Category Archives: Hearing Protection

Back Safety, Eye Protection, General Safety Issues, Hand Protection, Hearing Protection, Respiratory Safety

AUTUMN LEAVES CAN BREAK YOUR BACK!

This is my favorite time of year, the leaves are falling, mornings are cool and crisp when Buddy and I go for our daily walk, football is underway, and THE TEXAS RANGERS ARE GOING TO THE WORLD SERIES!    What more could one ask for? 

But getting back to the subject, the leaves are falling off our pecan trees at a pretty fast pace now, and my husband isn’t looking forward to raking all of them.  He takes care of  the outside duties, such as mowing, gardening, and well, all of it, to be honest.  I don’t know if he would listen to any of the safety tips for doing all this yard work, but hopefully, some of you will find this helpful.

Wait until all the leaves have fallen off the trees before you start raking them.  If you overextend yourself at first, you may get tennis elbow or tendonitis.  Be sure to stretch first and warm up about 10 minutes before beginning.  You will need the right tools to make the job easier.  First, a good rake is worth a few extra dollars.  Be sure the rake is compatible to your height.  Wear leather gloves that help you grip the rake, and shoes with slip-proof soles, because wet leaves can be slippery.  When picking the leaves up, bend at the knees, not the waist to save your back.  Overloading the bags with leaves will make it too heavy, so use more bags.  If you suffer from allergies, wear a N95 dustmask. Many persons have allergies as severe in the fall as in the spring.  Also, you might want to spray your clothing with some type of bug repellent. 

Another fun fall project is pruning trees.  Be sure to look over the area around the trees and be sure there are no power lines running through them before you position your ladder.  Use the right tool for each job.  If you are using power tools, you may want to wear earplugs to soften the noise.  Also, watch for falling limbs, you never know when a big limb is going to come tumbling out of a  tree. 

Cleaning gutters is another job I’d rather not do.  But for those who have to do this, be sure the ladder you plan to use is in good condition and set it on a level place.  It is better to move the ladder as often as needed than stretch to reach something while you are on it.  An extension ladder is good for checking the roof or cleaning gutters. 

The U.S. Consumer Product Safety Commission says that there are more than 400,000 persons treated in emergency rooms annually that are victims of lawn and garden tool accidents.  Whether you are working with a mower, wood chipper, leaf blower, or any power tool, use caution.  Always wear safety glasses when doing yard work to protect your eyes.

There’s a lot to be said about the great outdoors, whether it’s your yard, somewhere you walk, or a favorite place you take your kids for an adventure.  The best policy is to be safe and aware of your surroundings.  There may be snakes that are hiding under leaves until they choose to hibernate.    Just be sure you are safe wherever you are.   One other tip, wildlife (such as deer)  is more active during this season, so watch for them while driving. 

Enjoy every minute of this fall, because one morning you’ll wake up, and there will be frost on the pumpkin!

Eye Protection, Hand Protection, Head Protection, Hearing Protection

HAZARDS OF HOT WORK

Welding, cutting, soldering, and brazing in construction, maintenance, and fabricating activities are considered “hot work” when there is a potential fire hazard present.  Many lives have been lost due to explosions caused by vapors contained in tanks or storage vessels that were ignited by a spark or welders’ torch.  The U.S. Chemical Safety Board has investigated numerous accidents that had been caused when doing this type of work, and found that many companies had not filed for a permit to do the work, or conducted any safety planning beforehand for contract welders and other workers.  Risks involved in performing hot work are asphyxiation, electric shock, air contamination, fire, and explosions. 

When hot work is being performed in confined spaces, such as silos, ship compartments, furnaces, pipelines, vessels, pits, vats, tanks, degreasers, these procedures are essential to ensure the safety of all involved in the work: 

  • Have written permit identifying hot work to be done;
  • In-depth hazards evaluation of location;
  • Safety training in the hazards of hot work;
  • Empty and purge tanks beforehand;
  • Check tanks, vessels, and pipe for corrosion;
  • Test atmosphere for suitable oxygen content;
  • Perform gas monitoring;
  • Gas detectors should always be used prior to and during hot work;
  • Vapors rise as outside temperature warms up, so continuous monitoring is important;
  • Keep vents open;
  • Be sure valves are leak-free;
  • Be sure all power sources are turned off;
  • Have NIOSH/MSHA approved breathing devices when required;
  • Equipment should never block exits;
  • Have constant communication with rescue personnel close-by. 

