Category Archives: Hand Protection

General Safety Issues, Hand Protection, Head Protection, Weather Protection

SAFETY MEASURES WHILE CONSTRUCTING HOMES (GUEST POST)

Another great article sent by Grace Beckett. 

Most homeowners rely on the contractor to take responsibility for any mishap that may happen to a laborer.  But the fact is that the homeowners are equally responsible in case of any untoward circumstances that occur during construction. Mishaps can happen due to negligence on the part of the labour or faulty procedures. 

The homeowner will be asked to pay necessary compensation or he may have to confront legal authority in case of any accident caused to the labour due to his negligence. Even fatal incidents are possible, when safety measures are not adopted in construction sites. For smooth completion of the construction process, the homeowner and labour must adopt certain best practices, some of which are listed below: 

Safety tips for labours and homeowners  

When constructing a basement, place supporting planks in the portion that is excavated. The planks prevent the sides from collapsing into slushy, soft soil. Even in partially-built areas, you should provide protection at excavated areas by installing signboards. You could also make lighting arrangements to prevent passersby from falling into pits.

Before cement is laid, the homeowner should make sure that the contractor is not using old, decayed construction material. Ant-bitten planks, which cannot take up much load, can be the cause of construction mishaps. 

When old buildings are brought down, the contractor may not always incorporate safety measures during the dismantling operation. So, the owner should also prevent the labour from moving near the construction area. Barricades can be erected to keep away trespassers as well. 

The tank built for water storage should be shallow to avoid fatal incidents such as children falling into it. You could instead increase the breadth and length of the tank to store a greater volume of water. The tank should also be provided with steps. 

From the point of view of safety, the homeowner should use electrical wires encased in plastic pipes or sticks of bamboo. In some cases, the steel bars on roofs are bent and touch the power lines passing close to the construction area; this may lead to accidents which can happen when these current-carrying electric wires are touched. 

Common-sense tips for labours and homeowners 

Ban alcohol and drugs: Prohibit the use of drugs or alcohol on the construction site as they give room for injuries due to impaired judgment. As it is very important that you as well as the labour have a clear focus on the task at hand, never allow drugs or alcohol to cloud your thoughts. 

Avoid getting angry: Anger distracts you from your purpose and while you’re in a construction site, you are more likely to hurt yourself. Don’t lose your focus while monitoring tasks on the site. 

Use of protective gear: Protective gear includes everything from sunscreens to sturdy safety helmets. Wear a hat or jacket to get protection from heat and cold. Distribute protective goggles and gloves to labours and instruct them to use them when working with power tools. Make sure you as well as the labour wear strong soled shoes as a form of protection against injuries.
Using correct tools: Make sure that the right tool is used for the task. When a tool is used for a task for which it is not designed, it leads to injuries. 

Grace is associated with SHS Ltd, a UK based company that is a balustrade supplier and a steel designing and manufacturing firm.

 

 

 

 

 

Eye Protection, General Safety Issues, Hand Protection, Head Protection

DECEMBER IS SAFE TOYS AND GIFTS AWARENESS MONTH

1 Comment

For several years, Prevent Blindness America has declared December as Safe Toys and Gifts Awareness Month.  For parents, grandparents and others shopping for children, there are many things to consider about the choices they make.  Children have been seen in emergency rooms due to choking, eye injuries, or even poisoning.  Most of this was caused by injuries due to poorly made items and misuse of toys. 

In a 2010 report from the U.S. Consumer Product Safety Commission,  it was estimated that hospital emergency rooms treated 251,700 toy-related injuries throughout the U.S.  Of that number, 72 percent of injuries were to those less than 15 years of age.  They also found that 46 percent of the 251,700 ER-treated injuries occurred to the head and face area.  Lacerations, abrasions, and contusions made up most of the injuries.

There are two things to keep in mind when shopping for toys:

(1)   Keep the age of the child in mind when purchasing gifts and consider their maturity level.  Read the age recommendations and any warnings on the packaging, and abide by them.

