Tag Archives: hazards

INFORMATION ON NEW LOCKOUT/TAGOUT GUIDE (GUEST POST)

Graphic Products, Inc. Issues Lockout/Tagout Guide by Jack Rubinger. 

Portland, OR – An estimated 120 lives are saved and 50,000 injuries prevented each year by complying with OSHA lockout/tagout standards. Lockout/tagout, or LO/TO, is a procedure in which repairs are not made to machines until power sources are removed, locked out, tagged out and isolated. In response to this course of action, Graphic Products, Inc., has released the Safety Lockout/Tagout Best Practices Guide

“A large percentage of workplace accidents, as well as OSHA citations, are related to not using LO/TO or not following LO/TO procedures. The Best Practices Guide was developed to help reduce accidents by providing foundational information about LO/TO. We’ve produced this free best practices guide for our customers and are happy to make copies available to anyone who needs to learn the basics of LO/TO,” said Steve Stephenson, Chief Marketing Officer, Graphic Products.

 Included in this colorful guide are chapters about how accidental start-ups occur, a definition of stored energy, steps to install and remove lockout gear, a case study from an environmental health and safety professional plus an overview of commonly used LO/TO products and services. There’s also a section about reducing the number of potential injuries and fatalities possible from entrapment in confined spaces such as tanks and tunnels. LO/TO supplies include DuraLabel tag stock which includes holes to hang tags on piping systems and switches resists. Tag stock also resists moisture, UV rays and exposure to washdown chemicals. Finally, lockout padlocks, hasps and kits are included in the Graphic Products Facility & Safety Equipment catalog

OSHA’s standard for The Control of Hazardous Energy (Lockout/Tagout), Title 29, Code of Federal Regulations (CFR), Part 1910.147, addresses the practices and procedures necessary to disable machinery, thereby preventing the release of hazardous energy while employees perform servicing and maintenance activities. The standard outlines measures for controlling hazardous energies – electrical, mechanical, hydraulic, pneumatic, chemical, thermal, and other energy sources. 

“LO/TO devices help reduce injury tremendously. Types of equipment impacted by LO/TO are light ballasts, switches, motors and pumps — any equipment/circuit >50 volts to ground. Affected people are faculty, staff, and researchers,” said Jim Biddle, Manager, Industrial Hygiene & Environmental Programs, Northern Arizona State University. 

OSHA suggests the following steps for workplace safety: 

  • Develop, implement and enforce an energy control program
  • Ensure that lockout/tagout devices identify the individual users
  • Provide effective training 

About Graphic Products

Graphic Products, Inc. manufactures DuraLabel mobile and wide-format labeling systems used by manufacturers, international shipping lines, distribution centers, mining operations and oil refineries worldwide. The company offers more than 50 specialty labeling supplies for virtually any industrial demand. Customers include Amazon.com, Boeing, Intel and Toyota. Every DuraLabel printer purchase includes a three-year warranty, DuraSuite label creation software and free technical support for life. 

To underscore its commitment to visual communications, Graphic Products provides a growing selection of free published articles, handbooks, webinars, blogs, and informational videos.

To receive the free LO/TO guide, go to http://www.graphicproducts.com/free-gifts/free-safety-loto-bpg.php.

 

More information can be found by visiting www.duralabel.com, calling 1-888-326-9244 or emailing jarubinger@graphicproducts.com.

# # #

Electrical Devices and Testing (Guest Post)

 By Penny Cooper

With new gadgets, appliances and products being developed and many more being released in the market on a daily basis, our lives revolve around shunting from one electrical appliance to another. The three features of such electricity driven devices which has garnered them so much popularity is that they are affordable, easy to use and save us time. 

Advantages of electric gadgets & appliances  

To elaborate, when such devices were first introduced in the market, they were very expensive and considered a luxury item, but no more. This is because as demand for them has increased, so has their supply. Competitive pricing has ensured that cheaper versions of all such gadgets are easy to find and even easier to buy. 

