Tag Archives: proper training

WORKING FROM HEIGHT, ARE YOU DOING IT RIGHT? (GUEST POST)

Working at height is a common requisite of almost any construction, maintenance or development work and should be conducted with extra care. According to the Health & Safety Executive (HSE), falls from height remain one of the most common causes of fatality in any workplace, with a large proportion of these being a result of proper checks and basic assessments having not been carried out.

If you are an employer running your own business where working at height is frequent, it is crucial that you are familiar with the Working At Height Regulations 2005 and that you are continuously implementing the right health and safety protocol within your work site. If you are an employee, it’s important to be aware of the necessary safety checks so you can be sure you are not putting yourself in danger whilst at work. 

1.     Assess the work to be done.

Thorough and practical assessment of the work to be carried out will allow the work to be controlled responsibly throughout, minimising the likelihood of setbacks or emergencies.

It is stressed by the HSE that work should be done at height only when absolutely necessary. Ask yourself: can this work be done from the ground, with specialised equipment? Or can it be done using lower-level or interval platforms, reducing the risk of fall or injury?

Also identify the risks themselves, including the height of the work to be done, and how realistically accessible it is, even with the use of elevated platforms and other equipment. Determine how many people are required to complete the work, so as not to compromise the safety of more than what is absolutely necessary. Decide whether the work to be done is of a long or short duration (short duration is work that is measured in minutes rather than hours). 

2.     Take note of environmental conditions.

Work at height should never be undertaken or allowed in extreme weather conditions that could endanger anybody’s health and safety. Also bear in mind the surrounding environment of your work site, such as a noisy environment that could affect communications between those working at height and those co-ordinating on the ground. Nearby unstable matter can also pose an extra risk of injury, distraction or obstruction, so it’s important to maintain the worksite and its surrounding area to as high a standard as possible.

Although environmental conditions very often cannot be controlled, they can be noted and prepared for accordingly. 

3.     Check the relevant equipment.

Use of the right equipment is obviously the backbone of any work being carried out at height; whether this involves ladders, scaffolding, or the use of mobile elevated work platforms (MEWPS) such as scissor lifts or cherry pickers.

What should not be overlooked, however, is the checking and maintenance of this equipment on a regular basis. Different equipment and machinery will have various maintenance specifications; scaffolding checks for example, ought to be carried every seven days, whilst harnesses require a pre-use check, detailed inspection and interim inspection at various stages of their lifetime.

Equipment checks should ideally be carried out by someone assessed under a registry body (such as the Construction Industry Scaffolders Registration Scheme), or at least with sufficient experience in the use of the height equipment being used. 

4.     Ensure employees have the right training.

In light of the previous point, anybody using specific height equipment should have had the right training in its operation – this is essential. If your business engages in the use of mobile elevated platforms, it is absolutely crucial that all employees have undergone IPAF training and hold a current Powered Access Licence card (PAL) that proves they are capable of operating MEWPs safely.

IPAF training can be carried out by an IPAF approved training provider, and courses can be completed in just one day, with different packages to suit your business’ needs. If you are an employee, speak to your employer about possibly setting up a course to secure a fully qualified workforce (and some excellent team building opportunities). 

5.     Prepare for the worst.

It sounds simple, but the law requires that there is always a plan in place for emergencies and rescues when working at height. Use all means possible to minimise the distance and consequences of a fall should one occur, such as safety nets or bean bags; rest platforms at regular intervals, and the wear of safety clothing.
Adele Hallsall writes for Kimberly Access, which provide access platform equipment for construction jobs. They have been serving businesses with access equipment for many years now and have a loyal customer base. They also provide training such as IPAF training.

Why Being A Lifeguard Is More Than Just A Name (Guest Post)

We love to think that being a lifeguard is just a name, and it has nothing to do with anything else other than the pool management. But if you think being a lifeguard is all about a teen in high school who is smeared with SPF 30 and stretching out in a chair, and all this lifeguard does is just double-checking on drowning children, you are totally wrong. This is because lifeguard is not just a useless title of a job. It has all the characteristics of being important. It’s a tough job, but yes, someone has to do it. 

So, you’ve finally decided that you want to make a career out of it, and you know you are proud to be called as a lifeguard? The thing is that you have to know that deep inside your heart; this is what you want. That is why we would like to tell you the importance of being a lifeguard. You are not just defending your own safety because every day when you go to work you are expecting the unexpected. That is why it is very crucial for someone who desires to become a lifeguard to go for a lifeguard training. The number one role of a lifeguard is to ensure that every swimmer at pools and public beaches have a safe environment. Lifeguards are advanced swimmers who are trained through swimming programs especially under International Lifeguard Training Program (ILTP). 

If you desire a job where you can make a difference every day and is full of challenges, the first thing you need to do is to apply for a lifeguard training with Jeff Ellis Management or with any other certified swimming programs. You will be trained about anything related to safety and rescue, public beaches and pool management, and your routine role as a lifeguard in monitoring all activities in the water. Other than that, you will also learn that instead of watching people from faraway, you will still need to interact with them by teaching swimming lessons and the safety rules.