(2)   Select toys that are well constructed and meet the American society for testing and Materials’ (ASTM) approval.  You will see a label on the package if the item meets these standards. 

Prevent Blindness asks you to make these recommendations to family members and friends about gifts that you feel are appropriate for your child, and be diligent about inspecting the gifts before the child plays with them.  This may seem a little heartless at Christmas, but it’s better to be safe than sorry. 

Choose toys that are a developmental tool as well as a recreational activity for children, not to cause harm.  Children should be supervised at all times, and instructed on the proper use of the toy.  Labels are the best way to decide whether a toy or other item is right for a child.  Most new toys have appropriate age labels and these should be followed.  Stuffed items should be machine washable, fabric items should be non-flammable and/or flame resistant, and art supplies should read non-toxic.  Crayons and paints should say ASTM D-4236 on the package, ( evaluated by the American Society for Testing and Materials).  Outdoor recreational items such as skateboards or baseballs should be accompanied by the appropriate safety gear, such as helmets and gloves.  BB Guns should be given to only those of the proper age and maturity to handle them safely, and comfortable safety goggles should be included. 

Keep these tips in mind throughout the year, as children are given toys more often than just at Christmas.  It’s just a good time to emphasize that we want everyone to have a safe and happy holiday season! 

Source: PBA

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection

TEN PLUMBING SAFETY TIPS (GUEST POST)

Submitted by Jim Klossner 

Many people are choosing to DIY when repairs need to be done in their home. With the increase in home handymen, or handywomen, comes more risk because non-professional plumbers naturally will not think about some of the safety precautions. It is critical to take safety steps to ensure that you get the job done unscathed, as well as to make sure that the job is done correctly. 

Be Mindful of Electricity

Since plumbing usually does not involve electricity, many people do not think to turn off the electricity. Keep in mind that water and electricity do not mix. This is especially important if you are doing something near a power source. 

Do Not Panic

If something goes wrong, like a pipe bursting, do not panic. You need to take the steps to correct the issue as quickly as possible and panic will prevent this. Take a little time before even starting the task to think about some things that could go wrong and then make a few rough strategies to fix these. 

Make Sure Your Eyes are Protected

When you are cutting into things and have the risk of water spraying everywhere, it is important that your eyes are protected. There is always the risk of things flying at your face and when you are wearing protective goggles you can pretty much eliminate the risk of eye damage. 

Protect Your Ears

Plumbing work can get loud and the ears can become damaged with too much loud noise. Things like power saws and other equipment can become loud and ear damage can occur without you even noticing it.  Wearing earplugs will help protect your hearing.

Protect Your Lungs

When doing plumbing work, you are sure to run into some type of dust and/or chemical fumes. If chemicals are being used, a respirator is something you may want to consider. If you will only run into dust, then a basic face mask is enough to prevent breathing in the dust. 

Make Sure You Have the Right Tools

Using the wrong tools can result in injury. For example, if you need a chisel, use a chisel and not a screwdriver. The screwdriver could slip when you are hammering, resulting in slamming the hammer on your hand. The wrong tools could also damage the thing you are working on, causing more issues and costing you more money. 

Have Emergency Numbers and a Way to Call Them Handy

Accidents happen and you need to be prepared to get help if necessary. Numbers like poison control should be handy, as well as utility company numbers. Keep a phone nearby just in case something happens and you need to call quickly. 

Practice Before Doing

Before you start the actual job, get used to the tools you will need to use so that you are confident in using them. You do not want to just learn that new saw when it is time to get work done as this adds more pressure which can lead to mistakes. 

Protect Your Hands

Chemicals, tools and hot water are all potential hazards to your hands. Be sure to wear gloves that are appropriate to what you might run into. For example, gloves that protect against chemicals generally differ than gloves that can protect hands from hot water. If it also a good idea to wear long pants, long sleeves and shoes to protect all of your skin. 