Most such electrical appliances work on a simple closed circuit principle and can be turned off and on according to a conveniently placed, and plugged, switch with the simple flick of a hand, making them easy to operate. Lastly, these electricity charged devices be it a mixer, an oven or a printer save us a lot of time and energy which we can then channelize to a more constructive purpose.  

Dangers of such electric devices 

While the usefulness of such electricity powered devices has never been questioned, increasing number of deaths from exposure to raw electricity has certainly raised questions about the safety of such appliances in both, domestic and commercial settings. The most common dangers resulting from the use, and over use, of such electrical devices are infrared radiation, loss of electrical energy, short circuit, and in worst cases fire. 
Out of all these, the most potent threat posed by ill maintained electrical devices is infrared radiation which is known to have an adverse effect on our health, on long term exposure. What makes this infrared radiation dangerous is the fact that this kind of radiation is known to be absolutely undetectable to the human senses, and only specially designed and devised gadgets can isolate it and read its point of origin. 

Advantages of electrical testing 

This is why professional electric testing is simply a must for all domestic and industry spaces. While there are numerous electrical companies offering electrical testing, you need to find one that is reliable, affordable and thorough in their inspection. Also, it is generally a good idea to go with a company that is proficient in the latest developments in the electrical testing field, as this field is relatively new but evolving at a quick pace. 

Using cutting edge, new gadgets like the FLIR E40 Thermal Imaging Camera; such specialists can locate even the smallest radiation leak, overheating and electrical fault before it causes the circuitry in your establishment to trip or short out, thereby preventing the chances of a fire or electrocution.  

Not surprisingly, the USP of this useful handheld gadget is accurate and exact measurements of even the slightest temperature fluctuation that accompanies any and all electric faults, so that you and your electrical testing company can then nip them in the bud safely and in a timely manner.  

Penny is an expert associated with PASS, specialists in all aspects of electrical testing, test equipment and calibration. Visit http://www.pat-services.co.uk/flir-e40-thermal-imaging-camera-1844.htm to find out more about the new FLIR E40 Thermal Imaging Camera.

 

 

SAFETY IN THE CHEMISTRY LAB (GUEST POST)

By Maree Kyle

Safety is valued in any workplace, but in areas where dangerous materials and other hazards are present, it’s essential that workers and businesses create a safe environment where accidents are mitigated. Unfortunately, even the best workplace environments boasting well-trained workers are susceptible to the occasional accident, making it crucial that emergency protocols be developed and taught alongside accident prevention measures.

In chemistry laboratories, safety considerations are amplified. Accidents when working with volatile and potentially dangerous materials can be permanently damaging and, in some cases, fatal. Good chemical hygiene is of utmost importance and this encompasses many facets of lab operations. Here are some steps every lab should take to minimize the risk of an accident and to improve emergency response when mishaps do occur.

1. Demand storeroom organization

Maintaining organization and order in a storeroom makes for more efficient lab work, but it also greatly enhances safety in the workspace. Workers need to keep track of a number of chemicals, many with expiration dates, and old chemicals need to be properly disposed of. Additionally, better organization helps ensure property inventory levels of various chemical materials. A good approach to handling the storeroom is to put one worker in charge of the storeroom, managing its contents and handling upkeep as needed.

2. Display safety signs as intended

A little signage can be very helpful for reminding workers of the dangers present in the workplace. Make sure all signage is properly displayed to maximize its efficacy in helping workers avoid accidents.

3. Demand proper attire

It’s not unheard of that some confident chemists will occasionally decline to wear certain safety gear, considering it more a nuisance than a form of protection. But that’s a risky move that’s bound to end up in failure at some point. From the lab’s perspective, a failure to wear safety gear creates extra risks that could be a liability to the facility. Outline proper attire requirements in various situations and strongly enforce the protocol for failing to follow lab rules.

4. Clean, clean, clean

According to the Occupational Safety & Health Administration, the third-leading cause of workplace injuries is slips and falls. The vast majority of these are preventable by making sure hazards and obstacles are kept out of the workspace at all times. Clean floors, countertops and other workspaces frequently to eliminate fluids and other hazards that can lead to accidents. The lab should also be stocked with good materials for quickly and easily cleaning up messes. Other lab-specific safety measures include keeping clutter off of countertops, keeping excess chemicals in proper storage, and handling waste products properly and quickly.

