Tag Archives: inside

General Safety Issues

HOW TO PROTECT YOUR HOME FROM THE INSIDE OUT (GUEST POST)

Protecting Your Home From the Inside Out

It becomes more evident every day that the world can be an unstable place. The uncertainty of tomorrow can be frightening, but there are many measures you can take to improve the safety conditions of your life. There are many unfortunate events that could happen around your home, but taking the right precautions can help to keep you and your family as safe as possible.

Keep All Weapons Locked Away Safely

The number of accidents caused from inside the home due to improperly stored weapons is unnecessarily high and growing every day. If you are a gun owner, it would be wise to consider investing in a gun locker, especially if there are children around. Locking up your weapons securely and safely can help to eliminate the chance of them falling into the wrong hands, and many safety experts also recommend keeping the keys on you at all times as well as locking up the ammunition separate from the weapon.

Reduce Fire Hazards in the Home

Home fires can be devastating and extremely dangerous, but fortunately, fires are another type of accident that can be prevented when the right precautions are taken. First off, clear any dust around heat vents and electrical outlets as dust can clog outlets and combust with the right amount of heat. It’s very important to keep your electrical outlets up to date as well; if the outlets have trouble holding a cord in their socket, it’s time to replace them. Also, make sure to keep an eye on the cords of your electrical appliances, and stop using them once they become frayed or thin. 

Never turn your back when you’re cooking something on the stove or in the toaster, and always double check to make sure the oven has been turned off.

Avoid placing something flammable near a flame. Candles should never be near any fabric, and it’s a good idea to blow out a candle if you’re planning on leaving the room for more than a few minutes. If you’re a smoker, always make sure that you put your cigarette completely out before leaving it unattended.

Keep All Entries Locked

This one might seem obvious, but it’s amazing how many people leave their doors unlocked even while they’re away. Don’t allow intruders to have easy access to anything. Make sure all doors, garages, and windows (windows are the easiest to forget) are shut and locked, and always double-check that everything is sealed up before you leave the house or go to bed. Also, use two locks on each door to prevent lock picking.

Secure Your Home with Lights

No criminal wants to be in the spotlight when committing any illegal acts. If you surround your home with bright LED lights, you are at least making a statement to any future intruders that you have taken a precaution to eliminate their ability to blend into the night. Motion sensory lights are a cost effective form of home security due to the fact that they do not stay on all night and run up your energy bill like other outdoor lights.

Leaving on a visible house light is a common practice to make it look like there is someone home. To save on the electric bill, you might want to consider purchasing an electronic timer that can turn your lights on and off automatically after being set to a certain time. This will save you money and make it more believable that someone is inside.

Invest in a Home Alarm System

Home alarm systems don’t mean what they used to; they don’t have to involve complex wiring through your walls. In fact, there are many fairly priced and easy-to-use wireless home alarm systems out there that can fit any budget or home. A more advanced system would clearly be the best bet, but any alarm system in your price range would help to tighten the security of your home.

Create a buddy system with your neighbors

Creating good bonds with your neighbors is great for security strength. When you know the people in the homes around you, they are more likely to notice suspicious activity and are more likely to let you know if they see something questionable.

Install a mail slot in your door

This is a good way to prevent mail and identity theft. Mail boxes are wide open, and anybody could walk by and open up your mailbox. With a private slot, your mail goes right into your (hopefully) locked door.

Home is where the heart is; it’s also where your family and valuables are. There are many ways to tighten the security of your home, so you can keep it a place where comfort and safety are felt and good memories flourish.

James Anderson is a sports enthusiast, survivalist and blogger born and raised in West Virginia. He writes about secure storage for school lockers.   

 

Eye Protection, General Safety Issues, Head Protection

INSIDE THE UPS AND DOWNS OF ELECTRICAL HAZARDS

Today’s guest post is sent to us by Jack Rubinger, www.duralabel.com/.  Working around electricity can be very dangerous, so pay attention to these excellent safety tips from Jack:

Look up!