Know Your Plumbing

It is important to know things like the type of pipes used in your home, where the on/off valves are and where the pipes are behind the walls so that you can quickly access what you need. You also want to be able to quickly get to things if something were to go wrong. 

About the Author: Jim Klossner has been writing about plumbing and HVAC solutions for companies like John J Cahill, Inc. for nearly ten years. When he’s not writing, you can find Jim teaching safety courses at his local community center.

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety

LOOKING FOR A DIFFERENT PRESENT FOR THAT “HARD-TO-BUY FOR” SOMEONE?

1 Comment

Look no further, friends, for quality safety products than Texas America Safety Company.

No more shopping in malls, crowded stores, or searching the “net”, when you can catch some useful things that your friends or family will enjoy having.  Giving the gift of safety means you really care. 

For the hard-working lady, we have all kinds of pink protective gear, ranging from pink hardhats to pink headsets.  Who says Mechanix is just for men?  Our pink Mechanix gloves are perfect fits for your favorite girl, to protect those delicate hands!  There are also some pink safety glasses that would complete the look. 

If you know someone who has hobbies, such as woodworking, or yardwork, goggles are a must!  T.A.S.C.O. has all types of goggles that will keep the eyes safe from flying particles, or sawdust.  Goggles are also needed for those who need exceptional eye protection at work. 

For your friends who like to ride bicycles or motorcycles, goggles also come in handy, as well as high visibility vests or high visibility decals that warn motorists to move aside and let them by! 

Anyone who works in manufacturing, construction, or other heavy duty-type work needs a good hardhat.  Ranging from team hardhats, (NCAA, NFL, MLB, NHL, NASCAR) to patriotic hardhats, or Western-style hardhats, and, if the company allows them to have their own personal hardhat, this is an excellent way to ensure compliance.  It’s fun to show your personality and team spirit with the just-right selection, at a very sensible price. 

Another great gift is a set of brim LED lights that clip onto a hardhat or baseball cap.  This would be an excellent way to be seen while riding after sunset.  For do-it-yourself tree trimmers, a chainsaw safety kit would be an excellent gift, offering a safe cutting.  (Always keep a first aid kit on standby, just in case!)

You may want to check out our huge selection of safety glasses.  Many styles don’t have the old “safety glass” look – they are stylish , and best of all,  priced lower than most sunglass stores.  The good thing about it is, they not only look cool, but also protect your eyes from harmful UV rays. 

A nice pair of leather gloves would be a welcome gift.  We have all types to choose from.

What person couldn’t use a Personal First Aid pouch to keep in their car?  Flashlights are also a must-have for your car.  There are so many things to select that we invite you to check out our website, www.tasco-safety.com.   We have linked some of our suggestions to make your shopping easier.   Place your order early for a timely arrival. 

Last but not least, if you call Texas America Safety Company (1-800-646-5346)  to place an order between now and Christmas, you will receive “Free Shipping”!  Just be sure to mention this to our customer service personnel, so you can get that savings. 

Have a safe and very happy holiday season.

Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Hearing Protection

FIVE SAFETY HAZARDS TO AVOID AT CONSTRUCTION SITES (GUEST POST)

Another great article sent to us by Saam Banai

Whether you work in construction, have construction going on in your home, or you commute by construction on a regular basis, there are many things that you should be aware of in order to stay safe from injury around construction sites.  Over the years, construction related injuries and deaths have decreased dramatically due to the federal efforts of OSHA towards “collaborative safety,” but we can still do our part to pay attention our own personal safety regardless of regulations outside of our control.

The Dangers of Heights

Perhaps the most dangerous element of construction sites is gravity.  Usually, heights are involved when constructing multi-floor buildings so it’s possible for workers to fall from high up.  This is when the need for fall protection equipment is imperative. It’s important to be aware of ledges and loose guard rails when working near the edge of a high story.  Additionally, it’s important to be aware of objects that are placed near these ledges.  Tools, boards, and metal pieces might fall on unsuspecting workers or bystanders, ones whom hopefully have access to the best injury lawyers.

