Category Archives: Hand Protection

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Protective Clothing, Uncategorized

Safety Precautions to Take When Working with Electronic Equipment

Safety Precautions to Take When Working with Electronic Equipment

   

Safety Can be Confusing
Safety Can be Confusing

 

When working with or testing any electronic equipment, it’s always important to be cautious. Whatever type of equipment you’re handling, whether simple or complex, it’s important to take the right safety precautions.  

Working with electricity comes with huge risks that should never be taken lightly. If you’re a hobbyist who loves working with electronic components or an electronics professional at your workplace, safety should always come first.

 To avoid personal injury, possible damage to equipment or danger of fire, all work on electronic equipment should be conducted following these safety procedures.

 General Safety

 Before working on any electronics, consider following these basic safety precautions to help reduce any hazards.

•           Remove any electronic equipment you’re testing or working on from the power source.

•           Never assume the power circuit is off. Test and test again with a voltmeter to confirm.

•           Remove fuses and replace them only after the power to the circuit is disconnected.

•           Don’t connect power to a circuit until you’re done working on it and rechecked the work.

•           Always ensure that all electronics equipment is properly grounded

 •           If it’s damaged, replace it. For instance, replace cables instead of repairing with insulating tape.

 •           Always use the right electronics repair and maintenance tools.

 •           Always return covers after removing them to reduce the risk of electric shock. 

•           Make sure your circuit is not overloaded.

 •           Always have safety equipment like a fire extinguisher, a basic first aid kit and a mobile phone nearby.

 Personal Safety

 It’s important to ensure that you’re safe when working on electronic circuits. Here are some personal safety precautions to keep in mind: 

•           Always keep your work area dry.  

•           Always work in a well-ventilated area. 

•           Don’t wear flapping or loose clothing when working. 

•           Don’t work with metallic jewelry on your hands like watches, rings and bracelets.  

•           Don’t use bare hands to remove hot parts. 

•           Always wear non-conductive shoes. 

•           Always wear insulator gloves in your hands when carrying out repairs. 

•           When removing high-voltage charges on capacitors, always use a shorting stick. 

•           Don’t hold the test prods when measuring voltage over 300V. 

•           Always remove power to a circuit before connecting alligator clips. 

•           Always wear safety goggles.  

•           Be careful when handling large capacitors as they can still hold high voltage even after you’ve disconnected the circuit from power.

 High Voltage Safety

 One mistake that electronics experts make when doing repairs or maintenance work is assuming routine safety procedures after getting all too familiar with their work. It’s important to know that most electronic equipment use high-voltage that is dangerous and can be fatal. Always follow these safety precautions when working on or near high-voltage circuits.

 •           Don’t work on electronic equipment or make repairs with high voltage on. 

•           Don’t take chances doing what you’re not sure about. 

•           Consider using an isolation transformer when working on AC powered electronic circuits or equipment. 

•           Never tamper with interlocks. 

•           Don’t ground yourself: Make it a practice to use only one hand when connecting equipment to an electronic circuit.   

 

HighVoltagePowerSupply

Fire Safety Precautions 

When working with electronic equipment, there is often a risk of fire caused by a short circuit or other reason. Follow these precautionary steps: 

•           Avoid anything that would cause a fire around your working area like paper, cloth or other combustible materials. 

•           Look out for damaged wire insulation, overheating of electronic equipment, damaged circuit boards and corrosive components like batteries.  

•           If there is a burning smell on your electronic equipment, disconnect the power source. 

•           If there is a fire, use a nonconducting dry powder or CO2 fire extinguisher.  

•           Always check your circuit to be sure that everything is okay after repairs or maintenance before connecting power.  

Electric Shock

 One of the major hazards when working with electronic equipment is electric shock. To avoid this, you should take a few safety precautions, including: 

•           Always read safety procedures that come with every electronic equipment you’re about to test or work on.  

•           Recheck all wires for bad connections

 •           Always make sure that all parts of electronic equipment are well-mounted to prevent accidents.  