5. Offer proper training on equipment

Greater familiarity with various lab equipment will prevent devices from being misused. Teach lab workers how to identify faulty devices, further preventing accidents resulting from equipment errors.

With so many dangerous materials present, chemistry labs can be particularly prone to serious accidents. Every lab needs to invest time and resources into educating their workers and instituting safety measures. Don’t let safety awareness be a one-time thing: Keep workers mindful of safety concerns with random inspections and continued training workshops to reduce your lab’s risk of a preventable accident.

Thanks, Maree, for this invaluable information regarding safety when working with chemicals.  Texas America Safety Company has a whole range of personal protective equipment to ensure employees’ safety at work. Pat

 

WORKPLACE SAFETY – EVERYONE’S RESPONSIBILITY (GUEST POST)

Sent to us by Maree Kyle

Workplace safety is a major concern for employees and management alike. While workers themselves have obvious reasons to be cautious and safe, business owners need to do their part in creating a safe environment to reduce their liability and the potential insurance costs that rise as workplace incidents become more likely. A number of practices need to be implemented if businesses are serious about creating a safer environment. While fiscally minded professionals may be eager to cut costs by skipping steps on some of these safety measures, preventative spending is often much more affordable than the costs incurred when an injury occurs. Here are some steps every business can take to identify points of concern and minimize risks for everyone, saving money while ensuring the well-being of the company’s employees. 

1. Conduct a job hazard analysis 

The best way to identify potentially unseen or underestimated risks in the workplace is to perform a job hazard analysis. Identifying uncontrolled hazards is the easiest way to prevent serious accidents in the workplace and, more importantly, accidents that wouldn’t be otherwise recognized. This analysis solicits the insight of employees who have likely observed their own safety risks. Employees can also be instrumental in developing solutions to these hazards. The company can then outline procedures to address these risks, eliminating potential accidents and possibly saving lives. 

2. Incorporate safety training 

Better training can often lead to fewer accidents in the workplace. Make sure your employees are properly trained on whatever equipment or tools they use. Likewise, be sure to familiarize all employees with the hazards and appropriate safety measures of their work environments. You might also want to incorporate on-site training to make sure emergency procedures are understood by everyone. 

3. Inspect safety equipment regularly 

Fire alarms, extinguishers, chemical showers and safety gear needs to be checked periodically to make sure it is still functioning properly. Set up a schedule in your workplace to make sure these devices have been maintained properly and are in working order in the event of an accident. Similarly, post proper signage throughout the workspace to keep workers, management and visitors mindful of hazardous areas. 

4. Perform random safety inspections 

Once your staff has been properly trained, implement randomized safety inspections to make sure proper procedures are being followed. Install a procedure for handling safety protocol lapses, including additional training and reprimands for failing to comply with workplace rules. 

5. Make sure management is on board 

Of course, instituting these various measures will have limited effect if management doesn’t understand their importance. Make sure you have the right management professionals in place to support these efforts and make sure they are properly incorporated into the work environment. It may be necessary to provide some training to management themselves to make sure they understand the importance of following safety protocols. 

Unfortunately for many workplaces, a common cause of worksite injuries isn’t necessarily a lack of safety guidelines, but a refusal to follow them. This risk underscores the importance of educating employees about the potential consequences, as well as implementing disciplinary procedures to make sure the rules are followed at all times. It only takes one broken or ignored rule to lead to an injury, creating a dangerous situation for workers and management. It takes effort from all sides to create meaningful change in the workplace.

The proper working safety equipment is imp0rtant to provide safety for each worker, depending on the job and its’ particular hazards. Pat

 

 

 

 

OSHA RECORDS AN AVERAGE OF SEVENTY CONFINED SPACE FATALITIES PER YEAR (GUEST POST)

By Jack Rubinger – Graphic Products responds with a Free Confined Spaces Best Practices Guide 

Portland, OR – About a million employees enter confined spaces every day, according to OSHA. In most cases, those workers complete their task without incident, but despite the many precautions in place, 70 workers per year never make it back out alive. Besides the ultimate price paid by workers, hefty fines arise if employers are found to be in noncompliance with OSHA regulations. In February of this year, a Texas-based energy company was fined more than $70,000 for confined space violations with hydraulic fracking tanks. 