Electric Hazards

Electricity is always flowing on construction sites.  Be aware of sockets and frayed wires when installing lights or working with power-tools.  If you’re doing work in your own home, do some research and talk to an electrician before digging into your walls.  There’s no sense in being a hero when repairing or installing electric components for yourself or your family.

Machines

Power-tools and large machines are obviously a source of danger on construction sites.  When operating heavy equipment like cranes or bobcats, be sure to understand all of the safety information in either the booklet or told to you by a professional.  Do the same when working with saws, nail guns, jackhammers, and soldering irons.

Chemical Hazards

Dangerous chemicals are perhaps some of the hardest hazards to avoid on construction sites, but only if you fail to have due diligence.  Asbestos, a cause for Mesothelioma, is one of the best examples of things to look out for.  Others include lead paint, varnish, solvents, and materials that are flammable.  Be sure to use masks and gloves when applicable.

Noise

This danger is less life threatening than others, but it can still cause unfavorable injury.  Constant work with jackhammers and other tools can result in loss of hearing.  That’s why it’s important to always wear protective ear guards when working with louder than normal equipment.  Noise can also prevent people from hearing the warning sounds of other dangers, like an approaching vehicle or falling object.

There are many things to avoid when working or walking around construction sites, and these are just a few.  If attention is paid, and regulations are followed, we can continue the trend of decreasing accidents over the years.  Everyone has to play their part though and be diligently aware of much that is going on while on the job.

Saam Banai is a freelance writer and editor.  He contributes this article for The Perecman Firm PLLC, some of the best injury lawyers in New York, specializing in construction accidents, workers’ compensation, wrongful death, and vehicle accidents.  They have helped victims of various accidents in New York City to obtain over $200 million in settlements and verdicts.

As Saam stated in this article, all types of occupational safety products are needed around construction sites.  Keep your employees safe at all times on the job. 

 

General Safety Issues, Hand Protection, Head Protection, Protective Clothing

BE ON THE WATCH FOR WINTER STORMS!

Do you know the difference between Winter Storm Watch, Winter Storm Warnings, and Winter Weather Advisories?  Chances are, most of us don’t; only those who must be out in those conditions to work or get to work pay attention to the forecast.  If you don’t understand, please read on: 

WATCHES:  According to weather professionals, there is a 50% chance that severe winter weather will materialize:

  •       Winter Storm Watch:  Possibility of severe life-threatening winter weather conditions that include: heavy ice and/or near-blizzard conditions, or heavy snow. 
  •       Blizzard Watch:  Blizzard conditions may happen.
  •       Lake-Effect Snow Watch:  Heavy lake effect snow likely.
  •       Wind Chill Watch:  Potential of wind chills of -25°F or less, causing risk of hypothermia and rapid frostbite. 

WARNING:

  •       Winter Storm Warning:  Winter weather is expected to cause life-threatening public impact from winter hazards that include ice, near blizzard conditions, heavy snow, drifting snow and dangerous wind chills.
  •       Heavy Snow Warning:  When 7 inches or more of snow is expected in 12 hours or less, or 9 inches or more is expected in 24 hours or less. 
  •       Ice Storm Warning:  Issued for ½ inch or more of ice accumulation, which can cause damage to trees and power lines. 
  •       Blizzard Warning:  When blizzard conditions are about to happen or expected in the next 12 to 24 hours.  These include frequent gusts of or above 35 mph and falling, blowing and drifting of snow, reducing visibility to ¼ mile.
  •       Lake-Effect Snow Warning:  Potential of 7 inches or more of lake effect snow.
  •       Wind Chill Warning: Issued when the wind chill is expected to be -25°F or less.  In less than 10 minutes,  frostbite can happen.