•           Keep electronic equipment away from water and other liquids 

•           Always check for signs of wear, defects and fraying on electronic equipment cables, cords and connectors.  

•           Use special safety rubber gloves and shoes. 

Testing Equipment 

With the increasing use of electronics in homes and workplaces, safety is becoming more and more important to consumers and service experts. If you’re an electronics expert offering repair and maintenance services, it’s important to invest in the right new or used testing equipment for your work—that ensures that you’re able to carry out your job safely.

 

 

Author Bio:

Arnold Sharpe is a freelance writer and an electronics expert working with the leading electronic testing equipment store in Los Angeles, CA. He reviews the latest home and office electronic equipment in the market.

 

Image 1: https://upload.wikimedia.org/wikipedia/commons/f/f8/Soldering_a_0805.jpg

Image 2: https://upload.wikimedia.org/wikipedia/commons/9/94/HighVoltagePowerSupply.jpg

General Safety Issues, Hand Protection, Protective Clothing, Weather Protection

3 tips for handling power lines after bad weather

Tornadoes have caused damage in multiple states across the country this year. As the Insurance Journal reports, Arkansas saw several possible tornadoes appear on March 13, with thousands of power outages lasting on into the next day. Illinois experienced a possible tornado the same week, and similar storms may have been spotted in Iowa as well. This last storm brought funnel clouds around the Quad Cities, as WQAD8 reported.

With all of this activity, companies are likely considering the implications of sending crews to respond to tornado damage. Power outages in particular can add to worker risk, since they could result from fallen lines that need to be carefully restored. Dealing with the cables safely can force crew members to rely on their protective clothing as well as any training or best practices they have.

The storm may have passed, but workers could still be facing some urgent dangers. Here are three tips to help crew stay safe while they do their job. In some cases, these are not only good pieces of advice but recommended by government agencies.

#1: Choose the right footwear
Before arriving at the site, workers can ask themselves whether or not they are ready to step out on potentially dangerous ground. After a tornado, simply walking from one spot to another can leave a crew member exposed to sharp edges. Foot protection should match the guidelines set out by the Occupational Safety & Health Administration, which listed foot and leg protection in its Personal Protective Equipment booklet.

Footwear is also important around the electrical source itself. The same booklet examined two types of shoes that can provide protection against electrical current: conductive shoes and electrical hazard, safety toe shoes. The latter “can protect against open circuits of up to 600 volts in dry conditions and should be used in conjunction with other insulating equipment and additional precautions to reduce the risk of a worker becoming a path for hazardous electrical energy.”

#2: Err on the side of caution
A separate fact sheet from OSHA also specifically addresses the dangers of working around fallen cables. The source noted how difficult it is to determine whether or not a cable is “on.” Instead, it recommended that workers should assume all cables they see are energized, which means avoiding any contact, even from inside a vehicle. Anything touching a downed wire is potentially dangerous.

Wearing sufficient hand protection, such as insulating rubber gloves, may let crews stay consistent with the other protective gear they’re wearing. It also helps to be mindful of overhead lines: the OSHA Contact With Power Lines etool advised staying ten feet away from these lines. Warning signs should clearly alert all crew to wires that aren’t very apparent.

#3: Keep a safe distance
A wire lying on the ground could seem harmless enough while the area around it provides the real trap. The same booklet states that some large objects, including buildings and fences, can carry current. The ground itself may also pose a hazard, as “electricity can spread outward through the ground in a circular shape” starting at the edge of the wire.

As an extra precaution, crews need to make sure none of their additional equipment will conduct a charge. Relying on material that doesn’t conduct electricity at all makes this less of a likelihood: One example could be a ladder that isn’t made of metal. Keeping lines grounded or insulated also gives crews possible protection and reduced danger levels at the worksite.

Contact Texas America Safety Company for more information on protective gear. Stay ready for anything in the stormy season and keep your workers safe.

