Tag Archives: safety vests

SAFETY VESTS AREN’T JUST FOR CONSTRUCTION WORKERS (GUEST POST)

Safety vests are familiar sights in construction zones. A variety of reflective models, including lightweight, mesh and multi-colored versions, help workers increase their visibility and maintain on-the-job safety every day. While construction workers may first come to mind when thoughts turn to safety vests, this critical protective gear is also used in a number of other industries and activities.

On the Road
Between the ongoing need for highway infrastructure improvements and increased traffic construction due to population growth, night work is becoming increasingly prevalent on the roadways. While contact with construction vehicles, objects and equipment is the leading cause of death for workers in highway construction zones, these fatalities are preventable through the implementation of best safety practices, including safety vests.

Safety Vests Arent Just For Construction Workers 1

Whatever their shape and size, safety gear cannot be underestimated.

According to the National Safety Council’s 2011 Injury Facts report, there were just under 700 deaths and 29,000 work zone crashes in a single year period. Safety vests reduce traffic fatalities by helping drivers more easily see workers during the evening hours, when visibility is significantly impaired.

But it’s not just construction workers who are injured or killed on the highway. Traffic flaggers, as well as first responders, such as police officers, EMTs and firefighters, rely on safety vests for road safety. Additionally, federal regulations now require media personnel to don safety vests when working on federal rights-of-way because of struck-by accidents. Airline and traffic controllers don safety vests for the same important reason.

Emergency Situations
Police officers, security guards and other public officers face many hazards every day. Personal safety is a critical imperative, and safety vests are a critical component. Reflective safety vests help law enforcement personnel, as well as security and patrol officers, identify their presence during emergency situations, which can help protect them and prevent catastrophic accidents.

Safety Vests Arent Just For Construction Workers 2

You can’t see very well. The driver can’t either.

For the Sport of It
Safety vests aren’t just for members of the workforce. In fact, they are a valuable precautionary method for a number of different sports enthusiasts, including cyclists and joggers, who may otherwise be unseen by passing cars. Motorists aren’t the sole threat to humans, however: the majority of states require game hunters to don safety vests for increased visibility to other hunters. In fact, wearing a blaze orange reflective vest during game season has the potential to save lives, and areas which enforce blaze orange safety requirements have seen reductions in hunting accidents.

While a safety vest is just a safety vest to some people, it’s an invaluable safety precaution for others at work and at play. Many construction industry insurance policies prioritize their use, as does OSHA for flaggers and other workers in construction zones. In short, safety vests are a critical partner in increasing safety, reducing accidents and enhancing peace of mind for many members of society.

Joanna Hughes writes on all subjects, ranging from lifestyle to workplace safety.

WHEN DO I NEED SAFETY WEAR, AND WHAT DO I NEED? (GUEST POST)

Safety wear is used to protect you in work environments but to the majority, it becomes part of the uniform and we forget its benefits. This article is going to give you a run down of what you need and when you might need it.

Labouring jobs and outdoor jobs are perhaps the most obvious occupations in which workwear is required. When you are working in a building environment for example, there is a risk with carrying heavy goods in case you dropped  something on your toe. When your work outdoors, perhaps doing road works, there is a risk in foggy or dark conditions with your lack of visibility. Hazards exist everywhere you look but jobs, like the ones described, carry a higher risk. This is why you need safety wear. Safety wear decreases the chance of accidents and injuries.

But what is needed and why?

First of all let’s start with what is available.

  • Socks with extra cushioning so you can feel comfortable while wearing safety boots.
  • Safety boots – most contain steel toe caps to protect your toes and you should look for ones with anti-slip surfaces to ensure you remain steady on your feet.
  • Work trousers – containing durable material, knee pads and lots of pockets.
  • Safety gloves – to protect your hands.
  • Safety goggles – your eyes are the most precious part of your body and although goggles might look unattractive, it is worth it to save your vision.
  • High Visibility clothing. Vests and jackets help you stay noticed in unclear conditions.
  • Knee pads – knees are weak parts of the body and the extra padding can be crucial if your spending a lot of time knelt down on the floor during your job. It is all about making you comfortable.
  • Hard hats with cushioning to protect your head and brain are very important.

Who needs what though?

Well,  if you are in a labouring environment, it depends. 
Builders will more than likely require steel toe work boots in case any materials are dropped while doing the job. They also require hard hats and gloves are a must have, particularly if working outdoors in blustering conditions.
Mechanics need work trousers and knee pads. When they are knelt on the ground and under vehicles, comfort is essential and these must-haves are necessary to protect your knees.
Welders require safety goggles. This is a dangerous job and your eyes are the most sensitive part of your body. They are critical safety products.

If you are outdoors, maybe working on the roads as a traffic officer or as an highway operative, you need to ensure you stand out and people can see you. This is not always easy when the weather conditions are poor or even when it is dark; this is why your role requires high visibility clothing. Hi-vis jackets and vests come in fluorescent designs and contain extra reflective strips to ensure you are noticeable and in turn accidents are avoided. Jackets come in a variety of styles so if you are working in the cold, you can opt for a fleece lined parka that will keep you warm but also safe and secure.
Emergency services also wear hi-vis clothing to ensure they are apparent and people recognise them easily; this is particularly important for crucial situations.