ADVISORIES:

  •       Winter Weather Advisory: Hazardous combination of ice and snow that exceeds warning criteria.  These may be significant and/or life-threatening if proper precautions are disregarded.
  •       Snow Advisory: When forecasters are confident that the entire event will be snow and an average of 4-6 inches of snow is expected in 12 hours or less.
  •       Freezing Rain Advisory: These advisories are issued only when there is a high probability that the whole event will be freezing rain, resulting in very slippery roads.
  •       Snow and Blowing Wind Advisory:  Prediction of frequent gusts or sustained wind of 25 to 34 mph, accompanied by falling and blowing snow, which can occasionally reduce visibility to ¼ mile or less for three hours or more.
  •       Wind Chill Advisory: Given for wind chills of -15°F to -24°F.  

Brrrrrr!  For those of you who must work in these conditions, there are all types of warm weather gear you can layer to be more comfortable!  From winter liners for wearing  under hardhats or hoodies, tube style helmet liners, rainsuits, raincoats, cold weather work gloves, to Kevlar fiber heat sleeves that furnish insulation, check out Texas America Safety Company!  We are your winter warmth headquarters!

First Aid Safety, General Safety Issues, Hand Protection, Weather Protection

GEARING UP FOR WINTER SAFETY (GUEST POST)

Sent to us by Joel Joshi

Now that the calendar has turned to autumn, the countdown to winter has officially begun. As winter weather can be both severe and unpredictable, anyone who is exposed to the elements, whether to, from or in the workplace should maintain a high level of awareness and preparedness. Here are some helpful tips to keep in mind as the mercury starts to drop.

Know the Forecast, Be Prepared

It may seem self-explanatory, but knowing the weather is the easiest way to protect yourself from a cold, uncomfortable and potentially dangerous day on the jobsite.

Know the weather report before leaving home and plan accordingly. Try to dress in breathable, moisture wicking layers in order to conserve heat while allowing flexibility if the temperature should rise, with the outer layer being water/wind resistant.

If possible, try to balance warmth and dexterity, particularly if your job is hands-on. Protect your extremities: the head, hands and feet should be covered to avoid heat loss when the temperature dips. Although fingers stay warmer when in contact with one another in mittens, they are more cumbersome.  No matter what your role may be, ensure that the winter clothing you’ve chosen won’t compromise the equipment you need for your job.

Stay Hydrated

Dehydration is less easily apparent in the winter – but it’s just as dangerous of a threat! As the temperature falls, the level of physical exertion may not and water loss through sweat becomes easier to overlook. Don’t let this go unnoticed; doing so could lead to exhaustion, dizziness and muscle fatigue among other issues, multiplying the risk of error or injury.

Try to drink fluids throughout the day and go ahead and keep your thermos close at hand. Although coffee is commonly perceived as having dehydrating effects drinking coffee in moderation contributes positively to recommended daily fluid intake. The caffeine can increase alertness, and the warmth is obviously welcome on those cold mornings and evenings.

Watch Your Step!

Winter precipitation can cause problems in and around the workplace, particularly for those who work outside – but also because the wet snow can be tracked indoors where it will melt and create a slippery hazard in entranceways. 

The number one cause of accidents in the workplace is slips and falls, you can minimize the risks by taking some basic, proactive steps. Firstly, keep a mop close at hand in order to clean up wet spots and prevent slips. Secondly, keep walkways and entrances clear of snow, and use salt and sand to combat ice in these high traffic areas. Thirdly, consider wearing slip-resistant footwear when necessary. It may not always be fashionable but could save you from a rough tumble. Also, try to take smaller, more cautious steps in potentially icy/slippery areas.

When out on the jobsite, try to mark icy areas to prevent others from slipping. If you find a particularly icy spot, spread the word! Knowing to tread cautiously is often enough to prevent serious accidents.

Travel Safely

Whether headed into work or out to a jobsite, winter driving is inevitable for most workers. Beyond just taking it slow and driving defensively, be sure to equip your vehicle with the appropriate tires for the season. While all-weather tires may seem the cheaper option, a good pair of winter tires can protect you in ways all-seasons just can’t. Never cut costs on equipment that could save your life!