General Safety Issues, Hand Protection, Head Protection, Protective Clothing

Cleaning is Essential Part of Work Safety

1 Comment

Even the safest-looking workplaces have their own dangerous moments. If you think that nothing wrong could possibly come to you in the safety of your own calm office, think again. There are probably bookshelves near you, with books high above you that could fall off and concuss you. How are the power outlets handled? Are there any bare wires? If you are working in a paper-filled office, even the smallest sparks can lead to big fires if not handled immediately. And, believe it or not, all these dangers are doubled when you opt to do some cleaning around the office. Here are some tips on how to protect yourself and the office.

• If you are about to do some office cleaning, use gloves. Hand protection is important even in the smallest of instances. Rubber gloves can save you a nasty shock and spill if you accidentally come in contact with a bare wire. They will also protect your hands from all the toxins in the cleaning product you are using. Avoid gross rashes and itchy spots with ease, simply put on a pair of gloves while rubbing your desk with a cleaner product and all will be fine.

Cleaning is Essential Part of Work Safety

• If might seem laughable, but if you are working in a place with lots of shelves with files or books, and you are trying to dust them, or even just looking for a particular item, you should use some headgear. Imagine you inadvertently shake a bookcase as you are browsing through some volumes, and there are heavy and unchecked books or folders above you. One wrong step (or shake) will collapse a few of those volumes over your head and could easily lead to a bad concussion.

• Be wary of slippery spots on your floor or carpet. If you are one to have lunches in the office, surely you spilled something once or twice, but did not bother to thoroughly clean it. Some stains become slippery over time and you should protect yourself – and the ones coming into your office from them. Get some carpet cleaners to remove it, or even hire a cleaning agency to do regular office cleaning and keep your workplace safe. Yes, cleanliness sometimes is the key to safety. A professional cleaner will do a fine job of recognizing lasting and problematic stains and will remove them to bring the shine to your office.

• If you are working with a lot of office hardware, you should know that it is inevitable that something may eventually breakdown. Unless you are a mechanic or specialize in office appliance repairs, call an actual repairman to see to the problem. Do not be a hero and try to help out a colleague with a quick fix to a problem that you have no clue about. Leave the broken machinery as they are and call somebody who actually can fix them.

Cleaning is Essential Part of Work Safety2

It requires very little to work safely in your office. A small bit of effort put into a clean and organized office will do wonders for the state of your workplace. If you cannot do it yourself, get a cleaning company. The key thing here is to work safe, so expenses should not be an obstacle.
Read more basic cleaning tips on: finchleycarpetcleaners.org.uk

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Protective Clothing, Respiratory Safety

Protection Clothing for Cleaning

Cleaning is a necessary task that you are often times forced to do around your home and your office. Thanks to cleaning, you will have a refreshed environment and living conditions that are more than suitable for resting and relaxing. There are a lot of products and tools that can make your cleaning more effective and fast, but what you have to keep in mind is that home cleaning and office cleaning should be carefully executed.
If you want to be completely safe during your cleaning service, you need to consider some protection clothing. There is a lot of risk related to using the various cleaning solutions, some of which are far from safe. If you pay attention to labels, you will often notice the description saying ‘poison’, ‘toxic’ and ‘danger’. That alone should be enough to warn you of the threats and make you stay alert during your cleaning service. Acquire the following gear if you want to be safe:

– Gloves – even simple latex gloves can protect your skin from the chemicals and dangerous ingredients of various solutions you use in your everyday cleaning. If you have any skin problem, such as irritation, rash, itch and burn you will do well to avoid direct contact with the solutions you use in office and home cleaning. Gloves will not hinder your cleaning in any way, and they will not allow the dangerous liquid to come into contact with the skin on your hands. Thanks to a pair of gloves you can mix solutions without fear and wash dishes with any type of cleaning detergent.

