Tag Archives: gas detectors

DIY GAS SAFETY TIPS FOR HOMEOWNERS (GUEST POST)

Homeowners often forget the hazards gas leakages can cause. Even though it’s common sense that smoking near inflammable things is hazardous, candles left overnight can cause fire hazards, but rarely does anyone pay attention to the safety of his or her home when it comes to gas hazards.

If you’re one of the many people who have unintentionally overlooked the importance of gas safety, here are some DIY tips for you. Make sure to use these tips to avoid gas hazards and ensure a safe and secure home for you and your family.

1.       Buy a Carbon monoxide Detector

The thing about gas is that you can’t see it. Since carbon monoxide is gas, you can’t see it but it can kill you if it spreads in your home due to a gas leak in a pipe, stove or fireplace. Buy a smoke detector, a carbon monoxide detector that can detect gas and alert you instantly so you can take necessary action.

2.       Keep Your Home Well Ventilated

Keeping your home well ventilated can prevent many hazards as cross ventilation allows an outlet for gas to move out of your home. Tight and congested places can contain gas, and the hazardous affect can come to surface sooner than you can call for help.

3.       Check Stoves, Fireplaces , Chimneys

Even though many people do follow this tip, it is extremely important to mention because gas leaks can cause severe hazards, fires and explosions. Always make sure to turn off stoves properly before stepping out of your home. Also, check for gas leaks around fireplaces and heaters. In addition, make sure the air passage from the chimney is clear; a blocked chimney can contain gas indoors and cause fire hazards.

4.       Keep a Look Out for Hazard Signs

Keep a check on all your gas appliances. If you see any condensation in the room, or dark patches around a gas appliance, may be its time to have it checked. If you see dull yellow flames when you turn on your stove, and see low gas pressure; it’s a sign of possible gas leakage. Be cautious of these signs and get in touch with a gas safety professional instantly.

Be Safe Rather than Sorry

Even though the above DIY tips come in handy, and are essential to know to ensure your home is safe, sometimes you can’t prevent hazards on your own. It’s better not to DIY gas related problems, such as fixing a gas leak, etc; leave it to the pros because they know best.

Many plumbing solutions providers offer expert plumbers who can fix your plumbing problems be it a gas leak or a hot water pipe burst. Get in touch with a professional gas plumber in Melbourne who knows his or her job well and is able to identify the problem and solve it in time for you. Many plumbing solution companies in Melbourne provide best quality gas plumbing services round the clock; because a gas leak doesn’t occur in day time, afternoon, or office hours – it can happen at any time of the day and it’s not a good idea to delay getting it fixed.  Qualified gas plumbers in Melbourne (or your home town) can help prevent gas hazards and make your home a safe haven.

Author Bio:

Alan Alaxandar is a writer having an experience in writing for small businesses currently he is writing for Doherty Plumbing Solutions who are professional plumbers in Melbourne, VIC. Find Alan on Twitter, Facebook, and on Google+

 

HOW TO BOOST SAFETY IN UNDERGROUND MINES (GUEST POST)

Underground mines can be highly dangerous as a result of the high risk nature of the environment. As miners are subject to gas, dust explosions and suffocation, accidents can occur when minimal safety precautions are put in place.

Safety regulations that have come into play over the past decade have dramatically reduced such mining incidents. However, certain mine dangers never go away. Methane, carbon monoxide, nitrogen and other potentially hazardous gases are still potential threats and mean that modern mines can also be hazardous places to work.

Many in the mining industry choose to have sophisticated safety technology in place to protect their mine from dangerous gas levels and environmental conditions. If you are looking to improve the safety measures in your mine, think about the following:

Gas Detection 

Any changes to gas levels can compromise your workforce. Miners work in a restrictive area cut off from natural daylight and open air, where further oxygen, nitrogen, carbon dioxide and methane are present. This leaves them exposed to potentially hazardous situations as any dangerous gas levels can affect breathing and cause fires or explosions.

While an electric safety lamp can be used to detect methane and firedamp, many modern mines choose to use a state-of-the-art fixed Trolex – gas detector.   The live data the sensor provides allows you to monitor several gases, assess any slight changes and make the correct safety decisions before it becomes disastrous.Effective ventilation systems

An underground ventilation system can help miners to remain safe and comfortable. It provides a constant air flow that dilutes and removes high risk gases, minimising a worker’s exposure to any dangerous levels. So that a ventilation system continues to normalise gases effectively, many mines invest in a flow sensor that detects any alterations in performance of the ventilation system, immediately alerting you to any potential hazards.

Mining machinery

Miners are often working with heavy duty machinery. Therefore, you should have safety programs in place to protect employees from possible danger, including suitable safety training, permits and personal protective equipment. It is also important to regularly check machinery to make sure that it is safe to use and kept to a suitable maintenance schedule. A machine monitoring system with temperature, pressure, vibration and oil level sensors allows you to survey machinery and check for a change in conditions that could compromise the safety of your workers.

Safety and efficiency

Boosting your overall mine safety with a monitoring system also gives you an opportunity to devise a valuable safety management program. Through being able to regularly analyse environmental and machine conditions, you can notice and remedy any potential pitfalls so that danger is kept at bay.

A strong safety management program also allows you to improve mine production efficiency. As the monitoring system gives you a general overview of your environment and machinery, you can check for any changes in performance, setting up any necessary maintenance to prevent unplanned and costly downtime.

Lauren writes content for Safety monitoring and gas detector specialists Trolex, and has written many digital articles about the mining and industrial markets for both the Trolex website and external sites.

For other forms of respiratory safety, check out www.tasco-safety.com for quality safety products.  If you mention the blog, you’ll get a 5% discount.