Graphic Products, Inc., has made a business out of keeping workers safe worldwide. Determined to decrease this high count of confined space deaths, Graphic Products has released a free Confined Spaces Best Practices Guide to help workers, industrial hygienists and environmental health & safety coordinators deal with the very real dangers present in confined spaces. 

Confined spaces — which include storage tanks, ship compartments, pits, silos, wells, sewers, boilers, tunnels and pipelines — have limited or restricted means for entry or exit and it is not designed for continuous occupancy. Workers get trapped cleaning or doing repairs and maintenance in these spaces. Lacking a means of escape, their cries for help may go unheard. 

These spaces often have limited oxygen, or the air is toxic or combustible. This puts a ticking clock on the job and is the main reason workers don’t make it back out alive. Confined spaces that contain or have the potential to contain a serious atmospheric hazard should be classified as permit-required confined spaces and should be tested prior to entry and continually monitored, according to OSHA guidelines

Fully illustrated with photographs, diagrams, sample permits and signs and labels, this 18-page guide addresses: 

  • Identifying confined space locations
  • Sign and labeling materials for harsh industrial environments
  • Confined space permitting
  • Training programs
  • Supervisor and coordinator responsibilities
  • Entry and evacuation operations and procedures
  • Testing and monitoring equipment
  • The benefits of using industrial printers to create large format signs and labels that are more likely to be seen 

The new Confined Spaces Best Practices Guide is the most current resource in a growing collection which now includes the following free guides: 

  • Warehouse Safety Guide
  • Safety Inspection Workbook
  • Phosphorescent Marking Guide
  • Required PPE Guide
  • HCS/Hazcom 2012 Best Practices
  • Arc Flash Best Practices Guide
  • Medical Pipe Marking Guide
  • Marine Pipe Marking Guide 

Graphic Products, Inc. manufactures mobile and wide-format labeling systems used by sea shipping lines, distribution centers, mining operations and oil refineries worldwide. Customers include Amazon.com, Boeing, Intel and Toyota. With more than 50 types of labeling supplies, Graphic Products, Inc. helps companies solve communication problems in the toughest industrial environments. For more information, visit www.DuraLabel.com.

Common Safety Hazards and How to Avoid Them (Guest Post)

Written by Jeanie Barcus

Work environments and public environments are often filled with a wide variety of dangerous hazards. In many cases, these hazards can cause an individual serious bodily harm. However, it’s often possible to avoid these hazards by following the right safety steps. The following guide provides simple tips and tricks on how to avoid public safety hazards.

When working at a job, it’s important to make sure your employees and peers are all aware of the Occupational Safety and Hazard Administration (OSHA) guidelines. OSHA is designed to protect workers from dangerous conditions that are a serious safety hazard.

It’s always important to be aware of your surroundings. If an individual is working around heavy machinery, it’s important to make sure that one pays attention to the location of moving equipment at all times. All it takes is a brief lapse of attention for a serious accident to take place.

In addition, it’s important to make sure that you have access to the proper safety equipment when working in dangerous environments. Employers are required to provide the right safety equipment to employees. This can include chemical-proof clothing, boots, safety helmets, gas masks and a variety of other accessories. 

For example, working in some environments can expose an individual to a variety of dangerous toxins. If an individual works in an industrial setting, he or she may be exposed to trace levels of dangerous toxins like mercury, lead, asbestos and uranium. In these situations, it’s important to make sure that one has the proper safety equipment to ensure a safe working environment.

In addition, it’s essential to make sure that an employee coordinates with his or her peers. Without coordination, it can be difficult to respond to a problem in the correct way. In some cases, responding to a dangerous system in the wrong way can expose other people to a potential hazard. To avoid these types of problems, it’s important to remain in communication with one’s peers at all times. 