Electrical hazards are overhead. Live wires run dangerously close to cranes, drilling rigs, backhoes, dump trucks and tree trimmers.Electrical hazards are the second leading cause of deaths in the construction industry, killing an average of 143 construction workers each year, according to The Center for Construction Research and Training.

Isn’t it time for a renewed call for visible cues to warn us of electrical hazard dangers from up high, down low and both inside and outside our facilities? New sign and label materials will hold up for years in all kinds of weather conditions – making them ideal for electrical hazards which may occur in facilities and outdoors. A new puncture-proof, water-proof and mildew resistant fabric-like stock is made to survive extreme outdoor and indoor conditions.  Proper labeling doesn’t just save time and money, it saves lives.  Accidental contact of overhead electrical power lines by mobile equipment is a leading cause of occupational fatalities in the United States, accounting for 20% of on-the-job electrocutions, reported the National Institute for Occupational Safety and Health.  Many safety rules and regulations have been established to protect those facing the greatest risks from electrical hazards.

The American National Standards Institute (ANSI) has standards for mobile and locomotive cranes that include operation near overhead power lines and tree care operations that provide safety requirements. Standards address the following issues:

  • Consider any overhead wire to be energized unless and until the person owning the line or the utility authorities verify that the line is not energized.
  • De-energize power lines before work begins, erect insulated barriers to prevent physical contact with the energized lines, or maintain safe clearance between the energized lines and boomed equipment.
  • Notify line owners before work is performed near power lines.
  • Post warnings on cranes cautioning the operators to maintain safe clearance between energized power lines and their equipment.
  • Review common electrical hazard safety signs and pay attention to important OSHA/ANSI safety codes, standards and regulations.

Make sure to use the appropriate colors, formats and designs as outlined in OSHA §1910.145. Signs used to identify safety issues should be designed in a specified format to comply.

Look down!

Buried or partially exposed power lines are especially hazardous because they carry extremely high voltage. Check work areas for other forms of electrical equipment including street lights and traffic lights – indicators that underground power lines will be present. Look out for sand, plastic strips or specially marked bricks when excavating, which signal the presence of underground power lines. Plans and maps identifying the location of underground cables can date quickly and underground depths can alter road upgrades or developments. The depth of underground cables vary from site to site or even on the same property. Underground cables should never be moved or relocated unless authorized. Below are tasks that expose workers to underground power lines.

  • A plumber cutting a water pipe when there could be an electric cable next to the pipe.
  • A fencing contractor digging holes where an electric cable could be buried.
  • Construction site excavation.
  • Jackhammers.
  • Well drilling.
  • Landscaping.
  • Trenching for pipes.

Look inside!

Perform an electrical hazard analysis to review what types of hazards develop in a plant. Look for oil and grease or debris that dissolve or damage insulated cables. Watch out for loose wires that cause electrical shorts and unguarded temporary lights that are exposed to energized parts. Use the guidelines in NFPA 70E and IEEE 1584 to identify and assess electrical shock and risks throughout your facility.

Arc Flash and Solar Panel – Other Electrical Hazards

An arc flash occurs when an electrical short-circuit produces a high-energy, high-temperature explosion. These occurrences are known to propel molten metal and other dangerous debris through the air. Explosions of this nature can damage a person’s eyesight, hearing and cause severe burning or death. For more information about extremely hazardous electrical Arc Flash dangers, visit www.arcflash.me.

Whether the electrical hazard is found indoors, outdoors, far above our heads or buried deep beneath the ground, these hazards need prominent visibility to ensure safe conditions for those who work with or near power lines, tools and construction vehicles. To warn other employees in the facility of the potential hazard, remember to place signs in the area of live repairs being performed. Compliance with sign and label regulations is an important step in the right direction. Protect your workforce by marking electrical hazards clearly.

Thank you, Jack, for this article emphasizing the importance of playing it safe around electricity.  As he advises, look up, down, and all around to be sure you are not digging or working near electrical hazards!  Texas America Safety, www.tasco-safety.com, has special safety glasses that feature a special dielectric hinge design with no metal parts.  Also, there are special hardhats that are built for use by utility companies and other industries where head protection with dielectric protection is necessary.  Many specialized personal protective products that do not conduct electricity can be found on our site.