Most workers require some sort of safety uniform but for occupations outdoors or in labouring environments, a specialised range of safety wear has been deigned to decrease any unexpected risks. It is very important and statistics suggest you need these items. Take a look at our range of workwear here http://www.sportsdirect.com/pages/workwear and stay safe!

 

 

 

WHAT’S NEW IN THE WORLD OF SAFETY VESTS?

From time to time, I like to stroll (actually drive) over to headquarters in Brownwood, Texas, to check out the latest safety gear, so I can mention it in case you haven’t spotted it on our http://www.tasco-safety.com/ website!

For the many workers who must wear safety vests all day long, there is an abundance of hi-visibility ones with logos already on them, such as Think Safety”,  (which happens to be on sale right now).  Check out the new black vests – many law enforcement officers prefer to wear black, and these can have any logos or names imprinted right in our own facility!

There are “cool” hot pink vests for the girls, and even white, with hot pink stripes.  The white appear to be a cool choice.  For girls with an attitude, we offer a black vest with hot pink stripes!

For more info, this comes straight from our website:

We carry inexpensive vests such as the plain soft mesh version, surveyor’s safety vests, ANSI Traffic Safety Vests, and also company imprinted safety vests. We are offering from SM to 5X sizing, both solid materials and mesh materials; as well as, many different reflective stripe combinations. We also carry the standard Orange and Lime colors in most designs, and we recently introduced special color identification vests including Pink, Royal Blue, ANSI Red, Black, Green, White and more. Whether on the jobsite, in a traffic area, or on a busy roadside we have the perfect safety vest for you.

For those who work in extremely hot weather, we carry a body cooling vest that will help you keep your cool.  Golfers, yard workers, and others who are out in the heat would probably love them, too! 

While you are browsing, don’t forget to take a look at our similar high visibility safety product pages. This section offers high visibility clothing from head to toe.  If you purchase an item, please remember to mention that you read about it on the blog so you can receive a 5% discount!  Thanks for reading my little commercial.  We want you to be safe, seen, and cool this summer.

 

 

 

 

 

 

 

 

HARD HATS – WHEN DO YOU WEAR THEM? (Guest Post)

Some construction workers will tell you that the hard hat is one of hardest things to keep on your head but they are a necessary part of safety.  When you are on the ground and someone is working above you there is always a chance of something hitting you from above. Two of our construction workers were finishing out their day and they were lowering the buckets of tools down from a swing stage to the ground.  One of the buckets of tools flipped over while being lowered to the ground and one of tools flew out.  It did not hit the worker that was on the ground, it was, what we would call a near miss, but the hard hat would have been her protection if it had been any closer.  Why take that chance?
 
When working on roadways, on boulevards, or in ditches, the Safety hard hat is the first thing others will see when driving past. The hard hat identifies that work is going on and tells motorists to slow down.  Of course the safety vest is also to be worn on these types of jobs. It is also a crucial part of identifying the construction worker.  Even the supervisor has to wear a hard hat and a safety vest when going on the job site to set a good example. 
 
Several years ago, before a lot of the safety rules which are in place now, a supervisor on a job site had his hard hat save his life in a very unusual way.    That supervisor was my Dad.  He was always in the site trailer doing his job but on this particular day he had been called out to the job site where  work was in progress.  Like always as leaving the trailer, he grabbed his hard hat and put it on.  When he got to the work site, one of the workers who had been causing problems and been warned before, was again causing havoc on the job.  He had no choice but to fire him.  After solving the problem, my Dad started walking back to his site trailer but still oddly enough kept his hard hat on.   The worker that had just been fired came up behind him with a small sledge hammer in hand and hit my Dad on the head.  His hard hat saved him from a major head injury and as I said before, possibly his life.  Mind you, my Dad had a pretty hard head.   The company he worked for at the time awarded him the golden hard hat award for his safety diligence.
 
Moral of this story is:  When on a job site, wear your hard hat all the time.  This includes workers, foreman, supervisors, safety officers and any visitors to the site.  You never know what is going to happen.  When attending one of our job sites you must have a hard hat, steel toed boots and safety vest where warranted.  Where is that?  Everywhere, you are on our jobsites.  As you can tell, I was taught these rules early in life.  As a child if I visited my Dad’s sites, you had to have steel toed boots on your feet and a hard hat on your head, to go anywhere on one of his sites.   Remember this was before there was a Safety Association to tell us the right way, or any kind of safety rules like there are in place today.  It was called common sense, and that is what safety is.
Susan Schwabl
nascon.ca
safetyequipment.shopbuynenjoy.com/
770-7478

HELPFUL INFORMATION ABOUT SAFETY VESTS

A very important component of Personal Protective Equipment (PPE) is the safety vest, or surveyors vest.  Just about anywhere you go, you will see all types of workers wearing safety vests.  These vests play an important role to ensure that workers are more visible, especially in traffic areas.  There are several things to consider when purchasing safety vests. 