If there is any doubt regarding the hot work to be performed, a professional environmental specialist should check the air quality and make specific recommendations for the welding/cutting situation.  Special precautions should be taken.  Welders perform all sorts of work on a daily basis.  They know the risks involved and are specialists in their field.  They also understand that there are several types of PPE that they must utilize:

  •         Fire retardant welder’s cap;
  •         Welding helmet that contains the correct filter shade lens;
  •        Gloves that are tough, long-lasting, comfortable, and meet the   needs and hazards of the particular job;
  •         Earplugs or muffs in case of loud noise while performing the job, as well as protect the ears from debris;
  •        Goggles to protect the eyes. 

Welding is a job that requires much training and skill.  It is up to each company that hires either its own welders or contract welders to ensure their safety at all costs.

Source: CSB

                 AWS.org

Eye Protection, Head Protection, Hearing Protection

SAFETY FIRST IN MACHINE SHOPS

It there’s one place I would just as soon not enter, it’s a machine shop- there’s just too much going on!   Those who run any type of machinery, have to be very smart and very careful.  There are too many ways one can get injured around moving equipment, so we are going to mention some rules that apply to staying safe while working in this environment: 

1.      Shops should be kept clean.  Dirty, wet floors, tools left lying around, trash and debris should not be part of the picture.  A clean environment is a safe one.

2.      There should be enough space between machines and materials to maneuver.

3.      Walkways should be marked, to distinguish between work areas and safe walkways.

4.      There should be good ventilation in all machine shops.

5.      Be sure that flammable liquids are stored in closed containers.

6.      The correct type of fire extinguishers should be readily assessable:  Class A – Combination; Class B – Liquid Fuels; Class C- Electrical Fires.

7.      Persons with long hair/beards should tie them up in order not to get caught in a moving machine.  Do not braid long hair, as the entire hair could be pulled into a machine.

8.      Never wear jewelry, loose clothing, or gloves.  If you must wear gloves while preparing sharp materials, be sure to remove them before the machine is turned on.

9.      Open toe shoes (sandals) are forbidden in machine shops; steel toe boots are preferred.

10.  Never interfere with someone running another machine; their concentration may be disturbed, causing an accident.

11.  Understand the machine you are running.  Be completely familiar with it, and never leave it unattended.

12.  As in many other things, the buddy system is the safest.  Don’t be alone while running equipment.

13.  In cleaning your machine, do not use high-pressure air.  It can push chips into moving parts and cause wear on the machine.

14.  Wear the correct personal protective equipment, such as:

  •         Earplugs – protect your hearing based on the noise level of the equipment.
  •         Safety glasses, goggles, or faceshields – you must protect your eyes and face from flying objects, dust, etc. 
  •         In some shops where there are hoists to lift heavy objects, hardhats would also be required for safety.

Exercise caution when running machinery.  Work areas should have non-slip material for walkways, and all equipment should have working guards and covers.  There should be eyewash stations and first aid kits on hand.

   Machine tools can be hazardous- even for experienced machinists.  There are all kinds of opportunities in manufacturing, and it is a great trade to learn.  Just be very careful, as with many other occupations, we don’t have a replay button.

General Safety Issues, Hand Protection, Head Protection, Health Issues, Hearing Protection, Respiratory Safety

WHAT’S FOR DINNER? A SALUTE TO AMERICA’S FARMERS

1 Comment

As we go through our busy days, and think about what we’re going to prepare (or buy) for dinner, how many of us consider how that food got to the grocery store,  into our kitchens and onto our tables?  We have our farmers to thank for the blessings of  food.  Agriculture is a big business, and our farmers, dairymen, and ranchers, who grow our vegetables, fruits, beef and pork, as well as produce milk products, work hard to make a living. 

There are all types of farmers – from older ones who learned the hard way, to younger ones who utilize technology to improve agriculture on a larger scale, to part-time farmers who also have other occupations, to niche/boutique farmers who produce specialty products.  They all have different needs when it comes to safety and health.  Certain hazards for those on the farm are exposure to noise  from tractors and other equipment.  Many have hearing loss from years of running heavy equipment.  They are exposed to too much sun, which can cause skin cancer, and they breathe dust, and chemical fumes that can cause lung damage (farmers lung.) 

