Tag Archives: power down

SAFETY TIPS FOR A DIY HANDYMAN (GUEST POST)

 

Almost all handyman jobs involve risks and this is why it is important to ensure safety on the service site. Read on for some useful safety tips that’ll help you prevent injuries while working.

Since most handyman services involve lots of hazards, working without the right safety equipment and moving around carelessly can lead to serious injuries. When grinding or welding without goggles, for instance, you’ll obviously end up getting metal particles in your eyes. So, why close the eyes to handy, hi-tech safety measures and equipment when they are easily available and invite plenty of risks!

Here are practical safety tips that are basically lessons learned by our handymen from their mistakes in the past:

1.Pressure Washers Can Peel Your Skin

Pressure washers are the most common handyman tools used to clean up areas like the patio and roof of a building. Since handymen get their attention diverted by a variety of stimuli in the open, they often make the mistake of holding the pressure washer and operating the trigger with only one hand. This can cause the spray wand to move across your hand, peeling the skin off.

It is important that as a professional, you understand and respect the power of water, especially when it is pressurized for cleaning the concrete etc. 

2. Bump-Nailing Can Nail Your Feet

The use of a framing nailer for fastening plywood to joints is a common practice for handymen. But when the nailer is set in bump mode, you need to be fully attentive, for forgetting to pushing the nose of the gun properly against the wood can lead to serious injuries. The worst, you may bump the nose of the gun at the wrong spot such as one of your own feet! Make sure you’ve properly bumped the gun-point on the target area before you pull the trigger. 

3. Safety against Electric Shocks is Important

One of the most important safety steps at a repair site is to check electricity wires using a non-contact tester before laying a hand on them. Commonly, handymen take off the fuse in a hurry and start disconnecting the wires from outlets. There maybe two circuits linked to the outlet, of which you have turned off only one. So, when you touch the wires barehanded, you’ll get knocked back by a powerful shove of electricity shooting up your entire body!

When performing such a job, don’t forget to test and double-check the wires with a tester. 

4. Sheet Metal Can Slice Your Body Parts 

Drilling holes in pieces of metals is another common handyman duty involving a great deal of risk. Handymen are often in a rush and don’t take time to compress the metal to a table etc. This can cause the drill to be caught by the sheet and thrown onto you, creating a deep rip on one of your body parts.

Before you start to drill a hole on a metal sheet, clamp it to a table and adjust your hand and the drill well.

 

Author Bio:

Dan Kogan is the owner of Handyman at your service which is a US based company providing Handyman Services to business owners at an affordable price. Handyman at your service specializing in TV installation NYC, Electrical work, Plumbing NYC, IKEA Assembly NYC and many more.