Since it can be difficult to avoid all safety hazards in a work environment or other public area, it’s important to be prepared for the consequences of an accident. In some cases, an accident can cause a loss of income for an individual and his or her family. If this happens, it’s important to get legal assistance as soon as possible. By hiring a professional accident attorney, it may be possible for an individual to recoup some of the losses that resulted from an accident.

 

OCTOBER IS EYE INJURY PREVENTION MONTH

Having  our eyes serve as  “windows to the world” is one of the most important gifts we have been given.  It is surprising how many accidents happen that affect the way we are able to see the world.  Equally surprising is that about one-half of eye injuries happen at work, while the other half occur at home. 

To avoid injuries in the workplace, here are some suggestions: 

  •          Always wear the appropriate protective eyewear on the job;
  •          Know what the safety dangers at work are;
  •          Eliminate hazards before starting work;
  •          Use machine guarding, work screens, or other engineering controls. 

Common causes for eye injuries are: 

  •          Flying objects (bits of metal, glass);
  •          Particles;
  •          Chemicals;
  •          Tools;
  •          Any combination of these,or other hazards. 

The type of safety protection that should be worn depends on the hazards in the workplace.  OSHA has regulations for face and eye protection; employers’ safety directors should determine which type is appropriate to ensure that the job is done safely.  Here are some examples of safety eyewear: 

  •          Sporty Safety Goggles (working with chemicals);
  •          Eyeglasses with side protection (side shields);
  •          Faceshields (working in the medical field, welding, lasers, or fiber obtics);
  •          Safety eyewear should be OSHA-compliant and approved by ANSI.
  •          Safety sunglasses should be UVA and UVB compliant to block strong rays that can damage the eyes. 

Eye injuries can happen at home, too.  When mowing the yard, using a power trimmer or edger, or clipping hedges and bushes, goggles would be a safe bet to protect your eyes.   In the workshop, working around tools, with solvents or other chemicals, or tasks that produce fragments, dust particles or other irritants, glasses with side protection or goggles would be best. 

In the house, there are many ways one can harm their eyes.  Never mix chemicals such as bleach and other common household products.  Many are very harmful and cause 125,000 eye injuries each year.  Foods can spatter hot oil or grease while being cooked.  Even curling irons have been known to cause injuries; just think about how close they are to your eyes and face! Be careful hammering nails into hard surfaces, because they could become projectiles. 

It’s really up to you to be prepared.  At home, keep the right kind of eye protection handy.  It only takes a few seconds to put it on; otherwise, it could take a long time to overcome an injury to your eye or eyes.  Be compliant at work and always wear your safety gear! 

If an injury occurs, see an ophthalmologist or go to the emergency room immediately, even if the eye injury seems minor.  Delaying medical attention can result in permanent vision loss or blindness. 

Source: AAO

A QUICK REVIEW OF SAFE CO-SLEEPING (Guest Post)

In the United States co-sleeping with your infant is an extremely controversial topic.  The American Academy of Pediatrics (or AAP) advices against bed-sharing and instead advocates for room-sharing. The Consumer Product Safety Commission agrees with the AAP and advises parents to not place their babies in adult beds. While there are definitely benefits to sharing a bed with your baby, in Western culture the risks seem to outweigh the benefits, which are as follows:

  • Easy and convenient breastfeeding
  • Sleep synchronization for mother and baby
  • Increased bonding
  • Baby can smell, hear, and feel their mother which may promote safer sleep via “protective arousal
  • Increase in nighttime sleep for both mother and baby.

The risks of bed-sharing include:

  • Suffocation
  • Entrapment
  • Strangulation
  • Rolling over onto baby
  • Knocking baby off of the bed
  • Increased risk of SIDS, in some cases.

Soft adult mattresses, loose bedding, bed frames, headboards, footboards, and positioning the bed close to walls may contribute to the risk of a baby being harmed or killed during bed-sharing.  In other cultures, where injuries and deaths related to bed-sharing are comparatively less, the cultural practices for bed-sharing are different. For example, in other cultures the mattresses may be firm and placed directly on the floor.