Protection Clothing for Cleaning2

– Goggles – some of the cleaning products you use during your cleaning service can greatly irritate your eyes because of the fumes they release. In order to protect yourself from this danger, you should acquire a pair of specialized goggles to wear while cleaning. This will provide protection for your sight not only from the fumes of the chemicals, but also from dust and other debris that might get airborne during carpet cleaning for example. Goggles can usually be used multiple times, so definitely consider acquiring quality protection for your sight.

– Mask – cleaning solutions and more importantly the chemicals that are present inside them can sometimes lead to respiratory distress. To avoid breathing in the chemicals and fumes of the cleaning products you use during your cleaning service, you should always wear a mask. It will be your best line of defense when it comes to filtering the toxins of the cleaning products. This is especially the case with professional cleaners, who have to work with different cleaning solutions every single day. A mask will also prevent solid particles, such as dust and various others from entering your organism.

Protection Clothing for Cleaning

– Apron – aprons are very useful, especially those that provide pockets where you can put your extra cleaning equipment during your home cleaning. Not only will you stay clean if the job is a messy one, but also you will have everything you need with you and will not waste time.
A lot of these additions to your cleaning are not expensive at all and you can use most of them more than once. Definitely consider them to be safe during your cleaning.

More cleaning tips and advises find at: reliable carpet cleaning in Clapham

Eye Protection, General Safety Issues, Hand Protection, Home Safety Products, Respiratory Issues, Uncategorized

Protective Clothing and Work Safety during Plumbing

Before you begin working on any DIY projects or plumbing repairs, you would do well to review some of the simple basics concerning safety. By following certain methods you will spare yourself injury and failure as well as being able to complete your projects on time. The following safety tips should be followed no matter what type of project you’re after:

Protective Clothing and Work Safety during Plumbing2

• Stay informed
You need to check the local building and plumbing codes before you start working on your project. Knowing what you can do to make things work that way will keep things professional and safe when you need to be careful.

• Eye protection
Work only with safety glasses if you need to do any plumbing work done, especially if you suspect you may have anything that could potentially endanger your eyes. Any work that involves using a drill, snaking a drain, hammering, working under a sink or using a reciprocating saw will pose a danger and potential hazard for the eyes. Sometimes small objects, droplets of sewer water and so on may fly into your eyes if you lack proper protection, so make sure that never happens.

• Hand protection
You would do well to focus on wearing proper protection for your hands at all times when you work. Hands will often come into contact with different chemicals, sewer water and more when you work on plumbing. If your hands have any scratches you may risk infection, not to mention handling things that way is simply unsanitary. Whenever you use a drain machine of any sort, you would do well to use leather or latex gloves to protect yourself from the germs of your drain lines. Good drain gloves will not only protect your hands, but it will also become a good habit to handle tools with them for added safety.

Protective Clothing and Work Safety during Plumbing

• Lung protection
You will need to work with a face mask if you want to protect your lungs. Sanding, sawing and more are sometimes needed when you work on some plumbing projects, not to mention the unpleasant smell of sewer gases that would be filtered through a mask so you won’t have to inhale it.

• Being careful
You would do well to be extra careful whenever you’re handling any tools, as you will need to follow the manufacturer’s suggestions if you want to succeed. Many people are often injured when they don’t keep both hands on the power tools they use, not staying vigilant as they work and so forth. Don’t be one of them and keep your eyes open and your hands steady.

• Get some help
Having someone to give you a hand when you need it will make completing your tasks far easier to handle. Running a drain machine for example means you will need to have two hands on the cable, as well as someone else unplugging the machine when you’re done, not to mention other tasks that need more than a single pair of hands. This will be very useful whenever you deal with plumbing emergencies, as you never know what you may need.
Read more helpful practical tips go at: http://www.plumbingservicesplumbers.co.uk/bayswater-plumbers-W2/local-plumbers-bayswater.html