In addition to proper tires, ensure that your vehicle is equipped with a winter safety kit that has all of the essentials: anti-freeze, road flares, a warm blanket, a flashlight, jumper cables, a towrope/strap, waterproof matches, a first aid kit, a small shovel, extra high-energy food and a charger for any cellular devices.

Wrapping It Up

In winter, a little preparedness goes a long way. Spending just a little time planning for the changing conditions can help keep you and your co-workers safe from harm.

This post was shared with us by Workforce Compliance Safety, a safety consulting company from the cold climates of Alberta, Canada.

 Our thanks to Joel  for this great winter advice – we love hearing from our friends in Canada; and please stay warm and safe! Pat

General Safety Issues, Hand Protection, Respiratory Safety

Five Serious Issues To Be Aware Of In Older Homes (Guest Post)

1 Comment
Sent to us courtesy of Cormac Reynolds.
 
Older homes come with a lot of character, especially when compared to the relatively dull designs of the modern day. However, whether you want a Victorian house in Brighton or a classical abode in Devon, there are a number of issues that continuingly rear their heads with old homes.
 
However, don’t let the thought of this put you off your dream – just make sure that the house is checked out before you purchase it. So, what are the issues to watch out for?
 
Piping and Wiring
 
One of the most common problems found with older homes comes in the shape of the pipes and wires used to bring utilities into the home. Lead pipes are very common in older homes that were built before the 1940s, however in some cases lead was used to join copper pipes until the 1980s. A filtration system is the best way to take care of issues caused by these pipes. A full refit will demand parts of the home to be destroyed and also costs significant amounts of money.
 
Old wiring can also be a serious issue in older homes and in many cases it is not grounded. This can be seen if the home has two prongs instead of three. Many parts of these older homes also didn’t come with ground fault interrupters in areas with water. This means that the power would not be cut off completely if it comes in touch with water. Building surveys can help with this sort of cable avoidance.
 
Cesspools and Septic Tanks
 
Many older homes that now run on the mains originally had wells or septic tanks on the property. This can cause all sorts of problems if a contractor unearths one unknowingly. They may need to be removed if you are intending on extending to a new area and it’s always best to have an underground utility detection survey before building onto any area of an old home.
 
Radon Gas
 
Considered to be a leading cause of lung cancer, radon gas enters the home through cracks in the floor. In the USA the Environmental Protection Agency estimates around 5 per cent of homes have Radon gas issues and advise a building survey to be done by contractors or home inspectors before moving in.
 
Asbestos
 
This material has been used since ancient times as an insulator and causes all sorts of problems. The material is often safe depending on the context it is used in. However, it’s always better to be safe than sorry and get it checked out. Asbestos was used for furnaces and boiler insulation and also for water pipes. If it needs to be removed a professional is required to do so.
 
Lead Paint
 
Another common problem from days of yore is the use of lead paint in homes, though is not harmful unless it is ingested. However, if you have small children around the home they tend to nibble on things such as work surfaces and this has been known to cause issues.  Exterior lead paint is also known to flake and end up becoming airborne and landing in vegetable patches, causing issues for plants and food stuffs.
 
If you are looking into purchasing an old home ensuring a good survey is done can help prevent any surprises or issues and ensure you home is perfect to live in.
 
Cormac Reynolds works for Sumo Services a UK company that provides underground survey and services all over the UK.
 
 For those folks who want to do certain repair jobs on their older home, there are all types of home safety PPEthat will be a good investment, such as gloves, goggles, and respirators.  In buildings with asbestos, one can never be too careful.
 
 
Eye Protection, General Safety Issues, Hand Protection, Protective Clothing, Respiratory Safety

WHEN FLOODS ATTACK (GUEST POST)

Sent to us by Rebecca Wilcox

Flooding can cause enormous issues with your home in more ways than one. Sure, there is the initial damage and inconvenience that can come from heavy flooding. This is the damage that most people tend to associate with flooding, though it is honestly one of the least damaging aspects of a flood. 