Children who grow up on farms learn at an early age  chores that they are expected to do to help their parents.  They are taught to be careful around livestock, as even the little animals can kick if the mood strikes them.  Two of the main hazards for youngsters who live in rural areas are machinery and drowning.  Drowning rates for all age groups are three times higher in rural regions than urban areas.  There are rivers, ponds, lakes, and canals that may be tempting for kids to jump into on a hot day.  Other causes of injuries to children on farms are livestock and falls. 

Future Farmers of America and 4-H Clubs are groups that young people interested in agriculture can join.  Many extension groups exist for women in farming, as well.  Our government has established many programs to help protect our farmers, such as agricultural-occupational health services.  Rural emergency services should be specially trained to treat injured farmers, ranchers, and their workers for injuries specific to their occupations.  Tractor-related injuries and deaths are hazards that most farmers face every day.  Pesticides that are needed to control crop damage are health-related risk factors, too.  

The National Safety Council estimates that approximately 160,000 agricultural workers suffer disabling injuries each year.  This may be a conservative estimate, as many accidents go unreported.  The National Agriculture Safety Database covers many of the risks farmers face, and recommends the proper use of personal protective equipment that meets the particular need: 

  • Head protection – For protection from falling objects, hard hats are the best.  Bump caps can also be worn for protection from ordinary scrapes and bumps, but do not protect from impact.
  • Eye protection – Wearing goggles, face shields, or safety glasses can prevent rocks, soil, crop materials, or foreign objects from being thrown into the eyes.  Chemicals from spray cans can also cause serious damage to the eyes. 
  • Foot protection – Safety footwear doesn’t have to look like it; there are types of  lightweight work boots that are designed for comfort and protection from dropped objects, stepping on sharp rocks, or maybe even being stepped on by an animal.
  • Hand protection – Gloves that are chemical-resistant should be worn anytime pesticides are being used.  Other work gloves protect the hands from hazards associated with most farm duties.
  • Breathing protection – dust from livestock or equipment can cause breathing problems.  Dust masks or respirators will help alleviate discomfort from trying to breathe under these conditions.
  • Protection from sick animals – Whenever treating a sick animal, wear eye protection and gloves, and cover open wounds on your body, as some diseases can be transmitted from animals to humans. 

We understand that almost every occupation has some risk of injury; however, September is Farm Safety Month, and this is our way of saying thanks for all they do, and to let them know how much we appreciate their hard work and the hazards they face to grow the products we all need.  “Thank You” to all of you who work in agriculture.  Stay safe!

General Safety Issues, Hearing Protection, Uncategorized

HAVE YOU HEARD THE LATEST?

Chances are you haven’t, if you are among the 22 million U.S. workers who are exposed to hazardous noise on the job, with about 9 million suffering from noise-induced hearing loss (NIHL).  Did you know that NIHL is the most common, permanent, and preventable occupational injury in the U.S?  Occupational hearing loss costs an estimated $242.4 million per year in disability extended across the workforce of our nation, according to NIOSH.

It is up to the employer to make the workplace quieter.  Prolonged exposure to excessive noise levels can cause permanent hearing loss.  They must know the levels of the noise that workers are exposed to and the risk to their hearing.  Employees who are exposed to a rate of 90 decibels or more an eight hour shift should have the noise level in their workplace reduced, or wear protective gear.  Sometime you have probably had tinnitus (ringing in the ears) or your ears felt stuffed up, when you walked away from a noisy area.  If this continues, you may have some hearing loss.

There are noise control devices that employees may wear, but require proper training on their use, as well as how to care for them. 

  • Industrial Earmuffs.  They totally cover the ears and should fit tightly, with no hair or other object to interfere with the seal.  The seals and inside of the earmuffs should be kept clean, and the headband should furnish good tension.
  • Hearing Protection Earplugs.  There are many types of earplugs that also should fit properly.  Workers should never share them, and have clean hands before inserting them.  The ear canal is 1 1/4″ long, and most earplugs are only 1/2″ to 3/4″ long.  They are premolded or have stems with which to insert them.

Hearing protection lowers the noise level of equipment, but does not eliminate it.  Workers are still able to hear the equipment and voices of co-workers.  A good sign that you need hearing protection is if you have to raise your voice to talk to someone an arms’ length away, or if you experience ringing or dull sounds after leaving a noisy place.

Work isn’t the only place that we are exposed to too much noise.  You might consider buying earplugs to wear in large crowds, concerts, car races, or sporting events.  I’ve been to some very loud football games, and the World Cup Soccer event proved that noise even interferes with the players’ concentration.  If you enjoy using power tools, earplugs will help protect your hearing.

