Tag Archives: deadlines

General Safety Issues

INFORMATION ON SOFTWARE THAT HELPS BUSINESSES COMPLY WITH NEW HAZCOM AND GHS (GUEST POST)

DuraLabel software release helps businesses comply with new HazCom and GHS 

Information from Jack Rubinger 

Portland, OR—Global labeling system manufacturer Graphic Products, Inc., has released updates to its DuraSuite labeling software to align and comply with new chemical labeling and storage guidelines, both for HazCom 2012 (Domestic) and Globally Harmonized Standard (GHS International). Both standards were updated in April 2012, and require specific label formats. The new software release applies to DuraLabel industrial label printers. 

GHS compliance to become mandatory

In order to align with the GHS, two systems are currently in place: HazCom 2012 (for shipping chemicals within the United States) and GHS (the international standard). The new HazCom 2012 standards will not become enforced until 2015, but according to the schedule below, laboratory and chemical manufacturers must begin to change the way their chemicals are labeled.

The phase-in period, per OSHA, under the revised Hazard Communication Standard (HCS) is as follows:

  • December 1, 2013: Employers must train employees on new label elements and the safety data sheet (SDS) format.
  • June 1, 2015: Chemical manufacturers, importers, distributors and employers must be in compliance with all modified provisions but may continue to ship manufacturer-labeled products until December 1, 2015.
  • June 1, 2016: Employers must update alternative labeling and hazard communications programs as necessary and provide additional employee training for newly identified physical or health hazards. 

“EHS managers, industrial hygienists and safety officers from government, education, healthcare, transportation and manufacturing will be impacted by these new standards,” said James Serrano, GHS Resource Advisor for Graphic Products, Inc. “Our goal is to take the worry and stress out of the adoption process.” 

New standardized requirements

Changes have been made because, while chemical manufacturing historically has had a single system that complied with both international and domestic standards for handling hazardous chemicals, the chemical hazards were not easy to identify for the recipients, emergency responders and employees that may have been exposed to them. To address these issues both HazCom 2012 and GHS standards now require chemical manufacturers and importers to label chemical containers with the following:

  • Harmonized signal word
  • GHS pictograms
  • A hazard statement for each class and category
  • A precautionary statement
  • Supplier Information including phone number 

Cost to industry

Between updating label and safety sheet data, training, and management transition costs, the change in standards will cost U.S. industry an estimated $201 million a year on an annualized basis, according to OSHA.  DuraSuite allows users to begin selecting hundreds of chemical names from a database immediately instead of waiting until mandatory compliance is fineable. 

New features enable compliance with new standards

DuraSuite is provided at no cost with the purchase of DuraLabel printers, so users can easily create labels for transporting chemicals regardless of the chosen container or mode of transportation. 

Here are key software features and benefits: 

  • Drop-down menu to select from seven HazCom and four GHS compliant labeling templates
  • Search function to help users choose chemical by name, CAS, EC or UN number
  • More than 1500 chemicals preloaded in the database to reduce entry time — more chemicals than any other labeling software on the market
  • WYSIWYG (What you see is what you get) view for accurate layout changes
  • Little to no learning curve with familiar tool function — edit, save and delete.
  • Software applies specific compliance rules to the label generating symbols, statements and hazard signal words automatically from the input of any GHS-formatted SDS. 

Free upgrade for DuraSuite users

DuraSuite users can access the GHS/HazCom updates by visiting http://www.duralabel.com/durasuite/updates.php and downloading the 1.5.5.3 patch. DuraLabel Toro label printer users can call Graphic Products, Inc. at 888.326.9244 to request the upgrade on a flash drive. 

DuraLabel systems can be used to generate pipe marking, OSHA safety standards, arc flash, wayfinding, lockout/tagout, mine safety, wire marking, NFPA, barcoding, floor marking and custom labels. Every DuraLabel printer purchase includes a three-year warranty, DuraSuite label creation software and free technical support for life. 

Graphic Products manufactures industrial labeling equipment for global companies such as Amazon.com, Boeing, Intel, Proctor and Gamble, Johnson and Johnson, and Toyota. With more than 50 types of labeling supplies, Graphic Products, Inc. helps companies solve communication problems in the toughest industrial environments. For more information, visit www.DuraLabel.com.

About the author – Jack Rubinger

 

 

 

 

 

General Safety Issues

ANNOUNCEMENT REGARDING MSDS INFORMATION (Guest Post)

  • Portland, Oregon – Graphic Products, Inc., the world’s leading safety and industrial label printer and supplier, has released three new FREE labeling guides for facility and plant managers worldwide:  
    • Available Fault Current Labeling Guide: Provides an overview of the National Electrical Code Article 110 labeling requirements, recently updated in 2011. This guide contains information about required NEC compliant labels and includes labeling examples. It also highlights the method used to calculate available fault current, which must be displayed on labels.
    • OSHA HazCom 2012 Best Practices Guide for Labeling: Reviews the U.N.’s Globally Harmonized System of Classification and Labeling of Chemicals (GHS) standards. OSHA’s recent decision to adopt GHS standards means changes for most facilities as soon as December 1, 2013. This guide keeps you ahead of the curve by training your workers on OSHA-GHS standards before the deadline.
    • SDS Quick Reference Labeling Guide for HazCom 2012: Provides information on the U.N. Safety Data Sheet (SDS) format, which is replacing the old MSDS format. SDS is globally recognized. These sheets are an important element of the new GHS labeling standards. Use this guide to learn about SDS formatting and train workers before the December 1, 2013 deadline. 

    Graphic Products, Inc. launched the DuraLabel labeling system to facilitate pipe marking, OSHA/safety labeling, wayfinding signs and labels, arc flash, lockout/tagout, mine safety, wire marking, barcoding, and floor marking.

    Contact Graphic Products today to request these new guides and discover many other free informative guides. Visit www.GraphicProducts.com to learn more. To speak to a Graphic Products representative call 1-888-532-6787 or email fastresponse@graphicproducts.com. 

    The above information was sent to us by Jack Rubinger, with DuraLabel, who often sends helpful articles on industrial safety.  Our parent company, Texas America Safety Company, www.tasco-safety.com, also has all types of MSDS binders, MSDS posters, index dividers, attachment chains, Right to Know centers, racks, and even an “over the seat” holder for your car or truck.  This holds the notebook, MSDS binder, and clipboard .  Thanks to Jack for helping  ensure that you are compliant with the latest labeling or product changes.