Infants who bed-share with siblings or with parents who are under the influence of drugs or alcohol and infants with parents who smoke could be at a greater risk for injury or death while co-sleeping.

The term co-sleeping and bed-sharing are often used interchangeably, but they have two separate meanings.   Dr. Sears offers clarification to the different terms. The term co-sleeping refers to sleeping close enough to the baby for easy comforting, while the term bed-sharing refers to mother and baby sleeping side by side in an adult bed.

Placing your baby in a safe, separate, and close sleep space offers the benefits as co-sleeping without the added risks associated with bed-sharing. In fact, the Arm’s Reach Co-sleeper Bassinet, recommended by co-sleeping advocate and pediatrician Dr. Sears, attaches to a parents bed and keeps the mother and baby close to each other while still providing the baby with a separate sleep space on a firm mattress, away from the parent’s bedding, headboard, and footboard, which can all contribute to suffocation, strangulation, entrapment, or even SIDS.

For parents who opt to bed-share, despise the warnings, they should:

  • Always put their baby to sleep on her back
  • Always ensure their baby’s head is not covered
  • Make sure that their headboard or footboard doesn’t have cutouts that could trap their baby
  • Not leave their baby alone in the bed
  • Ensure  that their bed is away from walls, which could trap their baby should he fall
  • Ensure their bed is away from blind cords and drapes to prevent strangulation.
  • Be sure that there are no crevices between the headboard and mattress, which could lead to entrapment.
  • Not use pillows, comforters or other fluffy, loose bedding

For parents who choose to co-sleep, they should:

  • Always put their baby to sleep on her back
  • Use a wearable sleep blanket, rather than loose bedding
  • Place nothing else in the bassinet or crib
  • Position the bassinet or crib away from blind cords and drapes
  • Be sure the mattress fits snugly into the bassinet  or crib
  • Be sure the bassinet or crib sheet fits snugly and securely.

So, is co-sleeping safe?

Yes. The safest place for a baby to sleep is in a safe and separate sleep space, in the parents’ room, within arm’s reach away from his mother.

Sent to us by Sara Dawkins. pb

 

Construction Health and Safety: Working in Confined Spaces (Guest Post)

In the UK, the construction and maintenance industries remain consistently one of the largest employers, with the current figures showing that over 2 million people work in this industry every day. However, it is one of the most hazardous places to work, with construction workers facing a variety of risks and dangers as they carry out their tasks on a daily basis.  Therefore, without the correct education, training and awareness, working in this environment can be potentially dangerous. The Health and Safety Executive (HSE), the authority which lays down the health and safety law in the UK, gives regulations on a variety of construction areas to make sure that workers’ wellbeing and health is looked after properly by their employers.

When working in the construction and maintenance industry you may be faced with working in a confined space – especially if you work on the docks, or in the sewage or mining industries. In January of 1998, the Confined Spaces Regulation came into force in the UK, which set out the legislation surrounding Health and Safety in these circumstances.

The HSE gives the following definition of a “confined space”: any place, including chamber, tank, vat, silo, pit, trench, pipe sewer, flue, well or other similar space in which, by virtue of its enclosed nature, there arises a reasonably foreseeable specified risk (http://www.legislation.gov.uk/uksi/1997/1713/regulation/1/made). Due to the nature of the environment, it can be very dangerous to work in as there are many volatile characteristics to a confined space, for example, lack of oxygen, presence of gas or fumes, liquids which can suddenly rise in level or free flowing solids. With these risks present, there is no wonder that the HSE has a specific guidelines regarding working in a confined space.

The legislation states that every employer or self-employed person must ensure compliance with the regulations and the only way to do this is to make sure that those working in the environment understand the regulations and can recognise the risks involved in work of this nature. The issue with a large company is that you may not always be present to oversee the work, which is why a good education for your staff members is crucial – this is where construction training comes into the fray.

The confined space training course is one which is popular in the construction training category. On average, there are 15 fatalities each year following work in a confined space, and by ensuring that the HSE regulations are abided by, and that each and every worker, manager and supervisor is aware of their duties and how they should work this figure can hopefully be reduced.