General Safety Issues, Hand Protection

Hand Protection Tips while Working

Hand injuries are extremely common on the job, no matter where you work, up to the point where nearly 80% of most common occupational injuries are hand injuries. There are hardly any jobs that don’t really use our hands in the process, so we need to take great care to avoid any accidents with our hands. There is much that can be done to avoid such issues, but for the most part common sense should be involved before you make any decisions. The following tips will give you more information you can count on to make a difference and protect your hands:

• Wearing gloves

This is the first line of defense against blisters, scrapes, burns, cuts and splinters you will have on the job, so look for several good pairs of work gloves you can count on to get you through your tasks without fail. Make sure you’ve chosen the right gloves and that they fit comfortably against your hands, allowing you to work with ease. You would do well to wear some chemical resistant gloves when you’re working with acids or caustics. There is no way to avoid things without proper protection, so never underestimate its importance. Always keep the insides of your gloves nice and clean, as any contaminants inside will only negate their protection. Make sure you replace your gloves as soon as you see any damage to their material. Always remember to use gloves when you’re using knives and box cutters and you need to do fine work with them and cut away from your body as you work.

Hand Protection Tips while Working2

• Working with machines

Always stay vigilant so you can avoid the terrible danger posed by machines with exposed moving parts. You need to make sure you use the proper controls built into the machine to stay safe, especially when it comes to machine guards and the tool rests used. Under no circumstances should you try to reach inside the machine while it is powered and unless you possess the necessary technical expertise and credentials to do so. You would also do well to keep all watches, rings and bracelets off your person to ensure they will not get in the way while you work. If there are any shavings you need to get out of the way when cleaning, never use your hands to do so but use a brush or a scraper to do it so you will not get hurt while cleaning.

• Staying vigilant

Always keep an eye on what you’re doing and make simple and smart choices so you can avoid any injuries while working on the job. Know all your potential sources of hazards and stay vigilant. Inspect your protective equipment and gloves as well as your hands after you’re done working if you’re handling dangerous chemicals. Never allow carelessness to become a danger to your safety. You would do well to keep your eyes open when you clean your machines and workplace as well, as sometimes periodic cleaning may need to be completed by a professional cleaning company trained in dealing with hazardous chemicals and similar problems.

Hand Protection Tips while Working

Check our website for more helpful tips

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection

Magnatech Guest Blog Post – Welding Eye Safety

While welding techniques have gradually improved over the years, there are still many risks that come with the job. This includes repeated contact with harmful dust, smoke and fumes as well as exposure to light and heat radiation. The CDC (Centers for Disease Control & Prevention) states that “each day about 2000 U.S. workers have a job-related eye injury that requires medical treatment. About one third of the injuries are treated in hospital emergency departments.”

There are many severe eye-related injuries that a worker can sustain, including small metallic particles that can strike the eye, leading to painful cuts and abrasions; the CDC reports that “metal slivers, wood chips, dust, and cement chips… nails, staples, or slivers of wood or metal [that] penetrate the eyeball and result in permanent loss of vision. Large objects may also strike the eye/face [and] chemical burns to one or both eyes from splashes of industrial chemicals or cleaning products are common.” Because of such serious wounds, it is essential for a welder to remain as safe as possible while doing their job, regardless of their levels of expertise and competence.

One of the most frequent and all-pervading injuries that a welder may experience given improper eye protection is known as photokeratitis or “welding arc flash.” This is a non-permanent condition, although it may affect your vision for some time given that it damages the tissue around the eye (although thankfully not the retina itself). In this case, the cells on the outer layer of your cornea are inadvertently burned by UV rays. This is similar to sunburn on the skin, but instead on the surface of your eye. Although the affected area will slowly heal over time, UV eye burns may take a great deal of time to recover from and, as you can imagine, they can be wholly excruciating to experience. You can read more about photokeratitis and its effects on the body here.

