Tag Archives: avoiding falls

Fall Safety, General Safety Issues

All About Height Safety Systems And Aluminum Roofs Guards

All About Height Safety Systems And Aluminum Roofs Guards 

Industrial accidents are one of the leading causes of fatal injuries and deaths. Falls from ladders and roofs are pretty common. To avoid such dangerous occurrences at your worksite, you may consider the use of height safety systems. Working at heights has its own set of hazards and difficulties. Common causes of falls are roof edges, slippery and damp surfaces, fall prone or fall risk surfaces. Roof has to be safety compliant under any circumstance. If you do not ensure this, you can land in trouble. There are hundreds of companies offering height safety systems to make working at greater heights, a safe and secured task. There is no chance of injury due to fall, if you tighten the safety system at your worksite. Fall protection systems or components may be constituted of aluminum material, due to the range of benefits it offers. Simply providing the employees their monthly salary will not do. As an employer, you must take necessary steps to save them from any type of accident or injury. This is important from the point of workers’ safety and from the point of your business reputation as well. Worker’s law of your state is really strict and if any worker is injured while working, your business place may be shut down or you may have to give hefty amount as compensation. To avoid such circumstances, it is better to choose suitable height safety system. Workplace must be safe for working to ensure the well-being, health and safety of employees.

Height Safety Systems made of Aluminum 

Aluminum is the best material for height safety systems. If you are confused what material to consider for fall devices, you cannot go wrong with aluminum. Items used in the site must be lightweight, rust resistant, durable and must require low maintenance. It is only aluminum which solves the whole purpose. It can bear any kind of weather condition, whatsoever. Even if the condition is wet, the items will not rust or corrode. The material is flexible and may be customized easily. Steel material is extremely strong and is difficult to customize much, unlike aluminum which is lightweight and flexible. Wood, on the other hand, can expand, chip and warp when the conditions are wet. So, Using Fall Protection and Height Safety System of Aluminum can Render the Following Benefits:

  • You can easily customize fall safety system to suit the roof specification and layout
  • You can get the entire range of roof protection system in aluminum material
  • Aluminum material is so flexible that you may create walkways out of them and make several roof safety zones as well
  • You can make changes to the items of aluminum to suit the roof layout

High Grade Height Safety Systems 

Roof safety systems of aluminum material can be used together to enhance the safety level. You may use aluminum walkways, guardrails or the access ladders as well.

Some of the Items that form the part of Height Safety Systems are as the following:

  • Roof walkways provide safe access to the roof. You may make wonderful walkway areas, free of hazards and trips. Aluminum walkway may be used on the roof to protect skylights and roof
  • To reduce the number of falls, use aluminum guardrails on your site. They may be installed around the roofs, fire escape areas, stairways and access hatch
  • to provide access to the roof mounted tools and equipment, one needs to use static lines
  • roof access ladder can be used to access any area situated at a greater height

To access roof edges or the fall risk areas, you must consider the installation of roof anchor points. All the items relating to height safety systems can last for decades if you consider aluminum material. Look for permanent height safety and fall protection solutions. The fall guard system must comply with Australian standards.

Fall Safety, General Safety Issues

AVOIDING FALLS IN THE WORKPLACE (GUEST POST)

1 Comment

Most of us don’t have workplace safety at the forefront of our minds when we are on the job. Unfortunately, injuries in the workplace are far from uncommon. The U.S. Department of Labor has reported that 15% of accidental deaths in the workplace are caused by falls, slips, or trips, and also account for an astounding 25% of all reported injuries.

Avoiding falls in the workplace should be a priority for not only employees, but also for the employers who are legally obligated to prevent them. While you may get out lucky with just a bruise or scrape, falls can often result in death. Going forward, follow these safety guidelines to stay safe on the job, avoid falls, and focus on the task at hand.

Avoiding Falls In The Workplace 1

Falls account for 25% of all workplace injuries. They can be prevented.

Where do Falls Occur?
Most reported falls occur at ground level, either by tripping over an object such as wires or slipping on a liquid such as oil. The remainder are from falling from higher areas such as ladders, rooftops, steps, or a higher floor.

Avoiding Falls In The Workplace 2

Never allow boxes or other objects in main walkways.

Precautions to Avoid Falls
Almost all workplace falls can be avoided either by wearing the proper safety equipment or by making sure that workplace conditions are safe before working. Here are a few tips to help prevent falls.

Create a workplace clean-up plan that must be followed daily. Housekeeping such as putting away loose objects, cleaning up spills as they happen, and ensuring all equipment is properly tied down will help prevent most falls from happening. 

  • Always use equipment for its intended purpose. For example, when reaching for something up high, a safety ladder is a much better choice than a desk chair.
  • Wear appropriate footwear for the environment. Make sure the footwear provides the traction and protection you need for your particular job.
  • Keep walkways clear. Boxes, cords, and hoses should never be left in main walking areas.
  • Work areas should be well-lit, and lights should be turned on upon entering any room.
  • Always be mindful of your environment. Paying attention to what is around you can be a preventative measure in itself.

Avoiding Falls In The Workplace 3

Always clean up spills right away to avoid slipping.

Why is Workplace Safety, and Avoiding Falls Important?

The main reason avoiding falls and following workplace safety protocol is important is to keep employees safe, free from injury, and to avoid accidental death. If you are injured on the job, you will be facing even more issues than your injury.

  • Will you have paid time off if the injury could have been prevented?
  • Will you have worries such as how to manage finances if you’re suddenly laid off‘ .
  • Will your health insurance cover the injuries sustained on the job?For employers, the cost of a fall in the workplace can be astronomical. Medical bills, paid leave, and legal fees are not worth ignoring safety protocol and ensuring injury prevention.

  • Falls can be prevented in the workplace. Following safety procedures, keeping the work areas clean and tidy, using equipment only as intended, and wearing safety harnesses when appropriate along with other safety gear will go a long way in the prevention of falls.

    Jessica Galbraith is a writer, blogger, and safety advocate.