A Construction Training Confined Space Course allows employers to ensure they are working within legislation guidelines, ensuring that their staff are trained in the risks which they may face when working in this environment. The courses are thorough and cover all elements from the definition of a confined space, to safe systems of work, how to identify hazards to safety equipment and form emergency procedures to access. You’ll usually find that there will be a short test at the end of the training session which is proof that you have digested and understood the information given to you.  It is also worth noting that there are different courses for the varying staff levels – from worker all the way up to site supervisors, as each has a different type of responsibility when working onsite.

Bio: Rebecca Field is writing on behalf of Britannia Safety and Training, a company offering construction training near Norwich in Norfolk, UK. Their industry experienced experts and purpose built training facility are designed to make your construction training course experience the best you can wish for. Visit their website here: http://www.britanniaits.com/  to find out more.

Thanks, Rebecca, for sharing this important information with us.  OSHA also has the same description and regulations for persons workin in confined spaces.  There should always be someone present watching workers in case of emergency, and those workers should have the proper personal protective equipment, such as respirators, hardhats, and other safety items. 

EIGHT DANGERS DRIVERS FACE IN THE SUMMER (GUEST POST)

The arrival of the summer months conjures up images of time spent on the beach, late evenings enjoying the sunset and road trips with family and friends. However, the summer months can also be filled with threats. The arrival of warm weather means much more than the end of the school year and the arrival of summer vacation. Here are 8 things that you need to be aware of if you’ll be driving in the heat. 

1. Heat Kills Batteries

While winter temperatures kill more batteries, high heat can be a serious threat, particularly if your battery is on its last legs anyway. Before summer truly sets in, take your car in for a full charging system test to make sure that your battery, starter and alternator are in good shape. 

2. Tire Condition

The tires on your car are immensely important, though they’re probably one of the last things teen drivers really think about. High heat on asphalt can lead to some serious issues, especially if you’re tooling around on “may-pops”. If your tires are looking a little worse for wear, replace them before the heat gets too high. 

3. Tire Pressure

In addition to tire condition, you need to pay close attention to your tire pressure. Hot temperatures can actually increase your tire pressure substantially. That just increases when you hit the asphalt. Too much tire pressure can cause a blowout on the road, so make sure you keep a close eye on your tire pressure all summer long. 

4. Engine Overheating

Summer heat can do a number on everything, including your car’s engine. This is particularly true if you’re running your air conditioner (using the AC heats up your engine more). Make sure to have a full cooling system check done before the heat sets in for good, and if your engine does overheat, pull over and let it cool down before you do anything. 

5. Wildlife

Summer means more cars on the road, but it also means an increased chance of having an animal encounter. Deer are perhaps the most obvious animals you might encounter when driving, but there are many others depending on where you live. Be observant at all times because animals are much more active during the warmer months and an encounter with one can be fatal (for you and the animal). 

6. Summer Storms

Summer thunderstorms are a reality in most places. Drivers should be extremely wary of driving during severe weather. The chances of hydroplaning, driving in high winds, combatting hail and no visibility due to very heavy rain all make summer driving more dangerous. 

7. Beware the Interior

As the sun climbs the sky, temperatures rise higher and higher. While you might be well aware of the dangers of being unprotected outdoors in the high heat, it’s important to understand that your car’s interior is an even more dangerous place, especially for younger siblings and pets. Never, ever leave a pet or a sibling in the car during the summer, not even with the windows cracked. 

8. A False Sense of Security

“The lazy days of summer” should be just that – days filled with relaxation and enjoyment. However, that can lead to a false sense of security when on the road. Do not let the “summer feel” lull you into being unobservant or overconfident. Always pay full attention to what you’re doing. 

Following these simple tips will help ensure that you stay safe while on the road this summer, and avoid potentially deadly situations behind the wheel.

Don Elfrink is the owner and operator of AutoMatStore, an auto flooring company based out Columbia, Missouri. Before AutoMatStore, Elfrink was the operator of a automotive production site. AutoMatStore focuses on all-weather, logo, carpeted and molded car mats.  Again, thanks, Don, for the great information you sent us! pb