In your search for traffic safety vests, it’s likely you have come across products called A.N.S.I. Surveyor Vests.  ANSI stands for the American National Standards Institute.  ANSI, founded in 1918, is the voice of U.S. Standards and conformity assessment system.  The official U.S. representative to the International Standard Organization, the main mission of ANSI is to help along operational and business standards that allow the United States to become competitive in the global market.  OSHA identifies rules and regulations for all types of workplace vests, including fire safety vests, traffic vests, and vests worn by law enforcement.  It should be noted that ANSI does not directly set standards, but OSHA normally uses ANSI data, after both institutions have fully done their own testing.  OSHA also analyzes volumes of data regarding workplace safety and PPE.  In the protective equipment area, however, OSHA most often takes ANSI standards and uses them as their own.  Because ANSI safety vests are approved with a high standard that meets both reflective and observed visibility minimums, OSHA will also recommend that ANSI approved vests promote worksite safety and accident avoidance. 

Colors and Materials of Vests

 Non-ANSI approved traffic safety vests are used in Class 1, for low traffic areas (such as parking lot attendants.)  Most popular colors are orange, yellow, and lime green.  Class 2 (ANSI approved) traffic safety vests are used by workers where traffic speeds are usually 25 mph or less.  These vests are orange, yellow, or lime green.  Class 3 (ANSI approved) traffic safety (speeds in excess of 50 mph) vests must be the same colors for Class 2 and 3 ANSI safety vests, using highly reflective material, which can also be worn for nigh work.  Night work greatly increases potential hazards, meaning their vests should have reflective strips for high visibility.  There is also another, the LED safety vest, that lights up while working at night. 

Typical safety and surveyors vests are made up of mesh and solid materials.  Mesh furnishes a cooler vest in warm weather.  Some vests are made of mirror-like material that shines at night when exposed to a light source.  The vests also have different types of stripes on them, which adds to their visibility. 

Surveyors vests contain many more pockets than safety vests.  There are pockets both inside and outside the vests, as surveyors have to carry many small instruments, measuring tape, and other small tools, so the pockets are a necessary part of the vest.  Another type of vest is the Incident Command Vest.  These are different colors, such as navy, red, or black, and are used by law enforcement, EMS, and firemen.  These vests have a place for an identifying badge, or can be imprinted with professional identification. 

These days, people are staying out longer during the days and evenings, such as those who enjoy riding bicycles, jogging or running.  Safety vests are an ideal way for them to be seen, as well.  Safety products for work for athletes because they are sleek and not bulky, and are intended to keep citizens safe, too, as well as those who wear them to work each day.  Another good idea is to purchase some reflective strips for your children’s bikes, to help them be more visible to drivers.

Source: Life Tips, (Texas America Safety Company), OSHA

HIGH VISIBILITY SAFETY VESTS- Part I

In January, 2006, the Federal Highway Administration published the most recent Manual of Uniform Traffic Control Devices (The MUJTCD.)  This MUJTCD revision accepted and coded into law for the first time the ANSI 107-1999 High Visibility Apparel Standard.  The acceptance of the ANSI 107-2004 Standard (current revision) was a distinct advancement for highway workers.

For Public Safety Workers such as Fire, Police, State Patrol, Emergency Personnel, and other First Responders, however, the circumstances and use of High Visibility Apparel on the job was unclear.  Many Public Safety workers were exempted from using high visibility apparel, and were only partially covered by the ANSI 107 standard and the MUTCD.  In 2006, the FHWA announced that effective in 2006, ALL workers working on a highway that received federal funds must wear high visibility ANSI apparel.  The new rule now included Public Safety personnel, such as those named above, as they are a part of directing traffic, investigating crashes, handling lane closures, clearing obstructed roadways, and all other disasters within the right of way of federal highways.  All First Responders working on any highway that received federal funds were being advised to use ANSI High Visibility Apparel.  The vests must be Class 2 or Class 3.

There was the concern by Public Safety Workers that completing hazardous work such as heat/flame exposure, use of weapons and fire/chemical/electrical exposure, are all part of the risks of on-the-job traffic accidents and required judgment in the use of High Visibility apparel, and flexibility of design for these workers.

The ISEA, working in conjunction with select law enforcement, fire, rescue, EMS, and other city and state First Responder organizations began work on a new consensus standard specifically for Public Service Safety Vests.  The result was the publication of the ANSI 207 Public Safety Vest standard, approved by canvas method and published in late 2006, and it is hoped that the regulation will soon be amended, as the 207 is not intended to be interchangeable or replace the 107.   The ANSI 207-2006 accepted as “Best Practices” much of this standard as defined by the already published ANSI 107-2004 for workers.  In regard to definitions of fluorescent fabrics, retro-reflective tapes, 3rd party testing care labels, marking, and other requirements, the same standards for high visibility public safety are nearly identical.  The required amount of retro-reflective material is the same (201 square inches).

Our next segment will explain the details of the 207-2006 vests that Public Safety Workers felt would better meet their needs.  Stay tuned…………………