The most damage from a flood generally comes from the long-term effects of what standing water can do to a structure. This damage is often not readily apparent when the flooding starts to subside, but instead causes unseen damage over long periods of time. In the end, things like mold, wood rot, and mildew can have a worse impact on your home than the flood itself.

To help protect against long-term damage like this, it’s important to do everything you can to keep water from getting into your basement or any other part of your home. This can be accomplished in a number of different ways, but the steps you’ll need to take will vary depending on whether or not you have a basement. Basements add another layer of difficulty to the mix because they are often very difficult to seal against flooding. If you do have a basement, the best thing you can do is work with a contractor to seal it. This will likely be a fairly expensive job.

The other aspect of keeping your home free of flood damage is to have measures on hand that you can use to get rid of water once the flooding starts. If your preparations fail or are overwhelmed, you may be stuck pumping water out of your home yourself. If this happens, you should have a strong pump on hand to get the water out of your house. Tough, durable pumps like Tsurumi pumps are a great, affordable option for this. You want to make sure that your pump is affordable, but not cheap. After all, what good is a cheap pump that ends up costing you thousands in flood damage after it breaks down at a critical moment.

Floods can be absolutely catastrophic if you aren’t prepared for them. Even when you are prepared, there will always be at least a little damage resulting from a major flooding event. Despite this, it is very possible to mitigate the damage done by flooding when you take the time to prepare and equip yourself with the right kind of gear.

As Rebecca advises, be prepared to protect yourself with the right kind of personal protective gear.  From gloves, goggles, waterproof clothing, to rubber boots, your body must not be in contact with contamination from flood waters, mold and mildew.  Some types of destruction require professionals to assist with the clean-up.  Use caution when working in this type of environment. Pat

 

Eye Protection, General Safety Issues, Hand Protection, Head Protection

Common Safety Hazards and How to Avoid Them (Guest Post)

Written by Jeanie Barcus

Work environments and public environments are often filled with a wide variety of dangerous hazards. In many cases, these hazards can cause an individual serious bodily harm. However, it’s often possible to avoid these hazards by following the right safety steps. The following guide provides simple tips and tricks on how to avoid public safety hazards.

When working at a job, it’s important to make sure your employees and peers are all aware of the Occupational Safety and Hazard Administration (OSHA) guidelines. OSHA is designed to protect workers from dangerous conditions that are a serious safety hazard.

It’s always important to be aware of your surroundings. If an individual is working around heavy machinery, it’s important to make sure that one pays attention to the location of moving equipment at all times. All it takes is a brief lapse of attention for a serious accident to take place.

In addition, it’s important to make sure that you have access to the proper safety equipment when working in dangerous environments. Employers are required to provide the right safety equipment to employees. This can include chemical-proof clothing, boots, safety helmets, gas masks and a variety of other accessories. 

For example, working in some environments can expose an individual to a variety of dangerous toxins. If an individual works in an industrial setting, he or she may be exposed to trace levels of dangerous toxins like mercury, lead, asbestos and uranium. In these situations, it’s important to make sure that one has the proper safety equipment to ensure a safe working environment.

In addition, it’s essential to make sure that an employee coordinates with his or her peers. Without coordination, it can be difficult to respond to a problem in the correct way. In some cases, responding to a dangerous system in the wrong way can expose other people to a potential hazard. To avoid these types of problems, it’s important to remain in communication with one’s peers at all times. 

Since it can be difficult to avoid all safety hazards in a work environment or other public area, it’s important to be prepared for the consequences of an accident. In some cases, an accident can cause a loss of income for an individual and his or her family. If this happens, it’s important to get legal assistance as soon as possible. By hiring a professional accident attorney, it may be possible for an individual to recoup some of the losses that resulted from an accident.