Welding eye injuries are extremely common and, regardless of whether you are doing a quick 30-second job or a 30-minute task, eye protection is a must. Utilizing a helmet as well as safety glasses or protective goggles is vital to effectively shield your vision. The U.S. Department of Labor OSHA (Occupational Safety & Health Administration) states that “goggles or other suitable eye protection shall be used during all gas welding or oxygen cutting operations… All operators and attendants of resistance welding or resistance brazing equipment shall use transparent face shields or goggles, depending on the particular job, to protect their faces or eyes.” PPE (Personal Protective Equipment) is also crucial.

PPE clothing should provide adequate coverage in case of sparks, fumes or smoke, as well as reducing the possibility of skin burns. In most cases, clothing manufactured from heavy cotton or a wool blend will better endure the outside elements of your workplace. Flame-resistant gloves and a flame-resistant apron are also essential protective attire. For more details on what you should wear when welding, ANSI (American National Standards Institute) offers some useful advice.

Although there have been notable advances in the manufacture of protective gear over the years, eye injuries are still widespread. This may be due to a low perception of the risk involved in the assignment itself, or perhaps because welders feel discomfort while wearing them. However, the discomfort caused by a serious eye injury will easily outweigh the pain caused from wearing a helmet and goggles for a small period of time. The Liberty Mutual Research Institute for Safety once estimated that a quarter of welding injuries are eye-related, so eye protection should always be enforced. In essence, it is important that workers are educated about the dangers they will encounter during their day-to-day routine, as well as implementing a “No Excuses” eye protection plan whenever someone is welding. Magnatech, LLC has been manufacturing systems for orbital tube and pipe welding applications for more than 40 years. We are proud to supply products that put an emphasis on reliability and user-friendliness.

If you would like more information on what we can do for you, please visit us online at Magnatech or call 860-653-2573 today.

Guest Post from Jaclyn Passaro

Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety, Protective Clothing, Respiratory Safety

Taking Preemptive Measures for Vehicle Accidents in Construction (Guest Post)

Since reducing the risk of fatal accidents and death rate within the construction industry is not an easy job, taking timely, effective preemptive measures is the only way out. Read further for a fair idea of what can be done and how!

The rate of accidents, injuries and deaths associated with the construction industry is much higher than most other areas of work. The most common reasons that make construction work perilous is possibility of deadly accidents with vehicles and falls from extreme height.

On an average, every third fatal accident at a construction site has one or more vehicles involved. Frequently occurring transport accidents at work include:

  1. Victims being stuck by moving vehicles, especially while reversing
  2. People falling from vehicles or hit by things falling from vehicles
  3. Overturning vehicles leading to serious injuries

What Can Be Done to Prevent Vehicle Accidents in Construction?

The first step towards reducing high death rate in construction industry is to reduce the risk of fatal accidents at construction sites that involve vehicles. Employers need to fulfill their legal duties and play a pivotal role in that case, especially by assessing risks and taking practical measures to ensure the safety of everyone around.

This may include maintaining accident records, training and consulting employees, and co-coordinating and cooperating contractors. The focus needs to be on planning and implementing collective safety measures, instead of giving individual measures extra importance. The basic idea should be to replace the hazardous with the harmless.

Taking Preemptive Measures for Vehicle Accidents in the Construction Industry

Practically, accident prevention should not start after the work has already begun on the construction site. Instead, designers, architects and planners can considerably diminish the risk of vehicle accidents by designing and planning well in the pre-build phase.

Risk assessment is the most important aspect that every employer ought to take care of, followed precisely by the conveyance of complete information to the contractors, verifying that the construction site is fully safe for the workers.

A thoroughly carried out risk assessment process involves:

Looking for Potential Hazards:

After you have evaluated the work the finished tasks, identify potential dangers that may be associated with the presence of heavy vehicles at the site. Operations such as reversing, loading and unloading always have a higher probability of damage being done at the workplace.

Factors that increase the likelihood of occurrence of such accidents more include rough terrain, continuous exposure to bad weather conditions, labor working under multiple contractors, and time pressure. You can involve both the workers and their contractors in the risk assessment process, explaining to them what has been planned to reduce the level of risk.