There’s just one pair of ears to a customer, so take care of yours.  If you heed our warning, you won’t miss out on the latest news or juicy gossip!

Back Safety, Eye Protection, Hand Protection, Hearing Protection, Home Safety Products, Respiratory Safety

SAFETY TIPS FOR “DIY-ERS”

“Do It Yourself” projects became popular in the 1950’s, when people decided to make repairs or home improvements without paying professionals to do the job.  Sixty years later, there are many home improvement businesses that sell materials and tools for these projects, and even offer classes to “weekend warriors”.  Television launched the idea with “This Old House” with Bob Vila in 1979.  Today, there are many Do It Yourself programs on television, making any project look like a snap! 

Do It Yourselfers have a lot of determination and are willing to do the work involved, and take pride in their accomplishments.  These people are also aware that safety plays a big part in a successful project.  The U.S. Consumer Product Safety Commission reported that more than 4 million injuries occur during do-it-yourself projects.  One rule of thumb in playing it safe is to read instructions before tackling that task.  Manufacturer’s information is placed on all tools, and labels on paint, solvents and other products have safety guidelines to follow.  Wearing the right type of safety gear for the particular project is very important.  We’ve listed a few safety items that will help ensure your project is successful and that you emerge unscathed: 

  •     Safety glasses
  •     Respirators
  •     Earplugs/earmuffs
  •     Coveralls
  •     Gloves
  •     Kneepads
  •     industrial safety goggles 

Be sure that all power tools, extension cords and electrical outlets are in good repair.  Walls or surfaces for possible electrical wires or pipes should be checked before cutting, drilling, or hammering.  Special detectors are available at your local home improvement store.  Be sure that you power off and unplug power tools before making any adjustments. 

As always, be sure you lift heavy objects correctly, don’t bend your back. Last but not least, never wear loose clothing or jewelry, and pull back long hair when operating power tools, as they could become entangled. 

With safety in mind, forge ahead, and have fun with your project.

Eye Protection, General Safety Issues, Hand Protection, Hearing Protection, Respiratory Safety

Safety Tips for Mowing the Lawn

1 Comment

This summer, everyone will be outside working in their yards. Young people mow lawns to earn a little spending money while out of school. But did you know that in 1990, of the 87,000 people injured by lawnmowers, 20,000 were under 25 and 10,000 of those were younger than 15 years old.
Many injuries can be avoided by taking the proper precautions:

1. Wear safety glasses or goggles to protect the eyes against debris
2. Wear ear plugs or ear muffs to protect your hearing
3. Wear steel core or Kevlar gloves if you have to change the blades or remove anything clogging the mower after the blades have stopped moving and the machine is turned off. For more protection, pull the spark plug wire off so that the mower cannot unexpectedly start
4. Wear a respirator to keep the air you breathe while mowing clear of debris and dust

These products are readily available to you for your safety. Be prepared and be safe this summer.

Eye Protection, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, Protective Clothing, Respiratory Safety

HOW TO PREVENT WORKPLACE INJURIES

April is designated as Injury Prevention Month.  However, every month should carry the same theme.  According to the Bureau of Labor Statistics(BLS), in 2008, 5,071 Americans lost their lives as a result of workplace accidents.  This was down from 5,657 in 2007, but only because of the slowing economy.  About 3.6 million Americans suffer serious work-related injuries annually.

Because of the recent devastating coal mine explosion in West Virginia, we are reminded of how dangerous this industry is.  The BLS states that these employees are more likely to be hurt, suffer illness, or be killed than workers in private industries.  Coal mining companies should ensure the safety of their workers through many means, such as proper ventilation, firefighting equipment, air monitor systems, safe places they can escape to, etc.  It is suspected that many violations will be discovered once a Federal investigation is complete, as that particular mine had been issued over 100 citations, just this year.

Every company owes it to each and every employee to be assured that their safety is the Number One Priority.  Next, each employee should do all they can to ensure their safety and that of their fellow workers.  Here are some suggestions for workers’ security:

  • Heavy machinery/equipment operators know how their machines perform better than anyone, so their supervisors should work with them daily to ensure the machinery is checked often, and running safely at all times.
  • Workers should have an active role in company safety programs, by submitting safety suggestions, serving on safety committees, and participating in safety training.
  • Slippery floors, loose carpet, or other hazardous conditions should be reported to supervisors and taken care of as soon as possible.
  • First Aid training is a must.  There should be first aid kits in designated work areas, along with employees who know how to administer basic first aid in case of an accident.
  • Eyewash stations should be available and kept in clean, working condition.
  • Wearing the proper personal protective equipment as required is extremely important.  PPE is designed to protect specific parts of the body that are exposed to hazards.  It should fit properly and be worn at all times while working.  Employees should know how to care for their PPE and ask for its replacement when needed.
  • Companies should warn employees against improper behavior, such as horseplay.  Persons who like to play pranks on their co-workers may be endangering them.  Work environments should be pleasant, but not to the degree of being reckless.
  • Lifting objects that are too heavy is another source of injury.  If this is the case, lifting aids should be used in order to prevent back injury.

