It,” there’s a new version called “I’m Safety and I Know It”.  We think you will find it amusing, as well as presenting much of the safety equipment that is required to keep everyone SAFE!  Here is Dave Clare’s (General Manager of ATC) response to our request to share this video:

G’day Pat, 

We would be pleased if you would share about our video. As a non-profit organisation, we are hoping to reach out to as many people as we can about working safe. There are different regulations all around the world about safety, but the end game is all the  same, lets help people embrace safety as a part of what they do and how they do work and let everyone come home alive and in one piece. 

Safety is our No.1 core value at ATC and we wanted to find a fun way to make it relevant to a broad range of people. 

Sit back and enjoy this Australian video:

http://www.youtube.com/watch?feature=player_detailpage&v=PGxKPf9eEhg

Apprentice & Traineeship Co. Midwest is a not for profit company that works with engaged partners to inspire the development of tomorrows leading workforce…today!