Try preventing the following things in particular:

  • Running over pedestrians
  • Overturning vehicles
  • Vehicle accidents caused by falls while climbing or working too close to power lines
  • Vehicle malfunctioning

Identifying Who May Be Harmed

Figuring out every possible factor that can harm individuals on the work site is the first step towards implementation of safety measures. This will include everyone from contractors, workers, self-employed individuals and even the general public. Pay special attention to the areas where vehicle movement is mandatory and you can’t exclude the public.

It is also possible to take note of the likely hazards during the designing stage while the construction cost estimation is being done. Take note of the design for safety and also ensure to calculate cost of making safety provisions.

Prepare an Action Plan after Evaluating the Risks

Evaluating the risks associated with each hazard on the site will help you calculate the possibility of harm and the level of severity. Check whether you have taken enough protective measures to ensure the safety of people on-site. Thoroughly revise all important aspects such as workplace design and signs and signals.  Ensure that all workers have the proper personal protective gear that is needed to complete the job safely.

Taking Action

Once the risk assessment process is completed, list all preventive measures based on priority. When it is time to take action, take all the workers and contractors along. Though your focus should be on implementing measures to prevent any accident from taking place in the first place, it will be equally important to have be prepared for the worst and have all emergency provisions in place too.

Author Bio: Laura Laurel is a Stanford graduate in civil engineer with specialization in Civil Designs, Cost Estimation and 3D Modeling. She began her career as a construction trainee at Viatechnik LLC, rose to be involved with road and bridge construction. She loves to write about Real Estate and Construction Related Subjects.

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection

SAFETY TIPS FOR A DIY HANDYMAN (GUEST POST)

 

Almost all handyman jobs involve risks and this is why it is important to ensure safety on the service site. Read on for some useful safety tips that’ll help you prevent injuries while working.

Since most handyman services involve lots of hazards, working without the right safety equipment and moving around carelessly can lead to serious injuries. When grinding or welding without goggles, for instance, you’ll obviously end up getting metal particles in your eyes. So, why close the eyes to handy, hi-tech safety measures and equipment when they are easily available and invite plenty of risks!

Here are practical safety tips that are basically lessons learned by our handymen from their mistakes in the past:

1.Pressure Washers Can Peel Your Skin

Pressure washers are the most common handyman tools used to clean up areas like the patio and roof of a building. Since handymen get their attention diverted by a variety of stimuli in the open, they often make the mistake of holding the pressure washer and operating the trigger with only one hand. This can cause the spray wand to move across your hand, peeling the skin off.

It is important that as a professional, you understand and respect the power of water, especially when it is pressurized for cleaning the concrete etc. 

2. Bump-Nailing Can Nail Your Feet

The use of a framing nailer for fastening plywood to joints is a common practice for handymen. But when the nailer is set in bump mode, you need to be fully attentive, for forgetting to pushing the nose of the gun properly against the wood can lead to serious injuries. The worst, you may bump the nose of the gun at the wrong spot such as one of your own feet! Make sure you’ve properly bumped the gun-point on the target area before you pull the trigger. 

3. Safety against Electric Shocks is Important

One of the most important safety steps at a repair site is to check electricity wires using a non-contact tester before laying a hand on them. Commonly, handymen take off the fuse in a hurry and start disconnecting the wires from outlets. There maybe two circuits linked to the outlet, of which you have turned off only one. So, when you touch the wires barehanded, you’ll get knocked back by a powerful shove of electricity shooting up your entire body!

When performing such a job, don’t forget to test and double-check the wires with a tester. 

4. Sheet Metal Can Slice Your Body Parts 

Drilling holes in pieces of metals is another common handyman duty involving a great deal of risk. Handymen are often in a rush and don’t take time to compress the metal to a table etc. This can cause the drill to be caught by the sheet and thrown onto you, creating a deep rip on one of your body parts.