It’s hard to find many types of work that don’t carry a chance of injury.  From Anthropologists  to Zoo Keeper, all occupations present some sort of danger.  The best lesson for each individual is to be aware of the risks involved in their occupation and stay alert in order to remain safe each day.

Back Safety, Ergonomics, Eye Protection, Fall Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety, Protective Clothing, Respiratory Safety

LOOKING OUT FOR #1!

1 Comment

There aren’t many jobs in this world that don’t have a certain amount of risks involved.  Sure, a steelworker has a more dangerous job than a secretary sitting behind a desk!  But there are many hazards in even an office.  Tripping over wires, file cabinet drawers being left out, are just a few of the dangers lurking in an office.  It’s up to the individual to be safe.

Those who must wear Personal Protective Equipment, or PPE, have the responsibility of wearing it in the correct way, and not removing it while working.  Companies train employees in the proper use of PPE in relation to their job duties.  Employees should pay attention to the training they are given, and to the risks they encounter on an every-day basis.

Injuries occur at work, but many times they can be avoided.  Watching out for both yourself and the other guy will pay off.  Know your job hazards.  If you pay attention to your job, use common sense, avoid distractions, and follow company policies, hopefully you will go through your entire work experience without a scratch.

PPE is there for a reason:
There are many types of Personal Protective Equipment for hundreds of uses, but remember, it works best when used properly.  Your company can buy it for you, but it’s up to you to wear it and take care of it.  Be sure it fits comfortably.  If something becomes worn, report it to your supervisor, so it can be replaced.  Certain jobs at home require types of PPE, whether to protect your eyes with safety glasses or goggles while mowing the lawn, working in the shop, or wearing gloves when gardening.  Taking the time to put on a pair of gloves, glasses, or whatever is needed is the best way to be safe.  Whether your tasks are at home or work, play it safe!  Know your equipment and protect yourself at all times.

Back Safety, Ergonomics, Eye Protection, Fall Safety, First Aid Safety, General Safety Issues, Hand Protection, Head Protection, Hearing Protection, High Visibility Safety, Protective Clothing, Respiratory Safety

THE IMPORTANCE OF KNOWING WHAT WENT WRONG

One of the worst things that can happen to any business is for an employee to be injured on the job.  (It goes without saying, that it’s also a very unfortunate event for the employee.) Workers have the right to know exactly what is expected of them in their daily job performance.  They should be informed of any hazards associated with their duties and properly trained before beginning their job, and given the proper personal protective equipment that is required to ensure their safety.

Efficient businesses have policies and procedures, which should include a proper accident investigation and reporting plan.  Prevention, of course, is the key to avoiding accidents, but when they happen, someone must be assigned to be responsible in determining how and why the injury occurred.   Insufficient reporting of work-related accidents will lead to higher costs for employers.  It also must be reported to company management and workers comp providers in an accurate and timely manner.

Lost time accidents are costly to employers.  According to Cal/OSHA, for every dollar a company spends on direct costs of a workers’ injury, more dollars are spent to cover the hidden and indirect costs, such as:

  • Productive time lost by the injured employee;
  • Productive time lost by employees attending the accident victim;
  • Time to hire/retrain employee while victim is off work;
  • Clean up and start up of operations that were interrupted;
  • Paying employee all or part of wages, in addition to compensation;
  • Cost to repair damaged equipment;
  • Higher workers compensation rates;
  • Cost of paperwork involved in reporting accident.

Employers that do not furnish safe and healthful work practices for their workers are gambling with the future of their very own business.  Hazard assessments, risk management, and safety programs are essential for ensuring successful business practices for everyone involved.

Another angle to consider, as well, is that a thorough accident investigation will prove that the injury did occur on the job, and not elsewhere.  History shows that there are people in this world that will take advantage of their employer and sue them for an on-the-job injury that happened somewhere else.