Lifeguard1

Lifeguards are trained to be completely calm especially when it involves emergency rescue procedures. They are not just excellent swimmers; they are lifesavers. That is why you can see that whenever there’s an emergency where a swimmer is cramping, fatigued, injured, or at risk for any other unknown reasons, a lifeguard will dive into the water to save the swimmer. In some cases where it takes time for paramedics to arrive, a lifeguard will be the one performing the on-site emergency response. All of these are impossible to be performed if a lifeguard did not go through  lifeguard training. It also take a lot of confidence for a lifeguard to be able to do an evacuation and make a huge announcement should the place of recreation is not safe for public. 

Being a lifeguard is more than just getting the worst tan lines ever, or to smell like chlorine once you get back home. It’s about a commitment toward a responsibility of ensuring one’s life is secured while you’re on duty. If anything happens, you will be asked about it, and that is why getting the proper training will give you an insight of what exactly a public beach or pool management is. Since every day when you go to that same swimming pool or public beach, you get the chance to become the hero of the day. Does it sound interesting to you?

Note: We want to thank Mickey Colon of jeffellismanagement.com for this insight into exactly what it takes to become a lifeguard.  People who choose this profession will not only be working on the beaches, but protecting swimmers in college pools, city pools, and recreational centers.  It takes someone who can pay attention for hours to everything going on in and around the pool.  It does seem glamorous, but it is a very important job.  Knowing CPR and having the appropriate first aid equipment plays a huge part in saving lives.  pb

WORKING FROM HEIGHTS: SAFETY REQUIREMENTS TO ADHERE TO WHEN ROOFING (GUEST POST)

Any roofing job has an element of risk involved. With one in five deaths within the construction industry being attributed to roof work, precautions have to be taken to ensure the safety of both staff members and the general public.

Before any work is undertaken, a full risk assessment should be carried out. It is a legal requirement that all work at height is extensively planned. Workers should be sufficiently trained for the task which they are about to undertake. A method statement is the most common way of organising and controlling roof work.  Contractors should liaise closely with the client in order to make arrangements about the work.

The most common cause of accidents, both fatal and nonfatal, when it comes to roof work are falls from roof edges or openings. The majority of accidents could be avoided if the person undertaking the work were:

Properly trained – Properly equipped – Properly supervised

It is important that the work area can be accessed safely and easily. All access points, be they scaffolds, ladders or otherwise, must be attached securely. For both sloping and flat roof projects, edge protection must be fitted to prevent accidents due to people or objects falling.

Working on fragile roofs means a lot more precautions have to be taken. All work surfaces should be assumed to be fragile until a competent professional has declared them safe.  Any roof made from sheet material should not be trusted to bear a worker’s weight.  When working on a fragile surface, fall arrest devices such as harnesses should be used to ensure workers’ safety.

The area surrounding the building you are working on should be cordoned off to make sure no members of the public are hit by falling debris. If it isn’t feasible to clear the area then other measures, such as suspended nets or guard railing should be installed for the duration of the work.

Working at height can be dangerous and as a result it is important that all the correct steps are taken and workers strictly adhere to safety policies.

Does anyone have anything else to add in regard to roof safety?

This piece was written by Mark Enright, a writer for http://www.beddardroofing.co.uk/Beddard Roofing specialist contractors.

SAFETY TIPS EVERY TRADESMAN SHOULD KNOW WHEN WORKING WITH ELECTRICITY (GUEST POST)

 

As many of you may know, working with electricity does have its risks and tradesmen working with the hidden dangers of household and industrial electricity on a daily basis should be on their guard, exercising safety and caution at every turn. According to a recent survey by Electrical Safety Foundation International (ESFI) in the past decade 46,000 workers have been injured on the job by industrial electrical hazards, but what can you do to ensure you don’t form part of this statistic?

Check out the following four safety tips for industrial professionals to ensure they get through their working day safely and without encountering all-too-common hazards and resulting electricity-related accidents…

Never Assume Safety

Forgetting the basics of electrical safety, whether working with industrial alkaline batteries on a small installation or live conductors at a large scale manufacturing plant, results in the majority of injuries, such as electrocution, electric shocks, burns and falls. Never assume that an electrical component you are handling is safe, always run the necessary checks to ensure that the component you are working with is free from hazards before starting your project.

Know the Warning Signs

The second part of the ‘never assume safety’ rule is knowing how to confidently determine the warning signs and dangers that come with electricity and electrical components. If you are unsure about how to identify these hazards, then get clued up before you take on the project with professional training and assistance from a more qualified industry expert. After all, even if you have experience working with household voltages, this does not mean that you can work safely with commercial or industrial application voltages.

Use the Right Safety Equipment

As well as using your industry knowledge to identify the warning signs of electrical safety, it is also necessary to know what type of safety equipment is appropriate when dealing with electrical faults, devices, panels and other equipment to avoid serious injury. Always wear the appropriate safety gear; safety glasses, ear protectors, gloves, dust masks and rubber soled shoes are all essential accessories for completing an electrical project.

Test, Test and Test Again

Testing all electrical components before you start work is also an important step in electrical safety and testing should be completed thoroughly before checking whether a device is even on or off, or industrial batteries are energised. A non-contact voltage tester is every electrician’s best friend so make it yours; this handy tester can pinpoint whether a circuit is on before you even touch the switch or remove the panel to view its internal wires. Keep up to date with the latest electrical safety equipment and see the risk of electrical injury diminish!

Bio: Brittany is from Steatite Batteries, a market leading supplier of industrial technology solutions. Using over 75 years of experience, Steatite design and manufacture custom battery packs and industrial alkaline batteries.