Before you start to drill a hole on a metal sheet, clamp it to a table and adjust your hand and the drill well.

 

Author Bio:

Dan Kogan is the owner of Handyman at your service which is a US based company providing Handyman Services to business owners at an affordable price. Handyman at your service specializing in TV installation NYC, Electrical work, Plumbing NYC, IKEA Assembly NYC and many more.

 

Eye Protection, General Safety Issues, Hand Protection, Head Protection, Protective Clothing

MAY IS NATIONAL ELECTRICAL SAFETY MONTH

Every year in the United States, workplace electrical incidents result in more than 300 deaths and 3,500 injuries.  While electrical hazards are not the leading cause of on-the-job injuries and fatalities, they are disproportionately fatal and costly.  For every 13 electrical injuries, a worker dies.   Knowing best practices of electrical safety are critical to reducing these staggering statistics because most of these injuries could be prevented. 

Electricity and electrical products play a fundamental role in how we conduct business every day. However, if not used or maintained appropriately, they can pose serious risks. Over the last ten years, more than 30,000 workers have been injured in workplace electrical accidents. These injuries not only disrupt the lives of the workers and their families, but also impact the productivity of employers. 

An arc flash is a sudden release of electrical energy through the air when a high-voltage gap exists and there is a breakdown between conductors. An arc flash gives off thermal radiation (heat) and bright, intense light that can cause burns and other injuries. Exposure to extreme temperatures burns the skin directly and ignites the clothing that the worker is wearing. 

An arc flash can be spontaneous, or can result from inadvertently bridging electrical contacts with a conducting object. Other causes may include dropped tools, the buildup of conductive dust, or corrosion. While great advances are being made to improve equipment design and thereby reduce the number of arc flash incidences, there is still much to be done. Each year, 2,000 workers are admitted to burn centers for treatment of severe arc flash burns. 

High-voltage arcs can also produce considerable pressure waves by rapidly heating the air and creating a blast. This pressure burst, or arc blast, can hit a worker with grenade-like force and send metal droplets from melted copper and aluminum electrical components shooting out at speeds up to 700 miles per hour – fast enough for the tiny shrapnel to penetrate ones body.  

Here are some important ways to prevent injuries and fatalities when working with electricity:

Every year, workers are injured or killed by circuits they thought were safely turned off. Simply shutting off the power is not enough. Hazardous conditions can still exist. You may not get a second chance to learn this important lesson, so always test before you touch! 

Most electrically-related fatalities and injuries could easily be avoided. Responsibility for your safety begins with you. Take steps to protect yourself everyday and make safety an integral part of how you do business. 

The number one way to prevent electrical injuries and fatalities is to turn off the equipment being worked on. It may take a little more time and planning, but your life and your health are worth it. Be proactive about de-energizing equipment and taking steps to ensure that your work environment remains safe. Working on energized equipment increases your risk of injury or death.

 

 Each day, nearly 3 million professionals participate in work activities where lockout/tagout procedures should be used. Unfortunately, too many workers still put themselves at risk by working energized or neglecting to follow their company’s lockout/tagout procedures. Year after year, failure to comply with the lockout/tagout standard is listed as one of the top OSHA violations. If the standards are followed, an estimated 120 fatalities and 50,000 injuries could be prevented annually. Get in the habit of doing this important step every time! 
Personal Protective Equipment (PPE) will be the major factor in differentiating between an electrical event you walk away from and one that requires months of painful healing. PPE comes in many different forms, including: hard hats, gloves, goggles, safety shoes, flame-resistant clothing, dielectric safety glasses, face shields, fall protection equipment, etc.Be sure to choose the PPE that is right for you and your circumstances. PPE should be:

  • Worn CORRECTLY; zipped, buttoned, etc
  • Appropriate for the hazard
  • Worn as the outermost layer
  • Maintained properly and removed from service when needed

This month serves as a reminder that we must always be extremely careful when working around electricity. 
  Source: ESFi (Electrical Safety Foundation international)